Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.39
The WAGO 231-533/108-000 is a 3-pole angled male PCB header with a threaded mounting flange, designed for secure pluggable electrical connections in industrial control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic Series 231, this connector combines 5.08 mm contact spacing, 1.0 × 1.0 mm square solder pins and a distinctive orange insulating housing.
Its right-angle configuration allows a compatible female connector to approach parallel to the PCB surface, while the threaded flange provides an additional mechanical retention option when used with a correctly matched locking connector assembly.
With an IEC rated current of 12 A, tin-plated electrolytic copper contacts and a four-sided shrouded mating interface, the WAGO 231-533/108-000 is suitable for industrial electronics requiring a detachable three-circuit connection with enhanced mechanical security.
The WAGO 231-533/108-000 features three electrical contacts at 5.08 mm spacing. The centre-to-centre distance between the first and last electrical contacts is therefore 10.16 mm.
Unlike the standard non-flanged version, the /108-000 variant includes threaded flange extensions. The additional flange geometry must be considered when designing the PCB footprint, selecting the mating connector and allocating enclosure clearance.
WAGO's published dimensional relationships for this threaded-flange configuration are:
For the three-pole, 5.08 mm-pitch connector, these relationships give:
These are the manufacturer's labelled dimensional references, not interchangeable measurements of PCB footprint width or total clearance. Use the official dimensional drawing for exact flange positions, solder-hole locations and mechanical tolerances.
The distinguishing feature of the WAGO 231-533/108-000 is its threaded flange. Compared with a standard male header that relies primarily on the mating connector's friction and contact retention, a threaded-flange design can provide an additional mechanical securing arrangement when paired with compatible mating hardware.
This feature is particularly valuable in equipment where connectors may be exposed to vibration, cable movement or repeated maintenance access. A correctly specified locking arrangement can help prevent unintended separation of the mating connection.
The threaded flange must be used with the correct mating connector and fastening components. Do not assume that any three-pole, 5.08 mm female connector can engage the flange. The female connector must have compatible mechanical geometry and, where required, the appropriate fastening arrangement.
The connector's 90° right-angle orientation allows the mating female connector to approach parallel to the printed circuit board. This can simplify cable routing in shallow electronic enclosures and allow connections to be accessed from the side of a control module.
Its 1.0 × 1.0 mm square solder pins are installed using through-hole PCB mounting. The pins are inserted into appropriately dimensioned drilled holes and soldered to create the electrical connection between the header and the PCB.
The four-sided shrouded housing helps guide the mating connector and provides protection around the male contacts. Tin-plated electrolytic copper contacts support electrical conductivity, while the orange PA66 housing provides insulation between adjacent electrical positions.
The WAGO 231-533/108-000 is a PCB-mounted male header, not a direct wire-entry terminal. External conductors must be terminated in a separately selected compatible female connector.
Electrical safety: WAGO MCS connectors are not intended to be connected or disconnected while live or under load unless specifically approved for that operation. The circuit design must prevent accessible male contacts from remaining hazardous when unmated.
The WAGO 231-533/108-000 and WAGO 231-533/001-000 are both three-pole orange THT male headers from the MCS MIDI Classic Series 231, with 5.08 mm contact spacing and 1.0 × 1.0 mm solder pins.
The main difference is the threaded flange on the 231-533/108-000. This feature provides a mechanical locking interface for appropriately matched female connector assemblies.
The 231-533/001-000 is the standard version without the threaded flange. Although the two connectors share several electrical characteristics, they have different mechanical configurations and should not be treated as direct drop-in replacements without checking the PCB footprint and mating assembly.
For applications requiring additional connector retention, the threaded-flange version may be preferable, provided the mating connector and installation hardware are specifically compatible.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-533/108-000 | |
| Product family | MCS MIDI Classic | |
| Series | 231 | |
| Product type | Angled THT male PCB header with threaded flange | |
| Connector gender | Male | |
| Number of electrical positions | 3 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm / 0.2 in | |
| Header orientation | 90° right-angle | |
| Mating direction | Parallel to the PCB surface | |
| PCB mounting method | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin cross-section | 1.0 × 1.0 mm | |
| Contact tail length | Approximately 3.8 mm | |
| Housing design | Four-sided shrouded | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL) | 10 A | |
| UL voltage rating | Up to 600 V under applicable approval conditions | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Insulation height | Approximately 8.4 mm | |
| Material temperature range | −60 to +100 °C | |
| Anti-rotation protection | Yes | |
| Standard packaging unit | 200 pieces | |
| Country of origin | Poland | |
| GTIN / EAN | Confirm against the current WAGO product documentation |
The WAGO 231-533/108-000 is a 3-pole angled THT male PCB header with a threaded flange. It belongs to the MCS MIDI Classic Series 231 and features 5.08 mm contact spacing and an orange housing.
It has 3 poles, providing three independent electrical connection positions.
The connector has a nominal contact pitch of 5.08 mm, equivalent to 0.2 inches.
Yes. The /108-000 variant includes a threaded flange designed for use with an appropriately matched mechanical locking arrangement.
The threaded flange provides a means of mechanically securing a compatible mating connector. This can improve connector retention in applications where vibration, cable movement or maintenance handling must be considered.
It is an angled, right-angle male PCB header. Its mating interface is oriented parallel to the PCB surface.
The connector uses through-hole technology (THT). Its solder pins are inserted through prepared PCB holes and soldered to the circuit board.
The connector features 1.0 × 1.0 mm square solder pins with an approximately 3.8 mm contact tail projection. Refer to the WAGO dimensional drawing for the exact PCB hole pattern.
The WAGO 231-533/108-000 has an IEC rated current of 12 A. Its UL rated current is 10 A under applicable approval conditions.
The IEC ratings include 320 V under category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the installation environment and the complete connector assembly.
The connector features an orange polyamide 66 insulating housing.
The 231-533/108-000 has a threaded flange for compatible locking arrangements, while the 231-533/001-000 is the standard non-flanged version. Both are three-pole headers with 5.08 mm pitch, but their mechanical configurations differ.
No. The male PCB header itself uses solder-pin termination. A compatible female connector may use WAGO CAGE CLAMP® spring-pressure technology for connecting external conductors.
Select a compatible three-pole female connector with 5.08 mm pitch and the correct threaded-flange locking interface. Confirm the mating connector and fastening components using WAGO documentation.
No. The WAGO MCS connection system is not intended for connection or disconnection while live or under load unless the complete assembly is specifically approved for that operation. Follow appropriate electrical isolation procedures.
The WAGO 231-533/108-000 combines three electrical positions, 5.08 mm contact spacing, 1.0 × 1.0 mm solder pins and a threaded flange in a compact orange right-angle male PCB header. Its mechanically securable mating interface makes it a practical choice for compatible industrial wire-to-board connection systems.
Official manufacturer reference: WAGO 231-533/108-000 Product Information
Technical documentation: WAGO 231-533/108-000 Manufacturer Datasheet (PDF)
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.