231-535/001-000 Wago Male Connector, With Angled Solder Pins 5-Pole Orange

231-535/001-000 Wago Male Connector, With Angled Solder Pins 5-Pole Orange

SKU: 231-535/001-000MPN: 231-535/001-000
Price
List Price £0.98 ex VAT
Your Price (ex VAT) Save 15%
£0.833 15% OFF
You save £0.147 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £0.83
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 200

£0.833

Why Choose the WAGO 231-535/001-000 5-Pole Angled Male PCB Header?

The WAGO 231-535/001-000 is a high-quality 5-pole angled male PCB header designed for dependable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5.08 mm contact pitch, 1.0 × 1.0 mm square solder pins and a distinctive orange insulating housing.

Designed for through-hole technology (THT), the WAGO 231-535/001-000 provides a permanent soldered connection to the printed circuit board while offering a detachable mating interface for compatible pluggable connectors. Its angled solder pin configuration supports horizontal mating relative to the PCB, making it particularly useful in equipment requiring side-entry wiring and efficient cable routing.

With a 12 A rated current, a 320 V IEC voltage rating under overvoltage category III, pollution degree 2 conditions and a four-sided shrouded contact interface, this WAGO connector provides a practical solution for industrial control systems, machinery electronics and modular wire-to-board connections.

Key Advantages

  • 5-pole male PCB header: Provides five individual electrical connection positions in one compact connector.
  • Angled configuration: Enables horizontal mating and convenient side-entry cable routing.
  • 5.08 mm contact pitch: Uses standard 0.2-inch spacing for compatible pluggable connector systems.
  • 12 A current rating: Suitable for appropriately designed industrial control and power connections.
  • Through-hole solder termination: Creates permanent electrical and mechanical connections to the PCB.
  • 1.0 × 1.0 mm square solder pins: Provide a defined and mechanically stable PCB termination interface.
  • Four-sided shrouded housing: Helps guide mating connectors and protect the male contact interface.
  • Tin-plated copper contacts: Provide dependable electrical conductivity.
  • Integrated coding fingers: Support connector identification and appropriate mating configurations.
  • Orange housing: Makes the connector easy to distinguish during assembly and maintenance.
  • Pluggable connection system: Supports modular construction and efficient equipment servicing.
  • Durable insulating material: Polyamide housing provides electrical insulation and mechanical protection.

Key Features

  • WAGO MCS MIDI Classic 231 Series.
  • 5-pole male PCB header.
  • Single-row contact arrangement.
  • 5.08 mm contact pitch (0.2 inch).
  • Angled solder pin construction.
  • Horizontal mating direction relative to the PCB.
  • 12 A rated current under specified IEC conditions.
  • 320 V IEC rated voltage under category III/2 conditions.
  • 4 kV rated impulse voltage under applicable IEC conditions.
  • Through-hole PCB mounting.
  • 1.0 × 1.0 mm square solder pins.
  • Four-sided shrouded male contact interface.
  • Tin-plated electrolytic copper contacts.
  • Orange polyamide 66 insulating housing.
  • UL 94 V-0 flammability classification.
  • Operating temperature range from -60 to +100 °C.
  • Integrated coding fingers.
  • No integrated connector locking mechanism.

Electrical rating note: Published product listings may present different IEC and UL ratings depending on the applicable classification and test conditions. The 12 A and 320 V values are commonly specified for this connector configuration. Other listings identify ratings of up to 630 V IEC and 600 V UL under their respective conditions. Always verify the applicable ratings using the latest WAGO documentation before finalising an electrical design.

Reliable Angled Through-Hole PCB Connection Technology

The WAGO 231-535/001-000 provides a dependable electrical interface between a printed circuit board and a compatible pluggable connector. Its five angled solder pins are inserted into suitable PCB holes and soldered into position, creating permanent electrical and mechanical connections.

The connector uses 1.0 × 1.0 mm square solder pins designed for through-hole mounting. These pins provide a stable interface with the PCB and allow the connector to be integrated into conventional electronic assembly processes.

The 5.08 mm contact pitch provides five electrical connection positions at regular intervals. The distance between the first and last contact centres is 20.32 mm, allowing the connector to accommodate multiple circuits within a compact footprint.

Its angled construction enables a compatible mating connector to approach horizontally relative to the PCB. This can simplify wiring layouts, reduce vertical space requirements and improve accessibility in electronic equipment where cables are routed towards the board edge.

The four-sided shrouded housing helps guide the mating connector and provides a defined contact interface. Integrated coding fingers support connector configuration and can help distinguish connection points when suitable coding arrangements are used.

The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the orange PA66 housing offers mechanical protection and electrical insulation. Its UL 94 V-0 flammability classification supports integration into professionally designed industrial electronic equipment.

PCB Footprint, Soldering and Connector Compatibility

The WAGO 231-535/001-000 uses through-hole technology (THT) with 1.0 × 1.0 mm square solder pins. The pins must be installed in a correctly designed PCB footprint and soldered using a suitable manufacturing process.

The connector measures approximately 28.52 mm wide, 12.2 mm high and 12 mm deep. These dimensions should be considered when planning component placement, enclosure clearances and the position of the mating connector.

The angled mating arrangement requires sufficient clearance for the mating connector housing, attached conductors and cable bend radius. The PCB should also be designed with appropriate electrical clearances and copper track dimensions for the intended current and voltage.

Important termination distinction: The WAGO 231-535/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible pluggable cable connectors may incorporate WAGO CAGE CLAMP® spring pressure technology, depending on the selected mating component.

Before selecting a mating connector, verify the 5-pole configuration, 5.08 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5 mm pitch should not automatically be considered interchangeable with this 5.08 mm pitch header.

Important safety information: The WAGO MCS system includes connectors without breaking capacity in accordance with DIN EN 61984. These connectors must not be connected or disconnected while live or under load. The circuit must be safely isolated before mating or unmating, and accessible male header pins must not remain energised when unmated.

Typical Applications

  • Industrial automation and electronic control boards.
  • PLC interface modules and control electronics.
  • Machine building and OEM electrical equipment.
  • Angled wire-to-board electrical connections.
  • Industrial lighting control equipment.
  • Compact PCB assemblies requiring horizontal cable entry.
  • Modular electronic equipment and replaceable circuit boards.
  • Motor control and monitoring electronics.
  • Industrial power and control modules.
  • Control cabinet electronic interfaces.
  • Equipment requiring a 5-pole, 5.08 mm pitch male PCB header.

Technical Specifications

Tick the specs you need, then view products that match.

Current 12 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 12 A
Material insulation body Thermoplastic
Housing colour Orange
Modular spacing contacts 5.08 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 5.08 mm
Number of poles 5
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 320 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 231-535/001-000
EAN / GTIN 4044918866934
Series 231 / MCS MIDI Classic
Product type THT male PCB header
Connector configuration Angled
Connector gender Male
Number of contacts 5
Number of contact rows 1
Number of levels 1
Contact pitch 5.08 mm
Rated current 12 A under specified IEC conditions
Rated voltage (IEC, III/2) 320 V
Rated impulse voltage (IEC, III/2) 4 kV
Additional IEC voltage rating (II/2) 630 V
PCB mounting technology Through-hole technology (THT)
Termination method Solder
Header orientation Angled
Mating direction relative to PCB Horizontal
Solder pin cross-section 1.0 × 1.0 mm
Contact material Electrolytic copper
Contact plating Tin
Insulating material Polyamide 66 (PA66)
Housing configuration Four-sided shrouded
Connector coding Integrated coding fingers
Connector locking None
Flammability classification UL 94 V-0
Operating temperature range -60 to +100 °C
Overall width 28.52 mm
Overall height 12.2 mm
Overall depth 12 mm
Insulation height 8.4 mm
Contact-centre span 20.32 mm
Approximate weight 1.69 g
Manufacturer packaging unit 200 pieces
RoHS compliance Compliant

Frequently Asked Questions

What is the WAGO 231-535/001-000?

The WAGO 231-535/001-000 is a 5-pole angled male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring a 5.08 mm contact pitch, 1.0 × 1.0 mm solder pins and an orange insulating housing.

How many poles does the WAGO 231-535/001-000 have?

The connector has 5 poles, providing five male electrical contacts arranged in a single row at a 5.08 mm pitch.

Is the WAGO 231-535/001-000 a straight or angled connector?

The WAGO 231-535/001-000 is an angled male PCB header designed for horizontal mating relative to the printed circuit board.

What is the rated current of the WAGO 231-535/001-000?

The connector has a commonly specified current rating of 12 A under applicable IEC conditions. The permissible current of the complete connection depends on the mating connector, PCB design, operating temperature and relevant approval conditions.

What voltage rating does the WAGO 231-535/001-000 support?

The connector has a 320 V IEC rating under overvoltage category III, pollution degree 2 conditions. A 630 V IEC rating is also specified under category II, pollution degree 2 conditions. The permitted operating voltage depends on the complete installation.

What is the contact pitch of the WAGO 231-535/001-000?

The WAGO 231-535/001-000 has a 5.08 mm contact pitch, equivalent to 0.2 inch. This differs from 5 mm pitch connector variants.

How is the WAGO 231-535/001-000 mounted?

The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.

Does the WAGO 231-535/001-000 use CAGE CLAMP® termination?

No. The male PCB header uses solder termination. Compatible pluggable cable connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination.

What are the dimensions of the WAGO 231-535/001-000?

The connector measures approximately 28.52 mm wide, 12.2 mm high and 12 mm deep. The distance between the first and last contact centres is 20.32 mm.

Can the WAGO 231-535/001-000 be connected or disconnected while powered?

No. The connector must not be mated or unmated while live or under load. The circuit must be safely isolated before connection or disconnection, and accessible male header contacts must not remain energised when unmated.

Designed for Professional Industrial PCB Connection Systems

The WAGO 231-535/001-000 combines reliable through-hole solder termination, a practical angled mating interface and durable insulating materials, helping engineers, machine builders and automation specialists create organised, modular and maintenance-friendly industrial electronic assemblies.

Manufacturer reference: WAGO 231-535/001-000 product information. Consult the latest manufacturer datasheet for final electrical ratings, PCB footprint dimensions and mating connector compatibility.