Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.986
The WAGO 231-602/017-000 is a compact and reliable 2-pole PCB terminal block with CAGE CLAMP® spring connection technology, designed for secure electrical connections in industrial automation, electronic equipment and control systems. As part of the established WAGO 231 series, this connector features a 5 mm pin spacing, a grey insulating housing and integrated mounting flanges for dependable installation in printed circuit board and through-panel applications.
The WAGO 231-602/017-000 provides a secure connection between external conductors and PCB-mounted electrical circuits. Its CAGE CLAMP® spring pressure connection eliminates the need for conventional screw terminals, helping maintain reliable conductor contact while reducing maintenance requirements. The connector accepts solid and fine-stranded conductors up to 2.5 mm², making it suitable for a wide range of industrial wiring requirements.
Featuring two connection poles, 5 mm contact spacing and angled solder pins, this terminal block is designed for efficient integration into industrial electronic assemblies. Its through-hole PCB mounting arrangement and fixing flanges provide additional mechanical support, while the flame-retardant polyamide housing ensures durability in demanding electrical environments.
The WAGO 231-602/017-000 is engineered to provide dependable conductor-to-PCB connections in industrial electrical systems. Its CAGE CLAMP® technology uses spring pressure to maintain a secure connection between the conductor and the internal electrical contact, helping resist loosening caused by vibration and normal operating conditions. Unlike conventional screw terminal connections, the spring clamp mechanism does not require periodic screw retightening.
The connector's two-pole configuration provides two independent electrical connection points, making it suitable for power, signal and control wiring where the applicable electrical ratings are observed. Its 5 mm pitch supports compact circuit board layouts, while the angled solder pin arrangement allows conductors to enter parallel to the PCB surface.
Designed for PCB and through-panel mounting, the WAGO 231-602/017-000 incorporates fixing flanges that provide additional mechanical support in equipment assemblies. The use of flame-retardant PA66 insulation, tin-plated copper contacts and chrome-nickel spring steel ensures dependable performance in industrial control equipment, automation modules and electronic assemblies.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Model | 231-602/017-000 | |
| Product type | PCB terminal block / through-panel PCB terminal strip | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Number of potentials | 2 | |
| Number of connection points | 2 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Pin spacing | 5 mm | |
| Rated voltage (IEC, category III) | 320 V | |
| Rated voltage (IEC, category II, pollution degree 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL/CSA) | 300 V | |
| Rated current (UL/CSA, Use Group B) | 15 A | |
| Conductor cross-section, solid | 0.08–2.5 mm² | |
| Conductor cross-section, fine-stranded | 0.08–2.5 mm² | |
| Conductor cross-section with insulated ferrule | 0.25–1.5 mm² | |
| Conductor cross-section with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 28–14 AWG | |
| Wire stripping length | 8–9 mm | |
| Connection actuation | Operating tool | |
| Conductor connection direction to PCB | 0° | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB termination | Solder connection | |
| Solder pin arrangement | In-line | |
| Solder pins per potential | 1 | |
| Solder pin length | 4.7 mm | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Recommended drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Maximum PCB thickness | 1.5 mm | |
| Mounting type | PCB mounting / panel mounting / through-panel mounting | |
| Width | 25.2 mm | |
| Height | 19 mm | |
| Depth | 19.1 mm | |
| Height above PCB surface | 14.3 mm | |
| Dimensions (W × H × D) | 25.2 × 19 × 19.1 mm | |
| Weight | approx. 3.7 g | |
| Housing material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Fire load | 0.141 MJ | |
| Packaging quantity | 100 pieces per standard sales packaging unit |
The WAGO 231-602/017-000 is a 2-pole PCB terminal block designed to connect electrical conductors directly to printed circuit boards in industrial automation, control equipment and electronic assemblies. It uses CAGE CLAMP® spring connection technology and supports PCB and through-panel mounting.
The connector features 2 poles with two independent electrical potentials, arranged on a single level with a 5 mm pin spacing.
The WAGO 231-602/017-000 accepts solid and fine-stranded conductors from 0.08–2.5 mm². Fine-stranded conductors fitted with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to hold electrical conductors securely without conventional terminal screws. The spring mechanism maintains contact pressure and provides a reliable electrical connection in industrial environments.
The connector is designed for through-hole PCB solder mounting and includes integrated fixing flanges for panel and through-panel installation. Its angled solder pins provide an electrical connection to the PCB while supporting convenient conductor access.
The recommended wire stripping length is 8–9 mm. Conductors should be prepared according to WAGO's installation instructions before being inserted into the spring clamp connection.
The WAGO 231-602/017-000 features a grey polyamide 66 (PA66) housing with a UL94 V-0 flammability classification. The electrical contacts are made from tin-plated electrolytic copper, and the clamping springs are manufactured from chrome-nickel spring steel.
Yes. The connector is suitable for industrial automation, PCB-based control equipment, machine electronics and panel-mounted assemblies where secure conductor connections and compact installation are required. The circuit must operate within the connector's applicable voltage, current and environmental ratings.
WAGO 231 series PCB terminal blocks provide reliable electrical connectivity for industrial automation, electronic control systems and equipment manufacturing. The WAGO 231-602/017-000 combines proven CAGE CLAMP® spring connection technology, a compact 2-pole design and secure PCB mounting features to support dependable operation in modern industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.