Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.38
The WAGO 231-538/001-000 is a reliable 8-pole angled through-hole technology (THT) male PCB header designed for detachable electrical connections in industrial electronics, control systems and automation equipment. As part of the WAGO 231 Series MCS MIDI Classic pluggable connection system, this connector provides a practical interface between printed circuit boards and compatible pluggable terminal connectors.
Featuring a 5.08 mm contact pitch and 1 × 1 mm angled solder pins, the header provides stable PCB mounting and dependable electrical connectivity. Its orange polyamide housing incorporates coding fingers, while tin-plated electrolytic copper contacts provide reliable electrical conductivity. The right-angle configuration supports horizontal PCB connections where space-efficient cable routing and accessible mating interfaces are required.
With 8 poles, an IEC rated current of 12 A and rated voltages of up to 630 V under specified IEC insulation conditions, the WAGO 231-538/001-000 is suitable for industrial PCB interconnections. Its compact single-row construction and angled mounting arrangement make it useful for control boards, electronic modules and equipment requiring serviceable plug-in connections.
Pluggable PCB connectors such as the WAGO 231-538/001-000 provide an effective method of connecting electrical wiring to electronic control boards. By combining permanent soldered PCB connections with a detachable mating interface, these components simplify equipment assembly, servicing and replacement of electronic modules without requiring individual wires to be desoldered.
The WAGO 231 Series MCS MIDI Classic is designed for industrial electrical interconnection applications where dependable contact performance and efficient installation are important. The 231-538/001-000 combines an 8-pole configuration, 5.08 mm pitch and angled THT mounting to support integration into control electronics, industrial interface boards and automation equipment. In accordance with the safety requirements for connectors without breaking capacity, the connection must not be mated or disconnected while live or under load, and accessible header pins must not remain live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 / MCS MIDI Classic | |
| Model | 231-538/001-000 | |
| Product type | Angled THT male PCB header | |
| Connector configuration | Right-angle male header | |
| Number of rows | 1 | |
| Number of potentials | 8 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977, factory wiring) | 600 V | |
| Rated current (UL 1977, factory wiring) | 10 A | |
| PCB connection technology | Through-hole soldering (THT) | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 3.8 mm | |
| Solder pins per potential | 1 | |
| Recommended drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature range | -60 to +100 °C | |
| Mounting type | Angled PCB through-hole mounting | |
| Width | 43.76 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Weight | Approximately 2.7 g | |
| Applicable standards | IEC/EN 60664-1, IEC/EN 61984, UL 1059, UL 1977 | |
| Flammability standard | UL94 | |
| Compliance | RoHS | |
| GTIN | 4044918867078 |
The WAGO 231-538/001-000 is an 8-pole angled male PCB header used to create detachable electrical connections between printed circuit boards and compatible pluggable terminal connectors in industrial electronics and automation equipment.
This connector has 8 poles arranged in a single row with a 5.08 mm contact pitch, providing eight separate electrical connection positions.
The header has an IEC rated current of 12 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for category II, pollution degree 2. UL 1059 ratings include 300 V and 10 A for specified use groups, while UL 1977 specifies 600 V and 10 A for factory wiring applications.
The connector uses through-hole technology (THT) with angled 1 × 1 mm solder pins that are soldered into a printed circuit board. Its right-angle design supports horizontal PCB connections.
No. The WAGO MCS MIDI Classic connection system includes connectors without breaking capacity under IEC/EN 61984. The connector must not be connected or disconnected while live or under load, and the circuit must be designed so accessible header pins are not live when unmated.
WAGO 231 Series MCS MIDI Classic pluggable PCB connection components provide dependable electrical interconnections for industrial control systems, electronic equipment and OEM machinery. The WAGO 231-538/001-000 combines a practical 8-pole design, angled through-hole solder mounting and reliable contact technology for industrial PCB connectivity.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.