Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.89
The WAGO 231-541/001-000 is an 11-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electronic equipment, this connector provides a reliable, detachable electrical interface between printed circuit boards and compatible female cable connectors.
Featuring a 5.08 mm contact pitch, 1 × 1 mm square solder pins and a right-angle mating arrangement, the WAGO 231-541/001-000 supports horizontal connector access and efficient cable routing. Its orange insulating housing and tin-plated contacts make it suitable for industrial automation, electrical control systems and OEM electronic assemblies.
With an IEC rated current of 12 A and a rated voltage of 320 V under overvoltage category III, pollution degree 2 conditions, this 11-position PCB header is designed for appropriately rated power and control circuits. The connector also supports a rated voltage of up to 630 V under IEC category II/2 conditions.
The WAGO MCS MIDI Classic 231 Series provides modular pluggable connection solutions for industrial electronics, automation systems and printed circuit board assemblies. The system includes male PCB headers and compatible female connectors, allowing electrical wiring to be connected and disconnected without disturbing permanent PCB solder connections.
The WAGO 231-541/001-000 combines eleven electrical contact positions with a 5.08 mm pitch and an angled through-hole mounting configuration. Its horizontal mating arrangement is particularly useful in compact equipment enclosures, industrial controllers and electronic assemblies where cables must be routed parallel to the PCB.
The connector's 1 × 1 mm square solder pins provide a defined through-hole connection interface. Its orange insulating housing supports easy component identification, while tin-plated contact surfaces provide the electrical mating interface for compatible female connectors.
WAGO identifies the 231-541/001-000 as a mating counterpart for compatible 11-pole MCS MIDI Classic female connectors, including the 231-311/026-000 and 231-2311/026-000. The correct mating component must be selected according to the required conductor connection technology, coding arrangement and installation requirements.
Unlike female cable connectors incorporating WAGO's CAGE CLAMP® spring pressure connection technology, this male PCB header does not directly terminate external conductors. It connects to the printed circuit board through soldered pins, while the compatible female connector provides the external wiring interface.
Important safety information: WAGO MCS connectors are not intended for load-breaking operation. The electrical supply must be isolated before mating or unmating the connector, and the equipment design must ensure that accessible male contacts cannot remain live when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 11 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-541/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of electrical contact positions | 11 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° / horizontal | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder pin cross-section | 1 × 1 mm | |
| Solder pin length | 3.8 mm | |
| IEC rated current | 12 A | |
| IEC rated voltage (III/2) | 320 V | |
| IEC rated voltage (II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Contact surface plating | Tin | |
| Housing material | Thermoplastic insulating material | |
| Flammability classification | UL 94 V-0 | |
| Temperature range | −60 to +100 °C | |
| Overall width | Approximately 58.8 mm | |
| Overall height | Approximately 12.2 mm | |
| Overall depth | Approximately 12 mm | |
| Contact arrangement | Single-row male contacts | |
| Mounting arrangement | Horizontal PCB through-hole mounting | |
| Standard packaging unit | 100 pieces | |
| RoHS compliance | Compliant | |
| GTIN / EAN | 4044918867252 | |
| Product family standard | IEC/EN 60664-1 electrical insulation ratings |
The WAGO 231-541/001-000 is an 11-pole angled male PCB header used to create detachable electrical connections between printed circuit boards and compatible WAGO MCS MIDI Classic female connectors.
The connector has 11 poles, providing eleven independent electrical contact positions arranged in a single row.
The connector has a 5.08 mm contact pitch, equivalent to 0.2 inches. The mating connector must have compatible contact spacing and geometry.
It is an angled, right-angle PCB header designed for horizontal mating access, allowing the connected cable assembly to extend parallel to the PCB surface.
The header uses through-hole technology (THT). Its solder pins are inserted into suitable PCB holes and soldered to establish permanent electrical and mechanical connections.
The connector has an IEC rated current of 12 A. The permissible current in a complete installation depends on the mating connector, conductor size, ambient temperature and applicable derating requirements.
The connector is rated at 320 V under IEC overvoltage category III, pollution degree 2 conditions, and up to 630 V under category II, pollution degree 2 conditions.
The WAGO 231-541/001-000 uses 1 × 1 mm square solder pins with a length of 3.8 mm.
The connector is approximately 58.8 mm wide, 12.2 mm high and 12 mm deep. The official WAGO dimensional drawing should be consulted when preparing a production PCB footprint.
The connector has an orange insulating housing and tin-plated electrical contacts.
The specified temperature range is −60 to +100 °C. Actual operating conditions must also account for the mating connector, PCB design, electrical loading and installation environment.
No. This product is a male PCB header with solder pins. External conductors are connected through a separately selected compatible female connector.
WAGO lists compatible 11-pole MCS MIDI Classic female connectors including 231-311/026-000 and 231-2311/026-000. Confirm the required connection technology and mating configuration before selection.
Both are 11-pole THT male PCB headers with 5.08 mm pitch. The 231-541/001-000 is angled for horizontal mating, while the 231-341/001-000 is straight for perpendicular mating relative to the PCB.
Both are 11-pole angled male PCB headers with a 5.08 mm pitch. The 231-541/001-000 uses 1 × 1 mm solder pins, while the 231-571/001-000 uses 1.2 × 1.2 mm solder pins. Their PCB footprints should be checked before substitution.
No. WAGO MCS connectors are not designed for load-breaking operation. Isolate the electrical supply before connecting or disconnecting the mating connector.
The GTIN is 4044918867252, which identifies the exact manufacturer product for ordering and stock management.
WAGO MCS MIDI Classic PCB headers are widely specified by electronic engineers, control panel builders and industrial automation equipment manufacturers. The WAGO 231-541/001-000 combines eleven electrical contacts, angled through-hole solder termination and a 5.08 mm pitch to provide a practical, detachable connection interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.