Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.67
The WAGO 231-474/001-000 is a durable and reliable 14-pole angled male PCB header designed to provide secure, detachable electrical connections in industrial electronics, automation equipment and printed circuit board assemblies. As part of the WAGO MCS MIDI Classic 231 Series, this connector offers dependable electrical performance and convenient integration with compatible pluggable female connectors.
Featuring a 5 mm pin spacing, 90° angled mating orientation and robust 1.2 × 1.2 mm solder pins, the 231-474/001-000 is engineered for secure through-hole mounting on printed circuit boards. Its grey polyamide insulating housing, shrouded contact arrangement, integrated coding fingers and anti-rotation protection support reliable connector alignment and mechanical stability.
With 14 electrical poles, an IEC rated current of up to 16 A and a rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions, this male header is suitable for industrial control electronics, modular automation systems and PCB-based power and signal distribution. Its right-angle configuration enables practical side-entry connections in compact electronic assemblies.
The WAGO MCS MIDI Classic connector system is designed to establish dependable, detachable electrical connections between printed circuit boards and external wiring assemblies. The WAGO 231-474/001-000 uses robust square solder pins to provide permanent electrical connections to PCB tracks, while its shrouded male mating interface allows compatible female connectors to be connected or removed during equipment assembly and maintenance.
The connector's 90° angled configuration enables wiring connections parallel to the PCB surface, making it particularly suitable for electronic equipment with limited vertical clearance or side-entry cable routing. Its tin-plated copper contacts, durable polyamide housing and integrated coding features support reliable electrical performance and consistent connector alignment in industrial applications.
The MCS MIDI Classic system is designed for modular industrial electronics and control equipment. As a connector system without breaking capacity, mating and unmating must be performed only when de-energised and not under load. Equipment designers must also ensure that accessible male contacts cannot become live when the mating connector is disconnected.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 14 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic, 231 Series | |
| Model | 231-474/001-000 | |
| Product type | Angled male PCB header | |
| Connector technology | Through-hole technology (THT) | |
| Number of potentials | 14 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| Connector orientation | Angled / 90° right-angle | |
| Mating direction | Parallel to PCB surface | |
| Mounting type | PCB through-hole mounting | |
| Termination type | Solder pins | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Rated current (IEC) | Up to 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated surge voltage (IEC, II/2) | 4 kV | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Contact gender | Male | |
| Housing configuration | Shrouded | |
| Coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Width | 73.2 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Weight | Approximately 5.4 g | |
| Packaging unit | 50 pieces | |
| Standards | IEC/EN 61984, UL 1059, UL 1977 | |
| Environmental compliance | RoHS compliant |
The WAGO 231-474/001-000 is a 14-pole angled male PCB header designed to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial electronics, automation equipment and control systems.
The connector features 14 poles arranged in a single row with a 5 mm pin spacing, allowing fourteen separate electrical connection potentials through one PCB-mounted header.
The connector supports an IEC rated current of up to 16 A and a rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. The rated surge voltage under these conditions is 4 kV. Applicable ratings depend on the installation and mating connector.
The connector uses through-hole solder mounting with 1.2 × 1.2 mm square solder pins. Its angled construction allows a compatible mating connector to be inserted parallel to the printed circuit board.
The 231-474/001-000 features a 90° angled mating orientation for connections parallel to the PCB surface. A straight male header has a mating direction perpendicular to the PCB, making the angled version useful for side-entry wiring and compact electronic assemblies.
The WAGO 231-474/001-000 is designed for use with compatible 14-pole female connectors from the WAGO MCS MIDI Classic system with matching 5 mm pitch and mating geometry. Connector coding and electrical ratings should be checked when selecting the mating component.
No. The WAGO MCS MIDI Classic system includes connectors without breaking capacity. The connector must be mated or unmated only when de-energised, and accessible male contacts must not remain live when the mating connector is removed.
WAGO MCS MIDI Classic PCB connectors provide industrial equipment manufacturers, electronics engineers and automation specialists with dependable electrical connectivity, robust through-hole mounting and flexible modular wiring interfaces for modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.