Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.13
The WAGO 231-549/001-000 is a 19-pole angled male PCB header from the WAGO MCS MIDI Classic Series 231. Designed for industrial pluggable wire-to-board connections, it features 5.08 mm contact spacing, 1.0 × 1.0 mm square solder pins and a distinctive orange insulating housing.
Its right-angle configuration allows a compatible female connector to mate parallel to the printed circuit board, making it suitable for control electronics, industrial equipment and PCB assemblies where wiring needs to enter from the side.
With through-hole technology (THT), a four-sided shrouded mating interface and tin-plated electrolytic copper contacts, the WAGO 231-549/001-000 provides a practical, detachable connection between a printed circuit board and a compatible 19-pole female connector.
Technical note: Third-party catalogue listings for this part are inconsistent on current rating and some orientation-related details. The 12 A value above follows the exact-part RS listing. Confirm final electrical ratings, solder-pin projection and PCB drill requirements using the current WAGO manufacturer datasheet before production use.
The WAGO 231-549/001-000 has 19 contacts spaced at 5.08 mm. The distance between the centre of the first and last contacts is:
(19 − 1) × 5.08 mm = 91.44 mm
WAGO's published dimensional relationships for this angled connector family include:
Applying these family drawing relationships to the 19-pole version gives the following reference dimensions:
These are calculated drawing references, not independently verified overall dimensions for the exact product. The manufacturer's dimensioned drawing should be used to confirm the housing envelope, solder-pin positions, PCB hole pattern and required assembly clearances.
The WAGO 231-549/001-000 provides a detachable electrical interface between a printed circuit board and a compatible female pluggable connector. Its nineteen solder pins are installed through correctly prepared PCB holes and soldered to the circuit board.
The angled configuration positions the mating interface parallel to the PCB surface. This arrangement is useful where wiring needs to enter from the side of a control module or where vertical clearance is restricted.
The connector's 5.08 mm contact pitch is an important selection characteristic. WAGO also manufactures headers with 5 mm spacing, and these should not be assumed interchangeable. The selected mating connector must have the correct contact pitch, pole count and mechanical geometry.
The four-sided shrouded housing helps align the mating connector and provides mechanical protection around the male contacts. The orange polyamide housing separates adjacent electrical positions, while tin-plated electrolytic copper contacts form the conductive interface.
Coding fingers can support appropriate connector identification arrangements. This is useful in equipment containing multiple similar pluggable connections, although coding arrangements must be checked for compatibility with the selected female connector.
The WAGO 231-549/001-000 is a PCB-mounted male header and does not accept stripped conductors directly. External wiring must be terminated using a suitable female connector, which may incorporate WAGO spring-pressure connection technology.
Electrical safety: This connector family is not intended for connection or disconnection while live or under load unless the complete assembly is specifically approved for that operation. Circuit design must prevent accessible male contacts from remaining hazardous when unmated.
The WAGO 231-549/001-000 is specifically a 19-pole angled THT male header with 5.08 mm pitch, 1.0 × 1.0 mm solder pins and an orange housing.
It differs from the WAGO 231-548/001-000, which has 18 poles, and the WAGO 231-550/001-000, which has 20 poles. Although these products belong to the same general connector family, their electrical position counts and PCB footprints differ.
It also differs from the WAGO 231-349/001-000, which is a 19-pole header with straight solder pins rather than the angled configuration of the 231-549/001-000.
When choosing a mating connector, confirm the exact 19-pole arrangement, 5.08 mm pitch, shroud geometry, coding requirements and electrical ratings. Pole count and pitch alone do not guarantee full mechanical compatibility.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 19 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-549/001-000 | |
| Product family | MCS MIDI Classic | |
| Series | 231 | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of electrical positions | 19 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm / 0.2 in | |
| Connector orientation | Angled / right-angle | |
| Mating direction | Parallel to PCB surface | |
| Mounting technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin cross-section | 1.0 × 1.0 mm | |
| Rated current | 12 A, as listed by RS; verify against the latest WAGO datasheet | |
| Maximum listed IEC voltage | 630 V, subject to applicable installation conditions | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide (PA66) | |
| Housing construction | Four-sided shrouded | |
| Flammability classification | UL94 V-0 | |
| Minimum material temperature | −60 °C | |
| Maximum material temperature | +100 °C | |
| Insulation height | 8.4 mm | |
| Coding fingers | Yes | |
| Anti-rotation protection | Yes | |
| RoHS compliance | Yes | |
| Standard packaging unit | 50 pieces | |
| Country of origin | Germany, according to RS | |
| GTIN / EAN | Confirm against current manufacturer documentation |
The WAGO 231-549/001-000 is a 19-pole angled THT male PCB header from the MCS MIDI Classic Series 231, featuring 5.08 mm contact spacing, 1.0 × 1.0 mm solder pins and an orange housing.
It has 19 poles, providing nineteen separate electrical connection positions in a single row.
The connector has a nominal contact pitch of 5.08 mm, equivalent to 0.2 inches.
It is an angled, right-angle male PCB header. The mating connector approaches parallel to the PCB surface.
It uses through-hole technology (THT). Its solder pins are inserted through prepared PCB holes and soldered to the circuit board.
The connector uses 1.0 × 1.0 mm square solder pins. Confirm the exact solder-pin length and PCB drill requirements from the manufacturer drawing.
RS lists the WAGO 231-549/001-000 at 12 A. Because some third-party catalogues provide different values, the latest WAGO datasheet should be consulted for the final application rating.
Distributor specifications list a maximum IEC voltage of 630 V. The permitted voltage depends on the applicable overvoltage category, pollution degree and complete connector assembly.
The connector features an orange polyamide insulating housing.
No. The male header itself uses solder-pin PCB termination. A compatible female connector may use WAGO CAGE CLAMP® spring-pressure technology for external conductors.
Yes. It features a four-sided shrouded mating interface designed to help guide and protect the male contacts.
Both are 19-pole Series 231 male PCB headers with 5.08 mm pitch. The 231-549/001-000 is angled, while the 231-349/001-000 is a straight header. Their PCB layouts and mating orientations differ.
The 231-549/001-000 has 19 poles, while the 231-550/001-000 has 20 poles. Both belong to the angled, orange, 5.08 mm-pitch header family, but their footprints and contact counts differ.
Select a compatible 19-pole female connector with 5.08 mm pitch and the correct mating geometry and coding arrangement. Verify the exact female connector part number against WAGO documentation.
No, not as a normal operating procedure. The MCS connector family is not designed for load-breaking unless the complete assembly is expressly approved for that use. Follow appropriate electrical isolation procedures.
The WAGO 231-549/001-000 combines nineteen electrical positions, 5.08 mm contact spacing, 1.0 × 1.0 mm solder pins and a shrouded orange housing in a right-angle THT male PCB header. It provides a practical connection interface for compatible industrial wire-to-board systems requiring a high pole count.
Manufacturer reference: WAGO 231-549/001-000 Product Information
Technical reference: WAGO 231-549/001-000 Specifications – RS
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.