Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.3315
The WAGO 231-532/001-000 is a 2-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial printed circuit board connections, this compact connector provides a reliable, detachable electrical interface between electronic assemblies and compatible female cable connectors.
Featuring a 5.08 mm contact pitch, 1 × 1 mm square solder pins and a right-angle orientation, the WAGO 231-532/001-000 supports horizontal connector access and efficient cable routing. Its distinctive orange polyamide 66 housing, four-sided shrouded mating interface and tin-plated electrolytic copper contacts make it suitable for industrial automation, electronic control equipment and OEM applications.
With an IEC rated current of 12 A and a rated voltage of up to 630 V under specified IEC insulation conditions, this two-position male header supports appropriately designed power and control circuits. Its through-hole solder termination provides mechanical stability, while the pluggable design allows connected wiring assemblies to be detached for installation, servicing and equipment replacement.
The WAGO MCS MIDI Classic Series provides modular pluggable connection solutions for industrial electronics, automation systems and printed circuit board assemblies. Its male PCB headers and compatible female connectors enable equipment manufacturers to create detachable electrical interfaces between circuit boards and external wiring.
The WAGO 231-532/001-000 combines two contact positions with a 5.08 mm pitch and an angled through-hole mounting arrangement. Its right-angle design allows a compatible female connector to be inserted parallel to the PCB surface, making it particularly useful in compact electronic enclosures, control modules and applications requiring horizontal cable routing.
The connector measures approximately 13.28 mm wide, 12.2 mm high and 12 mm deep, with an insulation height of 8.4 mm above the PCB surface. Its 1 × 1 mm square solder pins have a 3.8 mm projection and are intended for conventional through-hole soldering.
The orange insulating housing is manufactured from polyamide 66, with a UL 94 V-0 flammability classification. Tin-plated electrolytic copper contacts provide the electrical mating interface, while the four-sided shrouded housing helps guide the compatible female connector into position.
Unlike female cable connectors that may use WAGO's CAGE CLAMP® spring pressure connection technology, this male PCB header connects directly to the circuit board through soldered pins. External conductors are terminated in a separately selected compatible female connector.
Important safety information: WAGO MCS pluggable connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating connector, and equipment design must prevent accessible male contacts from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-532/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Total number of potentials | 2 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5.08 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° / parallel to PCB surface | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 3.8 mm | |
| Drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Number of solder pins per potential | 1 | |
| Solder pin arrangement | In-line across the male connector | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Processing temperature range | −35 to +60 °C | |
| Width | Approximately 13.28 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Insulation height above PCB | 8.4 mm | |
| Weight | Approximately 0.8 g | |
| Fire load | 0.017 MJ | |
| Mounting method | PCB through-hole solder mounting | |
| RoHS compliance | Compliant | |
| Country of origin | Poland | |
| Packaging unit | 200 pcs | |
| Packaging type | Box | |
| GTIN | 4044918866774 | |
| Relevant standards | IEC 61984, EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-532/001-000 is a 2-pole angled male PCB header used to provide detachable electrical connections between a printed circuit board and a compatible WAGO MCS MIDI Classic female connector.
The connector has 2 poles, providing two independent electrical contact positions arranged in a single row.
The header has a 5.08 mm contact pitch, equivalent to 0.2 inches. This differs from the 5 mm pitch used by certain other WAGO 231 Series variants, so mating compatibility must be checked carefully.
It is an angled, right-angle PCB header. Its mating direction is parallel to the PCB surface, making it suitable for side-entry connector arrangements and horizontal cable routing.
The header uses through-hole technology (THT). Its square solder pins are inserted into drilled PCB holes and soldered to provide a permanent electrical and mechanical connection.
The connector has an IEC rated current of 12 A and a rated voltage of up to 630 V under overvoltage category II, pollution degree 2 conditions. Its UL 1059 Use Group B and D ratings are 300 V and 10 A.
The WAGO 231-532/001-000 uses 1 × 1 mm square solder pins with a solder pin length of 3.8 mm.
The manufacturer's specification gives a 1.4 mm drilled hole diameter with a +0.1 mm tolerance. The complete PCB footprint should be checked against WAGO's dimensional drawing before production.
The connector measures approximately 13.28 mm wide, 12.2 mm high and 12 mm deep. Its insulating housing extends approximately 8.4 mm above the PCB surface.
The header has an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts.
The specified temperature limit range is −60 to +100 °C. The processing temperature range is −35 to +60 °C. Actual operating conditions must also account for the mating connector, PCB design, electrical loading and installation environment.
No. This product is a male PCB header with solder pins. It connects directly to the circuit board, while external conductors are terminated in a separately selected compatible female connector.
Both belong to the WAGO MCS MIDI Classic connector family. The 231-532/001-000 has a 5.08 mm pitch, while the 231-432/001-000 is a 5 mm pitch variant. The correct PCB footprint and mating connector must be selected for each part number.
The header is designed for use with appropriately matched 2-pole WAGO MCS MIDI Classic female connectors having the correct 5.08 mm pitch and mating geometry. Compatibility should be confirmed using WAGO's product-specific mating connector documentation.
No. WAGO MCS connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating plug, and accessible header contacts must not remain live when unmated.
The GTIN is 4044918866774, which can be used to identify the exact WAGO product when ordering or checking stock records.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel builders and industrial automation equipment manufacturers. The WAGO 231-532/001-000 combines two reliable male contacts, angled through-hole solder termination and a 5.08 mm pitch to provide a dependable, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.