231-534/001-000 Wago Male Connector, With Angled Solder Pins 4-Pole Orange

231-534/001-000 Wago Male Connector, With Angled Solder Pins 4-Pole Orange

SKU: 231-534/001-000MPN: 231-534/001-000
Price
List Price £0.81 ex VAT
Your Price (ex VAT) Save 15%
£0.6885 15% OFF
You save £0.1215 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £0.69
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 200

£0.6885

Why Choose the WAGO 231-534/001-000 4-Pole Angled Male PCB Header?

The WAGO 231-534/001-000 is a high-quality 4-pole angled male PCB header designed for reliable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5.08 mm contact pitch, 1.0 × 1.0 mm square solder pins and a distinctive orange insulating housing.

Designed for through-hole PCB mounting (THT), the WAGO 231-534/001-000 provides a permanent soldered connection to the printed circuit board while allowing a compatible female connector to be plugged into its male contact interface. Its angled solder pin configuration enables horizontal mating relative to the PCB, making it particularly suitable for electronic equipment where cables need to approach from the side.

With a 12 A nominal current rating under specified IEC conditions, a 320 V IEC rated voltage under overvoltage category III, pollution degree 2 conditions and a four-sided shrouded housing, this WAGO PCB header provides a practical solution for modular industrial electronics, machinery control systems and wire-to-board connections.

Key Advantages

  • 4-pole male PCB header: Provides four individual electrical connection positions.
  • Right-angle connection: Supports horizontal mating and convenient cable routing alongside the PCB.
  • 5.08 mm contact pitch: Provides standard 0.2-inch contact spacing for compatible pluggable connector systems.
  • Through-hole solder termination: Creates permanent electrical and mechanical connections to the printed circuit board.
  • 1.0 × 1.0 mm square solder pins: Provide a defined, robust interface for PCB mounting.
  • Four-sided shrouded housing: Helps guide the mating connector and protect the male contacts.
  • Tin-plated copper contacts: Offer dependable electrical conductivity.
  • Integrated coding fingers: Support connector identification and mating configuration.
  • Orange housing: Makes the connector visually distinguishable within an electronic assembly.
  • Pluggable design: Supports modular equipment construction, maintenance and servicing.
  • Durable insulation: Polyamide 66 housing provides electrical insulation and mechanical protection.
  • Wide operating temperature range: Suitable for specified applications from -60 to +100 °C.

Key Features

  • WAGO MCS MIDI Classic 231 Series pluggable PCB connection system.
  • 4-pole male PCB header with four contact positions.
  • 5.08 mm contact spacing (0.2 inch).
  • Angled / right-angle solder pin configuration.
  • Horizontal mating arrangement relative to the printed circuit board.
  • 12 A nominal current under specified IEC conditions.
  • 320 V rated voltage under IEC category III/2 conditions.
  • 4 kV rated impulse voltage under the specified IEC conditions.
  • Through-hole technology (THT) for PCB mounting.
  • 1.0 × 1.0 mm square solder pins.
  • 3.8 mm solder pin projection.
  • Four-sided shrouded male contact interface.
  • Electrolytic copper contacts with tin plating.
  • Orange polyamide 66 insulating housing.
  • UL 94 V-0 flammability classification.
  • -60 to +100 °C operating temperature range.

Electrical rating note: Published distributor specifications differ in how IEC ratings are presented. The 12 A, 320 V and 4 kV figures above relate to specified IEC operating conditions, while other listings give 16 A and 630 V as broader connector ratings. Always use the latest WAGO technical documentation and the applicable overvoltage category, pollution degree, mating connector and PCB design when determining permissible operating limits.

Reliable Angled Through-Hole PCB Connection Technology

The WAGO 231-534/001-000 provides a dependable electrical interface between a printed circuit board and a compatible pluggable female connector. Its four angled solder pins are inserted into appropriately prepared PCB holes and soldered into position, establishing permanent electrical and mechanical connections.

The 1.0 × 1.0 mm square solder pins are designed to provide a stable mechanical interface with the PCB. The connector's 5.08 mm pitch allows four electrical contact positions to be arranged at regular intervals, giving a total contact-centre span of 15.24 mm.

Its right-angle construction allows a compatible female connector to approach horizontally rather than perpendicular to the circuit board. This arrangement can simplify enclosure design, improve cable routing and reduce the vertical space required for the mating connection.

The four-sided shrouded housing helps guide compatible mating connectors into position and provides a defined contact interface. Integrated coding fingers support connector configuration, helping equipment manufacturers distinguish between connection points where appropriate coding arrangements are used.

The tin-plated electrolytic copper contacts provide dependable electrical conductivity. The orange PA66 insulating housing offers mechanical protection and electrical insulation, while its UL 94 V-0 flammability classification supports use in professionally designed industrial electronic equipment.

With an operating temperature range of -60 to +100 °C, the connector can be incorporated into industrial electrical assemblies designed to operate within the manufacturer's specified limits.

PCB Footprint, Soldering and Connector Compatibility

The WAGO 231-534/001-000 uses through-hole technology (THT) with 1.0 × 1.0 mm square solder pins. The pins must be installed in a correctly designed PCB footprint and soldered using a suitable manufacturing process.

Its 18.44 mm overall width, 12.2 mm height and 12 mm depth should be considered when allocating space on the PCB and designing the surrounding enclosure. The right-angle mating arrangement also requires suitable clearance for the female connector, conductor entry and cable bend radius.

Important termination distinction: The WAGO 231-534/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors may incorporate WAGO CAGE CLAMP® spring pressure technology, depending on the selected mating component.

Before choosing a mating connector, verify the 4-pole configuration, 5.08 mm pitch, mating geometry, coding arrangement and electrical ratings. A 5 mm pitch connector should not automatically be considered interchangeable with this 5.08 mm pitch header.

Important safety information: The WAGO MCS connection system includes connectors without breaking capacity in accordance with DIN EN 61984. These connectors must not be connected or disconnected while live or under load. The equipment design should ensure that accessible male header contacts are not energised when unmated.

Typical Applications

  • Industrial automation and electronic control boards.
  • PLC interface modules and control electronics.
  • Machine building and OEM electrical equipment.
  • Right-angle wire-to-board electrical connections.
  • Industrial lighting control equipment.
  • Compact PCB assemblies requiring horizontal cable entry.
  • Modular electronic equipment and replaceable circuit boards.
  • Motor control and monitoring electronics.
  • Industrial power and control modules.
  • Control cabinet electronic interfaces.
  • Equipment requiring a 4-pole, 5.08 mm pitch male PCB header.

Technical Specifications

Tick the specs you need, then view products that match.

Current 12 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 12 A
Material insulation body Thermoplastic
Housing colour Orange
Modular spacing contacts 5.08 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 5.08 mm
Number of poles 4
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 320 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 231-534/001-000
Series 231 / MCS MIDI Classic
Product type THT male PCB header
Connector configuration Angled / right-angle
Connector gender Male
Number of contacts 4
Number of contact rows 1
Number of levels 1
Contact pitch 5.08 mm
Nominal current (IEC, specified conditions) 12 A
Rated voltage (IEC, III/2) 320 V
Rated impulse voltage (IEC, III/2) 4 kV
Distributor-listed current rating (IEC) 16 A
Distributor-listed voltage rating (IEC) 630 V
Distributor-listed current rating (UL) 15 A
Distributor-listed voltage rating (UL) 600 V
PCB mounting technology Through-hole technology (THT)
Termination method Solder
Header orientation Angled / right-angle
Mating direction Horizontal relative to the PCB
Solder pin cross-section 1.0 × 1.0 mm
Solder pin projection 3.8 mm
Contact material Electrolytic copper
Contact plating Tin
Insulating material Polyamide 66 (PA66)
Housing configuration Four-sided shrouded
Connector coding Coding fingers
Flammability classification UL 94 V-0
Operating temperature range -60 to +100 °C
Overall width 18.44 mm
Overall height 12.2 mm
Overall depth 12 mm
Insulation height 8.4 mm
Contact-centre span 15.24 mm between the first and last contact centres
Weight Approximately 1.44 g
Packaging Box
RoHS compliance Compliant

Frequently Asked Questions

What is the WAGO 231-534/001-000?

The WAGO 231-534/001-000 is a 4-pole angled male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5.08 mm contact pitch, 1.0 × 1.0 mm solder pins and an orange insulating housing.

How many poles does the WAGO 231-534/001-000 have?

The connector has 4 poles, providing four male electrical contacts arranged in a single row at a 5.08 mm pitch.

Is the WAGO 231-534/001-000 a straight or angled connector?

The WAGO 231-534/001-000 is an angled, right-angle male PCB header designed for horizontal mating relative to the printed circuit board.

What is the rated current of the WAGO 231-534/001-000?

A nominal current of 12 A is specified under particular IEC conditions, while distributor listings also identify a 16 A IEC connector rating. The applicable current depends on the mating connector, PCB design, operating temperature and relevant rating conditions.

What voltage rating does the WAGO 231-534/001-000 support?

The connector has a 320 V IEC rating under overvoltage category III, pollution degree 2 conditions. Distributor listings also identify a 630 V IEC rating under other applicable conditions. The correct operating voltage must be determined from the manufacturer's rating tables and the complete installation.

What is the contact pitch of the WAGO 231-534/001-000?

The WAGO 231-534/001-000 has a 5.08 mm contact pitch, equivalent to 0.2 inch. This differs from 5 mm pitch connector variants.

How is the WAGO 231-534/001-000 mounted?

The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.

Does the WAGO 231-534/001-000 use CAGE CLAMP termination?

No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP spring pressure technology for conductor termination.

What are the dimensions of the WAGO 231-534/001-000?

The connector measures approximately 18.44 mm wide, 12.2 mm high and 12 mm deep, with an insulation height of 8.4 mm. The distance between the first and last contact centres is 15.24 mm.

Can the WAGO 231-534/001-000 be connected or disconnected while powered?

No. The connector must not be mated or unmated while live or under load. The circuit must be safely isolated before connection or disconnection, and accessible male header contacts must not remain energised when unmated.

Designed for Professional Industrial PCB Connection Systems

WAGO MCS MIDI Classic PCB headers combine dependable through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping engineers, machine builders and automation specialists create organised and maintenance-friendly industrial electronic assemblies.

Manufacturer reference: WAGO 231-534/001-000 product information. Consult the latest WAGO datasheet for application-specific electrical ratings, dimensional drawings and mating connector compatibility.