Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.39
The WAGO 231-602/018-000 is a reliable 2-pole pluggable male connector with CAGE CLAMP® spring connection technology, designed for secure electrical connections in industrial automation, electrical control systems and electronic equipment. As part of the established WAGO MCS MIDI Classic 231 series, this connector features a 5 mm pin spacing, a grey insulating housing and integrated snap-in mounting feet for convenient DIN-35 rail and panel installation.
The WAGO 231-602/018-000 provides a dependable interface for connecting electrical conductors to compatible female connectors and PCB-mounted connection systems. Its CAGE CLAMP® spring pressure connection eliminates the need for conventional terminal screws, maintaining consistent conductor contact pressure while simplifying wiring and maintenance. The connector supports solid and fine-stranded conductors up to 2.5 mm², making it suitable for industrial power distribution, control wiring and signal connections within its specified electrical ratings.
With a 12 A IEC rated current, a 5 mm contact pitch and a 2-pole configuration, the WAGO 231-602/018-000 offers a practical solution for modular electrical installations. Its integrated snap-in mounting feet allow secure installation on suitable DIN-35 mounting arrangements and panels, while the pluggable male interface supports efficient equipment assembly, servicing and component replacement.
The WAGO 231-602/018-000 is designed to provide reliable conductor-to-connector connections in industrial electrical installations. Its CAGE CLAMP® technology uses a spring pressure mechanism to maintain secure electrical contact between the conductor and internal contact components. This helps resist loosening caused by vibration and normal operating conditions while eliminating the need for periodic screw retightening.
Unlike a permanently soldered PCB terminal block, the WAGO 231-602/018-000 is a pluggable male connector with snap-in mounting feet. It can be installed in suitable DIN-35 rail and panel mounting arrangements and connected to compatible female connector components. This configuration supports modular equipment design, convenient cable pre-assembly and straightforward maintenance of industrial control systems.
The connector's two-pole arrangement provides two independent conductor connections within a compact housing. Its 5 mm pitch, durable tin-plated contacts and flame-retardant PA66 insulation make it suitable for industrial machinery, automation equipment and electrical control assemblies. The WAGO MCS MIDI Classic system includes connectors without load-breaking capability; therefore, the connector must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 2 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-602/018-000 | |
| Product type | Pluggable male connector / terminal block plug | |
| Connector gender | Male | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of potentials | 2 | |
| Number of levels | 1 | |
| Number of conductor connections per pole | 1 | |
| Contact arrangement | Single row | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Conductor connection direction | 180° relative to mating direction | |
| Connection actuation | Operating tool | |
| Mounting type | DIN-35 rail / panel mounting | |
| Mounting mechanism | Integrated snap-in mounting feet | |
| Connector interface | Pluggable male contact pins | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Connector width | 13.2 mm | |
| Insulation height | 14.3 mm | |
| Connector depth | 27.5 mm | |
| Packaging quantity | 100 pieces per standard packaging unit | |
| Country of origin | Germany | |
| Applicable connector standards | IEC 61984 / EN 61984 |
The WAGO 231-602/018-000 is a 2-pole pluggable male connector used for secure electrical connections in industrial automation, control panels and electronic equipment. It features CAGE CLAMP® spring termination and snap-in mounting feet for suitable DIN-35 rail and panel installations.
The connector has 2 poles with two independent electrical potentials and a 5 mm contact pitch. Each pole provides one conductor connection.
The WAGO 231-602/018-000 has an IEC rated current of 12 A and a UL rated current of 15 A. The applicable rating depends on the relevant certification, installation conditions and electrical system requirements.
The connector accepts solid and fine-stranded conductors with cross-sections from 0.08–2.5 mm², corresponding to the specified 28–12 AWG conductor range. Conductor preparation and ferrule selection must follow the manufacturer's installation requirements.
The connector features integrated snap-in mounting feet for suitable DIN-35 rail and panel mounting arrangements. Unlike a solder-mounted PCB header, this male connector uses a pluggable interface and CAGE CLAMP® conductor termination.
CAGE CLAMP® is WAGO's spring pressure connection technology, which secures conductors without conventional terminal screws. The spring mechanism maintains consistent contact pressure and supports reliable electrical connections in industrial environments.
The WAGO 231-602/018-000 has a specified temperature limit range of −60 to +100 °C. The connector must be installed and operated within the manufacturer's applicable electrical and environmental limits.
No. The WAGO MCS MIDI Classic connector system includes connectors without load-breaking capability. The WAGO 231-602/018-000 must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
The WAGO 231-602/018-000 is designed for use with suitable WAGO MCS MIDI Classic female connector components featuring a compatible 2-pole configuration and 5 mm pitch. Mechanical compatibility, coding arrangements and applicable electrical ratings should be checked before selecting a mating connector.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical connections for industrial automation, machine building and electrical control systems. The WAGO 231-602/018-000 combines proven CAGE CLAMP® spring connection technology, a compact 2-pole design and practical snap-in mounting features to support reliable installation and maintenance in modern industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.