231-470/001-000 Wago Male Connector, With Angled Solder Pins 10-Pole Gray

231-470/001-000 Wago Male Connector, With Angled Solder Pins 10-Pole Gray

SKU: 231-470/001-000MPN: 231-470/001-000
Price
List Price £2.24 ex VAT
Your Price (ex VAT) Save 15%
£1.90 15% OFF
You save £0.336 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £1.90
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 100

£1.90

Why Choose the WAGO 231-470/001-000 10-Pole Angled Male PCB Header?

The WAGO 231-470/001-000 is a professional 10-pole right-angle male PCB header designed for reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5 mm contact pitch, 1.2 × 1.2 mm square solder pins and a durable grey insulating housing.

Designed for through-hole PCB mounting (THT), the WAGO 231-470/001-000 establishes a permanent soldered connection to the printed circuit board while providing a detachable mating interface for a compatible female connector. Its 90° right-angle orientation allows the mating connector and attached wiring to approach parallel to the PCB, making it particularly useful for electronic equipment where horizontal cable entry is preferred.

With a 16 A IEC rated current, a 250 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions and a four-sided shrouded housing, this WAGO PCB header offers a robust solution for industrial electronics, machinery control systems and modular wire-to-board connections.

Key Advantages

  • 10-pole male PCB header provides ten individual electrical connection positions.
  • 16 A IEC rated current supports appropriately designed industrial power and control circuits.
  • Right-angle connector design allows horizontal mating parallel to the printed circuit board.
  • 5 mm contact pitch provides compact, organised multi-pole connectivity.
  • 1.2 × 1.2 mm square solder pins offer a robust through-hole PCB termination interface.
  • Through-hole solder termination establishes permanent electrical and mechanical connections.
  • Four-sided shrouded housing helps protect the male contacts and guide compatible female connectors.
  • Tin-plated electrolytic copper contacts provide dependable electrical conductivity.
  • Integrated coding fingers support connector identification and configuration.
  • Anti-rotation protection contributes to mechanical stability.
  • Grey polyamide 66 housing provides durable electrical insulation.
  • Pluggable construction supports modular equipment assembly, servicing and replacement.

Key Features

  • WAGO MCS MIDI Classic 231 Series pluggable PCB connection system.
  • 10-pole male header with ten individual electrical contacts.
  • 5 mm contact spacing.
  • 90° right-angle header orientation.
  • Horizontal mating direction relative to the printed circuit board.
  • 16 A IEC rated current.
  • 15 A UL rated current under applicable approval conditions.
  • 250 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions.
  • 320 V IEC rated voltage under overvoltage category III, pollution degree 2 conditions.
  • 630 V IEC rated voltage under overvoltage category II, pollution degree 2 conditions.
  • 4 kV IEC rated impulse voltage.
  • Through-hole technology (THT) for PCB mounting.
  • 1.2 × 1.2 mm square solder pins.
  • Approximately 3.8 mm solder pin projection.
  • Four-sided shrouded male contact interface.
  • Tin-plated electrolytic copper contacts.
  • Grey polyamide 66 insulating housing.
  • UL 94 V-0 flammability classification.
  • -60 to +100 °C operating temperature range.

Reliable 16 A Right-Angle Through-Hole PCB Connection Technology

The WAGO 231-470/001-000 provides a dependable electrical interface between a printed circuit board and a compatible pluggable female connector. Its ten angled solder pins pass through appropriately prepared PCB holes and are soldered into position, establishing permanent electrical and mechanical connections to the circuit board.

A distinguishing feature of this model is its 1.2 × 1.2 mm square solder pin construction. These substantial pins contribute to mechanical stability and form part of a connector design with a 16 A IEC rated current. The permissible current of the complete assembly must also account for the mating connector, PCB conductor dimensions, ambient temperature and installation conditions.

Unlike straight male PCB headers, which generally support mating perpendicular to the circuit board, the right-angle configuration allows the female connector and attached wiring to approach horizontally. This arrangement is particularly useful in industrial equipment where vertical clearance is limited or where cables need to be routed along the edge of the PCB.

The 5 mm contact pitch provides ten individual electrical connection positions in a compact arrangement. With nine intervals between the first and last contacts, the total contact-centre span is 45 mm.

Its four-sided shrouded housing surrounds the male contacts and helps guide compatible mating connectors into position. Coding fingers support connector configuration, while anti-rotation protection contributes to mechanical stability during assembly.

The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the grey PA66 housing offers mechanical protection and electrical insulation. The insulating material has a UL 94 V-0 flammability classification.

With an operating temperature range of -60 to +100 °C, the WAGO 231-470/001-000 can be incorporated into industrial electrical equipment designed to operate within the manufacturer's specified conditions.

PCB Footprint, Soldering and Connector Compatibility

The WAGO 231-470/001-000 uses through-hole technology (THT) with 1.2 × 1.2 mm square solder pins and an approximately 3.8 mm solder pin projection. The pins must be installed into a correctly designed PCB footprint and soldered using an appropriate manufacturing process.

Correct PCB footprint design is important for maintaining suitable mechanical support, solder joint quality and electrical clearances. The connector's 53.2 mm overall width, 12.2 mm height and 12 mm depth should be considered when planning PCB component placement and enclosure clearances.

The 90° right-angle orientation allows the mating connector to approach parallel to the circuit board. Designers should provide adequate clearance for the female connector housing, attached wiring, cable bend radius and any operating tools required during installation or servicing.

Important termination distinction: The WAGO 231-470/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors within the WAGO MCS MIDI Classic system may incorporate CAGE CLAMP® spring pressure technology, depending on the selected mating component.

Before selecting a mating connector, verify the 10-pole configuration, 5 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5.08 mm pitch should not automatically be considered interchangeable with this 5 mm pitch header.

Important safety information: The WAGO MCS connection system does not provide load-breaking capability. Connectors must not be mated or unmated while energised or under load. Safely isolate the circuit before connection or disconnection, and ensure the equipment design prevents accessible male header contacts from remaining live when unmated.

Typical Applications

  • Industrial automation and electronic control boards.
  • PLC interface modules and control electronics.
  • Machine building and OEM electrical equipment.
  • Right-angle wire-to-board electrical connections.
  • Industrial lighting controllers and electronic assemblies.
  • Compact PCB assemblies requiring horizontal cable entry.
  • Modular electronic equipment and replaceable circuit boards.
  • Motor control and monitoring electronics.
  • Industrial power and control modules.
  • Control cabinet electronic interfaces.
  • Equipment requiring a 10-pole, 5 mm pitch, 16 A male PCB header.

Technical Specifications

Tick the specs you need, then view products that match.

Current 16 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 16 A
Material insulation body Thermoplastic
Housing colour Grey
Modular spacing contacts 5 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 5 mm
Number of poles 10
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 320 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 231-470/001-000
EAN / GTIN 4044918930574
Series 231 / MCS MIDI Classic
Product type Male PCB header
Connector configuration Angled / right-angle
Connector gender Male
Number of contacts 10
Number of potentials 10
Number of levels 1
Number of contact rows 1
Contact pitch 5 mm
Rated current (IEC) 16 A
Rated voltage (IEC, III/3) 250 V
Rated impulse voltage (IEC, III/3) 4 kV
Rated voltage (IEC, III/2) 320 V
Rated impulse voltage (IEC, III/2) 4 kV
Rated voltage (IEC, II/2) 630 V
Rated impulse voltage (IEC, II/2) 4 kV
Rated current (UL) 15 A under applicable approval conditions
Rated voltage (UL) Up to 600 V under the applicable classification
PCB mounting technology Through-hole technology (THT)
Termination method Solder
Header orientation 90° / right-angle
Mating direction relative to PCB Parallel
Solder pin cross-section 1.2 × 1.2 mm
Contact tail length Approximately 3.8 mm
Contact material Electrolytic copper
Contact plating Tin
Insulating material Polyamide 66 (PA66)
Housing configuration Four-sided shrouded
Connector coding Coding fingers
Anti-rotation protection Yes
Flammability classification UL 94 V-0
Operating temperature range -60 to +100 °C
Width 53.2 mm
Height 12.2 mm
Height above PCB 8.4 mm
Depth 12 mm
Contact-centre span 45 mm between the first and last contact centres
Weight Approximately 3.8 g
Packaging Box
RoHS compliance Compliant
Relevant standards IEC/EN 61984, UL 1059, UL 1977 and applicable CSA requirements

Frequently Asked Questions

What is the WAGO 231-470/001-000?

The WAGO 231-470/001-000 is a 10-pole right-angle male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5 mm contact pitch, 1.2 × 1.2 mm solder pins and through-hole termination.

How many poles does the WAGO 231-470/001-000 have?

The connector has 10 poles, providing ten male electrical contacts arranged in a single row at a 5 mm pitch.

Is the WAGO 231-470/001-000 a straight or angled connector?

The WAGO 231-470/001-000 is an angled, right-angle male PCB header. Its mating direction is parallel to the printed circuit board, allowing horizontal connector entry.

What is the rated current of the WAGO 231-470/001-000?

The connector has a 16 A IEC rated current and a 15 A UL rated current under applicable approval conditions. The permissible current of the complete connection depends on the mating connector, PCB design and installation conditions.

What voltage rating does the WAGO 231-470/001-000 support?

The connector is rated at 250 V under IEC overvoltage category III, pollution degree 3 conditions, 320 V under category III, pollution degree 2 conditions and 630 V under category II, pollution degree 2 conditions.

What is the contact pitch of the WAGO 231-470/001-000?

The WAGO 231-470/001-000 has a 5 mm contact pitch. This should not be confused with 5.08 mm pitch variants, which may require different PCB footprints and mating components.

How is the WAGO 231-470/001-000 mounted?

The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.

Does the WAGO 231-470/001-000 use CAGE CLAMP wire termination?

No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP spring pressure technology for conductor termination.

What are the dimensions of the WAGO 231-470/001-000?

The connector measures 53.2 mm wide, 12.2 mm high and 12 mm deep, with a height of 8.4 mm above the PCB surface.

Can the WAGO 231-470/001-000 be connected or disconnected while powered?

No. The connector must not be mated or unmated while energised or under load. The electrical circuit must be safely isolated before connection or disconnection, and accessible male header pins must not remain live when unmated.

Designed for Professional Industrial PCB Connection Systems

WAGO MCS MIDI Classic PCB headers combine robust through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping electrical engineers, machine builders and automation specialists create organised, reliable and maintenance-friendly industrial electronic assemblies.

Technical reference: WAGO 231-470/001-000 manufacturer product information. Electrical ratings and mechanical dimensions should be checked against the latest manufacturer documentation before final design approval.