Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.84
The WAGO 231-554/001-000 is a professional 24-pole angled male PCB header designed for reliable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5.08 mm contact pitch, 1.0 × 1.0 mm square solder pins and a distinctive orange insulating housing.
Designed for through-hole technology (THT), the WAGO 231-554/001-000 provides a permanent soldered connection to a printed circuit board while offering a detachable mating interface for a compatible female connector. Its angled solder pin construction supports horizontal mating relative to the PCB, making it suitable for equipment requiring organised side-entry wiring and high-density multi-circuit connections.
With a 12 A rated current under specified IEC conditions, voltage ratings of 320 V or 630 V depending on the installation category, and a four-sided shrouded contact interface, this WAGO PCB connector provides a practical solution for industrial control systems, modular electronic equipment and multi-channel wire-to-board applications.
Electrical rating note: The 630 V IEC rating applies to overvoltage category II, pollution degree 2, while the 320 V IEC rating applies to category III/3 and III/2. Some distributor listings also specify 16 A IEC, 15 A UL and 600 V UL ratings. These figures must not be treated as interchangeable; always use the manufacturer's applicable rating table for the intended connector assembly and installation conditions.
The WAGO 231-554/001-000 provides a dependable electrical interface between a printed circuit board and a compatible pluggable female connector. Its twenty-four angled solder pins are inserted into correctly prepared PCB holes and soldered into position, creating permanent electrical and mechanical connections.
The connector uses 1.0 × 1.0 mm square solder pins with a 3.8 mm pin length. These pins are designed for through-hole mounting and provide a mechanically stable interface with the PCB when installed using the correct footprint and soldering process.
The 5.08 mm contact pitch provides twenty-four individual connection positions arranged in a single row. With twenty-three intervals between the first and last contacts, the contact-centre span is 116.84 mm.
Its angled construction allows a compatible female connector to approach horizontally relative to the printed circuit board. This configuration is useful for equipment requiring side-entry wiring, particularly where multiple control or signal circuits must be connected through a single removable interface.
The four-sided shrouded housing helps guide the mating connector and provides a defined contact interface. Coding fingers and anti-rotation protection support connector positioning and assembly organisation.
The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the orange PA66 insulating housing offers mechanical protection and electrical insulation. The housing has a UL 94 V-0 flammability classification.
With a specified operating temperature range of -60 to +100 °C, the WAGO 231-554/001-000 can be incorporated into industrial electronic equipment designed to operate within the manufacturer's stated limits.
The WAGO 231-554/001-000 uses through-hole technology (THT) with 1.0 × 1.0 mm square solder pins. The manufacturer's dimensional information specifies a 1.4 mm drilled hole diameter with a positive tolerance of 0.1 mm. The final PCB footprint should follow the latest WAGO dimensional drawing and the PCB manufacturer's fabrication requirements.
Its 125.04 mm overall width, 12.2 mm height and 12 mm depth should be considered when planning PCB placement, enclosure dimensions and cable routing. The 8.4 mm height above the PCB surface is also relevant when positioning adjacent components.
Because the connector contains twenty-four contact positions, accurate PCB hole alignment and suitable mechanical support during soldering are particularly important. Designers should also provide sufficient clearance for the mating connector, attached conductors and cable bend radius.
Important termination distinction: The WAGO 231-554/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology, depending on the selected mating component.
Before choosing a mating connector, verify the 24-pole configuration, 5.08 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5 mm pitch should not automatically be considered interchangeable with this 5.08 mm pitch header.
Important safety information: Pluggable connectors without breaking capacity must not be mated or unmated while live or under load. Safely isolate the circuit before connection or disconnection, and ensure the equipment design prevents accessible male contacts from remaining hazardous when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 24 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-554/001-000 | |
| EAN / GTIN | 4044918867702 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | THT male PCB header | |
| Connector configuration | Angled | |
| Connector gender | Male | |
| Number of contacts | 24 | |
| Number of potentials | 24 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage (IEC, III/3) | 4 kV | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated impulse voltage (IEC, III/2) | 4 kV | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Angled | |
| Mating direction | Horizontal relative to the PCB | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 3.8 mm | |
| Recommended drilled hole diameter | 1.4 mm, tolerance +0.1 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Housing configuration | Four-sided shrouded | |
| Connector coding | Coding fingers | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Processing temperature range | -35 to +60 °C | |
| Overall width | 125.04 mm | |
| Overall height | 12.2 mm | |
| Overall depth | 12 mm | |
| Height above PCB surface | 8.4 mm | |
| Contact-centre span | 116.84 mm | |
| Manufacturer-listed weight | Approximately 7.5 g | |
| Manufacturer packaging unit | 50 pieces | |
| Packaging type | Box | |
| Country of origin | Poland | |
| RoHS compliance | Compliant, no exemption | |
| Relevant approvals | IEC 61984, EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-554/001-000 is a 24-pole angled male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5.08 mm contact pitch, 1.0 × 1.0 mm solder pins and an orange insulating housing.
The connector has 24 poles, providing twenty-four male electrical contacts arranged in a single row at a 5.08 mm pitch.
The manufacturer identifies the WAGO 231-554/001-000 as an angled male PCB header. Its mating interface is designed for horizontal connection relative to the printed circuit board.
The manufacturer datasheet specifies a 12 A rated current under the stated IEC conditions. Some distributor listings provide additional ratings of 16 A IEC and 15 A UL. The applicable rating depends on the approval conditions and complete connector assembly.
The connector has a 320 V IEC rating under category III/3 and III/2 conditions, and a 630 V IEC rating under category II/2 conditions. The permitted operating voltage depends on the installation category and complete connection system.
The WAGO 231-554/001-000 has a 5.08 mm contact pitch, equivalent to 0.2 inch. This differs from 5 mm pitch connector variants.
The connector uses through-hole technology (THT). Its solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.
No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination.
The connector measures 125.04 mm wide, 12.2 mm high and 12 mm deep, with a height of 8.4 mm above the PCB surface. The distance between the first and last contact centres is 116.84 mm.
Do not mate or unmate the connector while live or under load unless the complete system is specifically approved for that operation. Isolate the circuit before connection or disconnection, and prevent accessible male contacts from remaining hazardous when unmated.
The WAGO 231-554/001-000 combines robust through-hole solder termination, a practical angled mating interface and twenty-four organised contact positions, helping engineers and equipment manufacturers create modular, service-friendly industrial electronic assemblies.
Manufacturer documentation: WAGO 231-554/001-000 datasheet. Refer to the latest manufacturer documentation for final electrical ratings, PCB footprint dimensions and mating connector compatibility.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.