Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.986
The WAGO 231-602/023-000 is a 2-pole feedthrough PCB terminal block designed for reliable conductor connections in industrial electronics, control panels and printed circuit board assemblies. Part of the WAGO 231 Series, this terminal block combines proven CAGE CLAMP® spring pressure connection technology with a practical mounting flange arrangement for secure installation.
Featuring a 5 mm pin spacing, conductor capacity up to 2.5 mm² and screwdriver-actuated CAGE CLAMP® connections, the 231-602/023-000 provides a convenient method of connecting field wiring to electronic equipment. Its grey insulating housing and integrated clamping collars support dependable conductor retention and organised wiring.
The terminal block is specifically designed for feedthrough applications with fixing flanges, allowing installation through an enclosure panel or onto a printed circuit board. Its flush-mounting configuration supports panel thicknesses up to 1.5 mm. With an IEC rated current of 16 A and rated voltages of up to 630 V under specified insulation coordination conditions, it is suitable for a wide range of industrial control and electronic applications.
The WAGO 231-602/023-000 uses screwdriver-actuated CAGE CLAMP® technology to provide secure conductor connections without relying on conventional screw-clamping pressure. The spring pressure connection helps maintain consistent contact force, while the clamping collar arrangement supports controlled conductor termination.
Its feedthrough mounting configuration is particularly useful for connecting external wiring to internal electronic assemblies. The integrated mounting flanges allow the terminal block to be positioned at a suitable PCB or enclosure interface, including flush-mounted panel arrangements for material thicknesses up to 1.5 mm.
For dependable operation, conductors should be stripped to the specified length and inserted using the appropriate operating tool. Equipment designers must ensure that the terminal block's current, voltage, insulation and mounting requirements are compatible with the complete installation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Manufacturer part number | 231-602/023-000 | |
| Product type | Feedthrough PCB terminal block | |
| Connection technology | CAGE CLAMP® | |
| Connection design | Spring pressure connection with clamping collar | |
| Actuation type | Operating tool / screwdriver | |
| Number of potentials | 2 | |
| Total number of clamping points | 2 | |
| Number of rows | 1 | |
| Pin spacing | 5 mm | |
| Minimum conductor cross-section | 0.08 mm² | |
| Maximum conductor cross-section | 2.5 mm² | |
| Conductor size range | 28–14 AWG | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor stripping length | 8 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group C) | 15 A | |
| Rated voltage (UL 1059, use group C) | 150 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (CSA, use group B) | 15 A | |
| Rated voltage (CSA, use group B) | 300 V | |
| Rated current (CSA, use group C) | 15 A | |
| Rated voltage (CSA, use group C) | 150 V | |
| Rated current (CSA, use group D) | 10 A | |
| Rated voltage (CSA, use group D) | 300 V | |
| Mounting type | Mounting flanges | |
| Installation options | PCB mounting or front-panel mounting | |
| Panel installation | Flush mounting | |
| Maximum panel thickness | 1.5 mm | |
| Width | 25.2 mm | |
| Height | 19 mm | |
| Depth | 19.1 mm | |
| Weight | Approximately 3.9 g | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Standard packaging quantity | 100 pieces | |
| GTIN / EAN | 4044918278997 | |
| Country of origin | Germany | |
| Applicable electrical standards | IEC/EN 60664-1, UL 1059 and CSA | |
| Environmental compliance | RoHS compliant |
The WAGO 231-602/023-000 is a 2-pole feedthrough PCB terminal block used to connect electrical conductors to industrial electronic equipment, printed circuit boards and enclosure-mounted control assemblies.
The terminal block has 2 poles and 2 independent electrical potentials, with a 5 mm pin spacing.
The terminal block accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², corresponding to the specified 28–14 AWG conductor range. The required stripping length is 8 mm.
It uses WAGO CAGE CLAMP® spring pressure connection technology with a clamping collar. A suitable operating tool or screwdriver is used to open the clamp for conductor insertion or removal.
The terminal block has an IEC rated current of 16 A, rated voltages of 320 V or 630 V depending on the insulation coordination conditions, and a 4 kV rated impulse voltage.
Yes. The terminal block features integrated fixing flanges for PCB or front-panel mounting. Its flush-mounting configuration is designed for suitable enclosure panels with a thickness of up to 1.5 mm.
The 231-602/023-000 is a feedthrough terminal block with direct CAGE CLAMP® conductor connections and fixing flanges. A pluggable male PCB header instead provides a mating interface for a separate female connector. These products serve different wiring and installation requirements.
WAGO 231 Series feedthrough PCB terminal blocks combine proven CAGE CLAMP® spring pressure connection technology with practical panel-mounting options, providing industrial equipment manufacturers and control engineers with reliable solutions for electrical wiring interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.