Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.9435
The WAGO 231-565/001-000 is a 5-pole angled male PCB header from the WAGO MCS MIDI Classic 231 Series, designed to provide reliable, detachable electrical connections in industrial electronics, automation equipment and printed circuit board assemblies. Its shrouded male connector interface is designed for use with compatible WAGO pluggable female connectors.
Featuring a 5.08 mm contact pitch, angled mating orientation and 1.2 × 1.2 mm square solder pins, the 231-565/001-000 uses conventional through-hole technology (THT) for secure PCB mounting. Its orange polyamide housing, integrated variable coding capability and anti-rotation protection support dependable mechanical integration and organised connector arrangements.
With an IEC rated current of 16 A, rated voltages of up to 630 V under specified insulation coordination conditions and a 4 kV rated surge voltage, this male header is suitable for industrial control electronics, modular automation systems and PCB-based electrical interfaces. Its angled configuration allows compatible mating connectors to connect parallel to the printed circuit board.
The WAGO MCS MIDI Classic connector system provides dependable, detachable electrical connections between printed circuit boards and external wiring assemblies. The WAGO 231-565/001-000 uses robust square through-hole solder pins to establish permanent electrical connections to PCB conductors, while its shrouded male interface enables compatible female connectors to be attached or removed during equipment assembly and maintenance.
The connector's angled mating arrangement enables connections parallel to the PCB surface, making it particularly suitable for electronic equipment requiring side-entry wiring or compact component layouts. Its tin-plated electrolytic copper contacts, PA66 housing, variable coding capability and anti-rotation protection support reliable electrical performance and consistent mechanical integration.
As part of the WAGO MCS connector system, this component is intended for electrical connections without breaking capacity. Mating and unmating must be performed in a de-energised condition, and equipment designers must ensure that accessible male contacts cannot become hazardous when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic, 231 Series | |
| Model | 231-565/001-000 | |
| Product type | THT male PCB header | |
| Connector technology | Through-hole technology (THT) | |
| Number of potentials | 5 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Pin spacing | 5.08 mm | |
| Connector orientation | Angled | |
| Mating direction relative to PCB | 0° (parallel) | |
| Mounting type | PCB through-hole mounting | |
| Termination type | Solder pins | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder pin length | 3.8 mm | |
| Drilled hole diameter | 1.7 mm (+0.1 mm) | |
| Solder pin arrangement | In-line | |
| Solder pins per potential | 1 | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 250 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Temperature range | −60 to +100 °C | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Contact gender | Male | |
| Housing configuration | Shrouded | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Mismating protection | No | |
| Width | 28.52 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Standard packaging quantity | 200 pieces | |
| Applicable standards | IEC/EN 61984, UL 1059, UL 1977 |
The WAGO 231-565/001-000 is a 5-pole angled male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial electronics, automation equipment and control systems.
The connector features 5 poles with a 5.08 mm contact pitch, providing five separate electrical connection potentials through one PCB-mounted header.
The connector has an IEC rated current of 16 A and rated voltages of 250 V, 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. Its rated surge voltage is 4 kV.
The connector uses through-hole solder mounting with 1.2 × 1.2 mm square solder pins and a 3.8 mm solder pin length. WAGO specifies a 1.7 mm drilled hole diameter with a +0.1 mm tolerance.
The connector has an angled mating interface with a mating direction of 0° relative to the PCB surface, allowing a compatible female connector to be inserted parallel to the printed circuit board.
The WAGO 231-565/001-000 is designed for use with compatible 5-pole female connectors from the WAGO MCS MIDI Classic system featuring matching 5.08 mm contact pitch and mating geometry. Coding arrangements and electrical ratings should be checked before installation.
No. The WAGO MCS MIDI Classic connector system includes connectors without breaking capacity. The connector must be mated and unmated only when de-energised, and accessible male contacts must not remain live when the mating connector is removed.
WAGO MCS MIDI Classic PCB connectors provide industrial equipment manufacturers, electronics engineers and automation specialists with dependable electrical connectivity, robust through-hole mounting and flexible modular wiring interfaces for industrial control and electronic systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.