Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.71
The WAGO 231-540/001-000 is a 10-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for horizontal printed circuit board mounting, it provides a dependable pluggable connection interface between industrial electronic assemblies and compatible female cable connectors.
Featuring a 5.08 mm contact pitch, 1 × 1 mm square solder pins and an angled mating arrangement, this male header supports space-efficient PCB layouts and convenient cable routing. Its orange polyamide housing, tin-plated electrolytic copper contacts and closed-end construction make it suitable for industrial automation, control electronics and OEM equipment.
The WAGO 231-540/001-000 offers a 12 A IEC rated current and rated voltages of 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. Its conventional through-hole solder connection provides mechanical stability, while the pluggable mating interface supports efficient installation and maintenance.
The WAGO MCS MIDI Classic Series provides modular connection technology for industrial electronic equipment, automation systems and printed circuit board assemblies. The system includes male PCB headers and compatible female connectors that allow wiring to be connected and disconnected without disturbing the permanent soldered interface.
The WAGO 231-540/001-000 combines ten contact positions with a 5.08 mm pitch and an angled through-hole arrangement. Its mating direction is parallel to the PCB surface, making it particularly suitable for compact equipment enclosures, control modules and applications requiring cables to run alongside the circuit board.
Measuring 53.92 mm wide, 12.2 mm high and 12 mm deep, the connector provides a compact interface for ten separate electrical circuits. The 1 × 1 mm square solder pins are designed for conventional through-hole soldering and use a specified PCB drilled hole diameter of 1.4 mm with a +0.1 mm tolerance.
The orange PA66 insulating housing has a UL 94 V-0 flammability classification, while the tin-plated electrolytic copper contacts provide the mating interface. Variable coding capability and anti-rotation protection support the design of suitable modular connection assemblies.
As a male PCB header, the 231-540/001-000 does not itself provide conductor clamping terminals. External wiring is connected through a separately selected compatible female connector, which may incorporate WAGO spring pressure connection technology.
Installation and safety: WAGO MCS pluggable connectors are not intended for load-breaking operation. Disconnect the electrical supply before mating or unmating the connector, and ensure accessible male contacts cannot remain live when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-540/001-000 | |
| Series | MCS MIDI Classic 231 | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 10 | |
| Number of levels | 1 | |
| Contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| Connector orientation | Angled | |
| Mating direction relative to PCB | 0° | |
| PCB mounting | Horizontal | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 3.8 mm | |
| Drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Solder pins per potential | 1 | |
| Solder pin arrangement | In-line across the male connector | |
| IEC rated current | 12 A | |
| IEC rated voltage (II/2) | 630 V | |
| IEC rated voltage (III/2) | 320 V | |
| IEC rated voltage (III/3) | 320 V | |
| IEC rated impulse voltage | 4 kV | |
| UL 1059 rated current, Use Groups B and D | 10 A | |
| UL 1059 rated voltage, Use Groups B and D | 300 V | |
| UL 1977 rated current | 10 A | |
| UL 1977 rated voltage | 600 V | |
| CSA rated current, Use Groups B and D | 10 A | |
| CSA rated voltage, Use Groups B and D | 300 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 53.92 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Height above PCB surface | 8.4 mm | |
| Weight | Approximately 3.2 g | |
| Fire load | 0.059 MJ | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Mismating protection | No | |
| Integrated locking | None | |
| Standard packaging unit | 100 pieces | |
| RoHS compliance | Compliant | |
| GTIN | 4044918867184 | |
| Applicable electrical standards | IEC/EN 60664-1, UL 1059, UL 1977 and CSA requirements |
The WAGO 231-540/001-000 is a 10-pole angled male PCB header used to provide detachable electrical connections between a printed circuit board and a compatible WAGO MCS MIDI Classic female connector.
It has 10 poles, providing ten independent electrical contact positions in a single row.
The connector has a 5.08 mm contact pitch, equivalent to 0.2 inches. Mating connectors must have compatible contact spacing and geometry.
It is an angled male PCB header with a 0° mating direction relative to the PCB, enabling horizontal connection access.
The header uses through-hole technology (THT). Its solder pins are inserted into the PCB and soldered to create permanent electrical and mechanical connections.
The manufacturer specifies an IEC rated current of 12 A. Rated voltage is 630 V for overvoltage category II, pollution degree 2, or 320 V for the specified category III conditions. The rated impulse voltage is 4 kV.
Under UL 1059, the connector is rated at 300 V and 10 A for Use Groups B and D. Under UL 1977, the published ratings are 600 V and 10 A.
The WAGO 231-540/001-000 uses 1 × 1 mm square solder pins with a length of 3.8 mm.
The manufacturer's datasheet specifies a 1.4 mm drilled hole diameter with a +0.1 mm tolerance. The complete PCB footprint should be checked against the official dimensional drawing before production.
The connector measures 53.92 mm wide, 12.2 mm high and 12 mm deep. Its height above the PCB surface is 8.4 mm.
The connector has an orange polyamide 66 housing and tin-plated electrolytic copper contacts.
The specified temperature limit range is −60 to +100 °C. The permitted operating conditions of the complete assembly also depend on the mating connector, electrical loading and installation environment.
No. WAGO identifies this variant as having no integrated locking mechanism. The connector does, however, support variable coding and incorporates anti-rotation protection.
No. This is a male PCB header with solder pins. Conductors are terminated in a separately selected compatible female cable connector.
Use an appropriately matched 10-pole WAGO MCS MIDI Classic female connector with 5.08 mm pitch and compatible mating geometry. Confirm the exact counterpart and any coding requirements using WAGO's mating connector documentation.
No. WAGO MCS connectors are not designed for load-breaking operation. Isolate the electrical supply before connecting or disconnecting the mating connector.
The GTIN is 4044918867184, which can be used to identify the exact manufacturer product when ordering or checking stock records.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel builders and industrial automation equipment manufacturers. The WAGO 231-540/001-000 combines ten male contacts, angled through-hole solder termination and a 5.08 mm pitch to provide a dependable, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.