231-545/001-000 Wago Male Connector, With Angled Solder Pins 15-Pole Orange

231-545/001-000 Wago Male Connector, With Angled Solder Pins 15-Pole Orange

SKU: 231-545/001-000MPN: 231-545/001-000
Price
List Price £3.03 ex VAT
Your Price (ex VAT) Save 15%
£2.58 15% OFF
You save £0.4545 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £2.58
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 50

£2.58

Why Choose the WAGO 231-545/001-000 15-Pole Angled Male PCB Header?

The WAGO 231-545/001-000 is a professional 15-pole angled male PCB header designed for reliable, pluggable electrical connections in industrial automation, electronic control systems and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5.08 mm contact pitch, 1.0 × 1.0 mm square solder pins and a distinctive orange polyamide insulating housing.

Designed for through-hole technology (THT), the WAGO 231-545/001-000 provides a permanent soldered connection to a printed circuit board while offering a detachable mating interface for a compatible female connector. Its angled construction supports horizontal mating relative to the PCB, making it particularly suitable for industrial electronic equipment requiring organised side-entry wiring.

With a 12 A rated current, 320 V IEC voltage rating under overvoltage category III, pollution degree 2 conditions, and four-sided shrouded contact interface, this WAGO connector is a dependable choice for multi-circuit industrial control and wire-to-board applications.

Key Advantages

  • 15-pole male PCB header: Provides fifteen separate electrical connection positions in a single connector.
  • Angled connector orientation: Enables horizontal mating and practical side-entry cable routing.
  • 5.08 mm contact pitch: Offers standard 0.2-inch spacing for compatible pluggable connection systems.
  • 12 A rated current: Supports appropriately designed industrial power and control circuits.
  • Through-hole solder termination: Creates permanent electrical and mechanical connections to the PCB.
  • 1.0 × 1.0 mm square solder pins: Provide a defined, mechanically stable PCB mounting interface.
  • Four-sided shrouded housing: Helps guide compatible mating connectors and protect the male contact interface.
  • Tin-plated copper contacts: Provide dependable electrical conductivity.
  • Integrated coding fingers: Support connector configuration and help distinguish connection points.
  • Orange housing: Provides clear visual identification within electronic assemblies.
  • Pluggable construction: Supports modular assembly, equipment maintenance and servicing.
  • Industrial temperature capability: Designed for operation between -60 and +100 °C.

Key Features

  • WAGO MCS MIDI Classic 231 Series.
  • 15-pole male PCB header.
  • Single-row contact arrangement.
  • 5.08 mm contact pitch (0.2 inch).
  • Angled solder pin construction.
  • Horizontal mating direction relative to the PCB.
  • 12 A rated current under IEC conditions.
  • 320 V rated voltage under IEC category III/3 conditions.
  • 320 V rated voltage under IEC category III/2 conditions.
  • 630 V rated voltage under IEC category II/2 conditions.
  • 4 kV rated impulse voltage.
  • 10 A UL 1059 current rating.
  • 300 V UL 1059 voltage rating.
  • 600 V UL 1977 voltage rating for factory wiring.
  • Through-hole PCB mounting.
  • 1.0 × 1.0 mm square solder pins.
  • 3.8 mm solder pin length.
  • Four-sided shrouded male contact interface.
  • Tin-plated electrolytic copper contacts.
  • Orange polyamide 66 insulating housing.
  • UL 94 V-0 flammability classification.
  • Operating temperature range from -60 to +100 °C.

Electrical rating note: The applicable voltage depends on the IEC overvoltage category and pollution degree. The 630 V rating applies to category II/2 and should not be treated as the universal operating voltage. Similarly, UL 1059 and UL 1977 ratings apply to different approval conditions. The electrical design must also account for the mating connector, PCB tracks, operating temperature and installation environment.

Reliable 12 A Angled Through-Hole PCB Connection Technology

The WAGO 231-545/001-000 provides a dependable connection between a printed circuit board and a compatible pluggable female connector. Its fifteen angled solder pins pass through suitable PCB holes and are soldered into position, creating permanent electrical and mechanical connections.

The connector uses 1.0 × 1.0 mm square solder pins with a 3.8 mm pin length. These pins are designed for through-hole mounting and provide a mechanically stable interface with the PCB when installed and soldered correctly.

The 5.08 mm contact pitch allows fifteen separate electrical connection positions to be arranged in a single row. With fourteen intervals between the first and last contacts, the total contact-centre span is 71.12 mm.

Its angled construction allows a compatible female connector to mate horizontally relative to the printed circuit board. This arrangement is particularly useful in industrial equipment where cable entry is required from the side or where the available vertical clearance is limited.

The four-sided shrouded housing helps guide the mating connector into position and provides a defined contact interface. Integrated coding fingers support connector configuration and can help reduce incorrect mating where suitable coding accessories are used.

The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the orange PA66 housing offers mechanical protection and electrical insulation. The housing has a UL 94 V-0 flammability classification.

With a specified operating temperature range of -60 to +100 °C, the WAGO 231-545/001-000 is suitable for industrial electronic assemblies designed to operate within these limits.

PCB Footprint, Soldering and Connector Compatibility

The WAGO 231-545/001-000 uses through-hole technology (THT) with 1.0 × 1.0 mm square solder pins. The manufacturer specifies a 1.4 mm drilled hole diameter with a tolerance of -0/+0.1 mm. The final PCB footprint should follow the latest WAGO dimensional drawing and the board manufacturer's fabrication requirements.

Its 79.32 mm overall width, 12.2 mm height and 12 mm depth should be considered when planning PCB placement and enclosure clearances. The 8.4 mm height above the PCB surface is also relevant when positioning adjacent components.

Because the connector has fifteen poles, designers should provide suitable support during PCB assembly and soldering to maintain correct pin alignment. The PCB should incorporate appropriate conductor widths, copper thicknesses and electrical clearances for the intended application.

Important termination distinction: The WAGO 231-545/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology, depending on the selected mating component.

Before selecting a mating connector, verify the 15-pole configuration, 5.08 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5 mm pitch should not automatically be considered interchangeable with this 5.08 mm pitch header.

Important safety information: The WAGO MCS connection system includes connectors without breaking capacity in accordance with DIN EN 61984. These connectors must not be connected or disconnected while live or under load. The circuit must be safely isolated before mating or unmating, and the equipment design must prevent accessible male header contacts from remaining energised when unmated.

Typical Applications

  • Industrial automation and electronic control boards.
  • PLC interface modules and multi-channel control electronics.
  • Machine building and OEM electrical equipment.
  • 15-pole wire-to-board electrical connections.
  • Industrial lighting controllers and electronic assemblies.
  • PCB assemblies requiring horizontal cable entry.
  • Modular electronic equipment and replaceable circuit boards.
  • Motor control and monitoring electronics.
  • Industrial power and control modules.
  • Control cabinet electronic interfaces.
  • Multi-circuit wiring interfaces requiring a 5.08 mm pitch connector.
  • Equipment requiring a 15-pole angled male PCB header.

Technical Specifications

Tick the specs you need, then view products that match.

Current 12 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 12 A
Material insulation body Thermoplastic
Housing colour Orange
Modular spacing contacts 5.08 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 5.08 mm
Number of poles 15
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 320 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 231-545/001-000
EAN / GTIN 4044918867399
Series 231 / MCS MIDI Classic
Product type THT male PCB header
Connector configuration Angled
Connector gender Male
Number of contacts 15
Number of potentials 15
Number of levels 1
Number of contact rows 1
Contact pitch 5.08 mm
Rated current (IEC) 12 A
Rated voltage (IEC, III/3) 320 V
Rated impulse voltage (IEC, III/3) 4 kV
Rated voltage (IEC, III/2) 320 V
Rated impulse voltage (IEC, III/2) 4 kV
Rated voltage (IEC, II/2) 630 V
Rated impulse voltage (IEC, II/2) 4 kV
Rated voltage (UL 1059, Use Group B) 300 V
Rated current (UL 1059, Use Group B) 10 A
Rated voltage (UL 1059, Use Group D) 300 V
Rated current (UL 1059, Use Group D) 10 A
Rated voltage (UL 1977, factory wiring) 600 V
Rated current (UL 1977, factory wiring) 10 A
PCB mounting technology Through-hole technology (THT)
Termination method Solder
Header orientation Angled
Mating direction relative to PCB 0° / horizontal
Solder pin cross-section 1.0 × 1.0 mm
Solder pin length 3.8 mm
Recommended drilled hole diameter 1.4 mm, tolerance -0/+0.1 mm
Contact material Electrolytic copper
Contact plating Tin
Insulating material Polyamide 66 (PA66)
Housing configuration Four-sided shrouded
Connector coding Coding fingers
Flammability classification UL 94 V-0
Operating temperature range -60 to +100 °C
Overall width 79.32 mm
Overall height 12.2 mm
Overall depth 12 mm
Height above PCB surface 8.4 mm
Contact-centre span 71.12 mm
Approximate weight 4.7 g
Packaging type Box
Country of origin Poland
RoHS compliance Compliant
Relevant standards IEC/EN 61984, UL 1059 and UL 1977

Frequently Asked Questions

What is the WAGO 231-545/001-000?

The WAGO 231-545/001-000 is a 15-pole angled male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring a 5.08 mm contact pitch, 1.0 × 1.0 mm solder pins and an orange insulating housing.

How many poles does the WAGO 231-545/001-000 have?

The connector has 15 poles, providing fifteen male electrical contacts arranged in a single row at a 5.08 mm pitch.

Is the WAGO 231-545/001-000 a straight or angled connector?

The WAGO 231-545/001-000 is an angled male PCB header designed for horizontal mating relative to the printed circuit board.

What is the rated current of the WAGO 231-545/001-000?

The connector has a 12 A IEC rated current. Under the specified UL 1059 and UL 1977 approval conditions, the rated current is 10 A. The permissible current of the complete assembly also depends on the mating connector, PCB design and operating conditions.

What voltage rating does the WAGO 231-545/001-000 support?

The connector is rated at 320 V under IEC category III/3 and III/2 conditions, and 630 V under IEC category II/2 conditions. UL 1059 specifies 300 V, while UL 1977 specifies 600 V for factory wiring.

What is the contact pitch of the WAGO 231-545/001-000?

The WAGO 231-545/001-000 has a 5.08 mm contact pitch, equivalent to 0.2 inch. This differs from 5 mm pitch connector variants.

How is the WAGO 231-545/001-000 mounted?

The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.

Does the WAGO 231-545/001-000 use CAGE CLAMP® termination?

No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination.

What are the dimensions of the WAGO 231-545/001-000?

The connector measures 79.32 mm wide, 12.2 mm high and 12 mm deep, with a height of 8.4 mm above the PCB surface. The distance between the first and last contact centres is 71.12 mm.

Can the WAGO 231-545/001-000 be connected or disconnected while powered?

No. The connector must not be mated or unmated while live or under load. The circuit must be safely isolated before connection or disconnection, and accessible male header contacts must not remain energised when unmated.

Designed for Professional Industrial PCB Connection Systems

The WAGO 231-545/001-000 combines dependable through-hole solder termination, a practical angled mating interface and fifteen organised contact positions, helping engineers and equipment manufacturers create modular, service-friendly industrial electronic assemblies.

Manufacturer reference: WAGO 231-545/001-000 product information. Consult the latest manufacturer datasheet for final electrical ratings, PCB footprint dimensions and mating connector compatibility.