Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.97
The WAGO 231-548/001-000 is a high-quality 18-pole angled male PCB header designed to provide reliable, detachable electrical connections in industrial electronics, automation equipment and printed circuit board assemblies. As part of the WAGO MCS MIDI Classic 231 Series, this connector offers a dependable interface between printed circuit boards and compatible pluggable female connectors.
Featuring a 5.08 mm pin spacing, 90° angled mating orientation and 1.0 × 1.0 mm square solder pins, the 231-548/001-000 is designed for conventional through-hole technology (THT) PCB mounting. Its orange polyamide insulating housing and shrouded contact arrangement provide durable electrical insulation and help guide compatible mating connectors into position.
With 18 electrical poles, an IEC rated current of 12 A and rated voltages of up to 630 V under specified insulation coordination conditions, this male header is suitable for industrial control electronics, modular automation systems and PCB-based power and signal interfaces. Its right-angle construction enables convenient side-entry wiring in equipment where connectors must be mated parallel to the circuit board.
The WAGO MCS MIDI Classic connector system is designed to provide dependable, detachable electrical connections between printed circuit boards and external wiring assemblies. The WAGO 231-548/001-000 uses square through-hole solder pins to establish permanent electrical connections to PCB conductors, while its shrouded male mating interface allows compatible female connectors to be connected or removed during equipment assembly and maintenance.
The connector's 90° angled construction enables mating parallel to the PCB surface, making it particularly suitable for electronic equipment requiring side-entry wiring or reduced vertical clearance. Its tin-plated electrolytic copper contacts, durable PA66 housing and single-row 18-pole configuration support consistent electrical performance and organised multi-circuit connections.
As part of the WAGO MCS system, this connector is intended for applications without breaking capacity under IEC/EN 61984. It must not be connected or disconnected while live or under load. Equipment designers must also ensure that accessible male contacts cannot become live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 18 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic, 231 Series | |
| Model | 231-548/001-000 | |
| Product type | Angled male PCB header | |
| Connector technology | Through-hole technology (THT) | |
| Number of potentials | 18 | |
| Number of rows | 1 | |
| Pin spacing | 5.08 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° (parallel) | |
| Mounting type | PCB through-hole mounting | |
| Termination type | Solder pins | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 3.8 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Contact gender | Male | |
| Housing configuration | Shrouded / closed male header | |
| Width | Approximately 89.56 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Weight | Approximately 5.86 g | |
| Packaging quantity | 50 pieces | |
| Country of origin | Germany | |
| GTIN | 4044918867504 | |
| Connector standard | IEC/EN 61984 | |
| Environmental compliance | RoHS compliant |
The WAGO 231-548/001-000 is an 18-pole angled male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial electronics, automation equipment and control systems.
The connector features 18 poles arranged in a single row with a 5.08 mm contact pitch, providing eighteen separate electrical connection potentials through one PCB-mounted header.
The connector has an IEC rated current of 12 A and rated voltages of 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. Its rated impulse voltage is 4 kV.
The connector uses through-hole solder mounting with 1.0 × 1.0 mm square solder pins and a 3.8 mm solder pin length. The pins are inserted into suitable PCB holes and soldered to provide secure mechanical and electrical connections.
The WAGO 231-548/001-000 is an 18-pole angled male PCB header with mating parallel to the circuit board, while the 231-348/001-000 is the corresponding 18-pole straight male PCB header with mating perpendicular to the board. Both belong to the MCS MIDI Classic system and feature 5.08 mm contact spacing.
The header is designed for use with compatible 18-pole female connectors from the WAGO MCS MIDI Classic system with matching 5.08 mm contact pitch and mating geometry. Connector coding and electrical ratings should be checked before installation.
No. The WAGO MCS MIDI Classic connector system includes connectors without breaking capacity. The connector must not be mated or unmated while live or under load, and accessible male contacts must not remain live when disconnected.
WAGO MCS MIDI Classic PCB connectors provide industrial equipment manufacturers, electronics engineers and automation specialists with dependable electrical connectivity, secure through-hole mounting and practical modular wiring interfaces for modern industrial control and electronic systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.