Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.32
The WAGO 231-472/001-000 is a professional 12-pole right-angle male PCB header designed for dependable pluggable connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector combines a 5 mm contact pitch, robust 1.2 × 1.2 mm square solder pins and a grey insulating housing.
Designed for through-hole PCB mounting (THT), the WAGO 231-472/001-000 provides a permanent soldered connection to the printed circuit board and a detachable interface for a compatible female connector. Its 90° right-angle configuration allows the mating connector to approach parallel to the PCB, making it especially useful for equipment requiring horizontal cable entry.
With a 16 A IEC rated current, voltage ratings of up to 630 V under specified IEC installation conditions and a four-sided shrouded contact interface, this WAGO PCB header is suitable for appropriately designed industrial power, control and signal connections.
The WAGO 231-472/001-000 provides a robust electrical interface between a printed circuit board and a compatible pluggable female connector. Its twelve angled solder pins are inserted into appropriately prepared PCB holes and soldered into position, creating permanent electrical and mechanical connections.
A distinguishing feature of this connector is its 1.2 × 1.2 mm square solder pin construction. These pins contribute to mechanical stability and form part of a connector design with a 16 A IEC rated current. The allowable current in a finished assembly must also account for the mating connector, PCB copper tracks, ambient temperature and installation conditions.
The right-angle configuration allows a compatible female connector to mate horizontally rather than perpendicular to the circuit board. This can simplify enclosure design where vertical clearance is limited and help route wiring towards the edge of a PCB.
Its 5 mm contact pitch provides twelve separate electrical connection positions in a single row. With eleven intervals between the first and last contacts, the contact-centre span is 55 mm.
The four-sided shrouded housing helps guide the mating connector into position and provides a defined contact interface. Coding fingers allow appropriate connector configurations to be distinguished, helping reduce assembly errors when several similar connections are present.
The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the grey PA66 housing offers insulation and mechanical protection. Its UL 94 V-0 flammability classification supports integration into professionally designed industrial electronic equipment.
The WAGO 231-472/001-000 uses through-hole technology with 1.2 × 1.2 mm square solder pins. The connector must be installed in a suitable PCB footprint and soldered using a process appropriate for the board design and component materials.
Its 63.2 mm overall width, 12.2 mm height and 12 mm depth should be considered when planning PCB placement and enclosure dimensions. Designers should also allow clearance for the mating connector, attached conductors and cable bend radius.
Important termination distinction: The WAGO 231-472/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology, depending on the selected mating component.
Before choosing a mating connector, verify the 12-pole configuration, 5 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5.08 mm pitch should not automatically be considered interchangeable with this 5 mm pitch header.
Important safety information: The WAGO MCS connection system should not be treated as a load-breaking connector. Do not mate or unmate the connector while energised or under load. Safely isolate the circuit before connection or disconnection, and ensure accessible male contacts cannot remain live when unmated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-472/001-000 | |
| EAN / GTIN | 4044918930628 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | Male PCB header | |
| Connector configuration | Angled / right-angle | |
| Connector gender | Male | |
| Number of contacts | 12 | |
| Number of potentials | 12 | |
| Number of contact rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A under applicable approval conditions | |
| Rated voltage (UL) | Up to 600 V under the applicable classification | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | 90° / right-angle | |
| Mating direction relative to PCB | Parallel | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Contact tail length | Approximately 3.81 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Housing configuration | Four-sided shrouded | |
| Connector coding | Coding fingers | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Width | 63.2 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Insulation height | 8.4 mm | |
| Contact-centre span | 55 mm between the first and last contact centres | |
| Weight | Approximately 4.59 g | |
| Packaging type | Box | |
| Relevant standards and approvals | IEC/EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-472/001-000 is a 12-pole right-angle male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5 mm contact pitch, 1.2 × 1.2 mm solder pins and through-hole termination.
The connector has 12 poles, providing twelve male electrical contacts arranged in a single row at a 5 mm pitch.
The WAGO 231-472/001-000 is an angled, right-angle male PCB header. Its mating direction is parallel to the printed circuit board, allowing horizontal connector entry.
The connector has a 16 A IEC rated current and a 15 A UL rated current under applicable approval conditions. The permissible current of the complete connection depends on the mating connector, PCB design and installation conditions.
The connector has a 630 V IEC rating under overvoltage category II, pollution degree 2 conditions. A voltage rating of up to 600 V is also specified under the applicable UL classification. The permitted operating voltage depends on the relevant installation conditions.
The WAGO 231-472/001-000 has a 5 mm contact pitch. This should not be confused with 5.08 mm pitch variants, which may require different PCB footprints and mating components.
The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.
No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination.
The connector measures 63.2 mm wide, 12.2 mm high and 12 mm deep, with an insulation height of 8.4 mm. The distance between the first and last contact centres is 55 mm.
No. The connector must not be mated or unmated while energised or under load. The circuit must be safely isolated before connection or disconnection, and accessible male header contacts must not remain live when unmated.
WAGO MCS MIDI Classic PCB headers combine robust through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping engineers and equipment manufacturers build organised, reliable and maintenance-friendly industrial electronic assemblies.
Technical reference: WAGO 231-472/001-000 manufacturer product information. Confirm electrical ratings, mechanical dimensions and mating compatibility against the latest manufacturer documentation before final design approval.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.