Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.42
The WAGO 231-551/001-000 is a 21-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electronic equipment and printed circuit board assemblies, this connector provides a reliable pluggable interface between a PCB and a compatible female cable connector.
Featuring a 5.08 mm contact pitch, 1 × 1 mm square solder pins and an angled mating arrangement, the WAGO 231-551/001-000 supports horizontal connector access and efficient cable routing. Its orange polyamide insulating housing, tin-plated copper contacts and shrouded mating interface make it suitable for industrial automation, electronic control systems and OEM equipment.
With an IEC rated current of 12 A and a rated voltage of 320 V under overvoltage category III, pollution degree 2 conditions, this 21-position PCB header supports appropriately designed industrial power and control circuits. A rated voltage of up to 630 V applies under the specified IEC category II/2 conditions.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connection solutions for industrial electronics, automation systems and printed circuit board assemblies. Its range of male PCB headers and compatible female connectors enables equipment manufacturers to create detachable electrical interfaces between electronic circuits and external wiring.
The WAGO 231-551/001-000 combines 21 electrical contact positions with a 5.08 mm pitch and an angled through-hole mounting arrangement. Its horizontal mating direction makes it particularly useful for compact equipment enclosures, industrial controllers and electronic assemblies where cables need to be routed parallel to the PCB surface.
With dimensions of 109.8 mm wide, 12.2 mm high and 12 mm deep, the connector provides a practical interface for multiple electrical circuits. The 1 × 1 mm square solder pins are designed for conventional through-hole soldering, helping establish permanent electrical and mechanical connections to the printed circuit board.
The orange polyamide 66 insulating housing has a UL 94 V-0 flammability classification. Tin-plated electrolytic copper contacts provide the electrical mating interface, while the four-sided shrouded construction helps guide a compatible female connector into position.
Integrated coding fingers and anti-rotation protection support reliable connector assembly. These features are particularly useful in modular equipment where connector identification and consistent positioning are important.
Unlike female cable connectors that may incorporate WAGO's CAGE CLAMP® spring pressure connection technology, this male PCB header does not directly terminate external conductors. It connects to the PCB through soldered pins, while the separately selected female connector provides the external wiring interface.
Important safety information: WAGO MCS connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating connector, and equipment design must prevent accessible male contacts from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 21 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-551/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Total number of potentials | 21 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° / horizontal | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 3.8 mm | |
| IEC rated current | 12 A | |
| IEC rated voltage (III/2) | 320 V | |
| IEC rated voltage (II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 109.8 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Insulation height above PCB | 8.4 mm | |
| Weight | Approximately 6.85 g | |
| Contact arrangement | Single-row, shrouded male contacts | |
| Connector coding | Coding fingers | |
| Anti-rotation protection | Yes | |
| PCB mounting method | Through-hole solder mounting | |
| RoHS compliance | Compliant | |
| Country of origin | Germany | |
| Standard packaging unit | 50 pieces | |
| GTIN / EAN | 4044918867603 | |
| Relevant standards | IEC 61984, EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-551/001-000 is a 21-pole angled male PCB header used to create detachable electrical connections between printed circuit boards and compatible WAGO MCS MIDI Classic female connectors.
The connector has 21 poles, providing twenty-one independent electrical contact positions arranged in a single row.
The connector has a 5.08 mm contact pitch, equivalent to 0.2 inches. Compatible mating connectors must have the correct contact spacing and geometry.
It is an angled, right-angle male PCB header. WAGO specifies a horizontal mating direction relative to the PCB, allowing connected wiring to extend parallel to the board.
The connector uses through-hole technology (THT). Its square solder pins are inserted into suitable PCB holes and soldered to provide permanent electrical and mechanical connections.
The connector has an IEC rated current of 12 A. The permissible current in a complete installation depends on the mating connector, conductor size, ambient temperature and applicable derating requirements.
The connector is rated at 320 V under IEC overvoltage category III, pollution degree 2 conditions, and up to 630 V under category II, pollution degree 2 conditions.
The WAGO 231-551/001-000 uses 1 × 1 mm square solder pins with a length of 3.8 mm.
The connector measures 109.8 mm wide, 12.2 mm high and 12 mm deep. Its insulating housing extends approximately 8.4 mm above the PCB surface.
The connector has an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts.
The specified temperature limit range is −60 to +100 °C. Actual operating conditions must also account for the mating connector, PCB design, electrical loading and installation environment.
No. This product is a male PCB header with solder pins. External conductors are terminated in a separately selected compatible female cable connector.
Yes. The connector incorporates coding fingers and anti-rotation protection, supporting suitable connector identification and assembly arrangements.
The header is designed for use with appropriately matched 21-pole WAGO MCS MIDI Classic female connectors having a 5.08 mm pitch and compatible mating geometry. The exact counterpart should be confirmed using WAGO's mating connector documentation.
Both are 21-pole angled THT male PCB headers with 1 × 1 mm solder pins. The 231-551/001-000 has a 5.08 mm pitch and orange housing, while the 231-451/001-000 has a 5 mm pitch and grey housing. Their mating connectors and PCB footprints must be selected accordingly.
No. WAGO MCS connectors are not intended for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating connector.
The GTIN is 4044918867603, which identifies the manufacturer product for ordering and stock management.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel builders and industrial automation equipment manufacturers. The WAGO 231-551/001-000 combines twenty-one electrical contacts, angled through-hole solder termination and a 5.08 mm pitch to provide a practical, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.