231-469/001-000 Wago Male Connector, With Angled Solder Pins 9-Pole Gray

231-469/001-000 Wago Male Connector, With Angled Solder Pins 9-Pole Gray

SKU: 231-469/001-000MPN: 231-469/001-000
Price
List Price £2.01 ex VAT
Your Price (ex VAT) Save 15%
£1.71 15% OFF
You save £0.3015 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £1.71
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 100

£1.71

WAGO 231-469/001-000 9-Pole Angled THT Male PCB Header – 5 mm Pitch, 16 A, Grey

The WAGO 231-469/001-000 is a 9-pole angled male PCB header from the WAGO MCS MIDI Classic Series 231. Designed for industrial wire-to-board connections, it combines 5 mm contact spacing, 1.2 × 1.2 mm square solder pins and a 16 A IEC rated current in a compact, grey, shrouded connector housing.

Its 90° right-angle configuration allows a compatible female pluggable connector to mate parallel to the printed circuit board. This makes the WAGO 231-469/001-000 particularly useful for industrial control electronics, machinery interfaces and PCB assemblies where wiring needs to enter from the side rather than above the board.

Featuring through-hole technology (THT), tin-plated electrolytic copper contacts and a polyamide insulating housing, this nine-position connector provides a dependable electrical interface for compatible WAGO pluggable connection systems.

Key Advantages

  • 9-pole male PCB header for organised multi-circuit connections.
  • 16 A IEC rated current for suitably designed industrial circuits.
  • 5 mm contact pitch for compatible WAGO MCS MIDI Classic connectors.
  • Right-angle orientation enables mating parallel to the PCB.
  • 1.2 × 1.2 mm solder pins provide a substantial through-hole termination interface.
  • Through-hole PCB mounting for conventional soldering processes.
  • Four-sided shrouded mating interface helps guide and protect the male contacts.
  • Grey insulating housing provides straightforward component identification.
  • Tin-plated electrolytic copper contacts support reliable electrical conductivity.
  • Single-row arrangement accommodates nine electrical positions.
  • Suitable for detachable wire-to-board connector systems.
  • Compact angled design helps reduce vertical clearance requirements.
  • Supports modular assembly and servicing of industrial equipment.
  • Suitable for industrial automation, control panels and OEM electronics.
  • RoHS-compliant product construction.

Key Features

  • WAGO MCS MIDI Classic Series 231.
  • 9-pole male PCB header.
  • Single-row, single-level configuration.
  • 5 mm nominal contact spacing.
  • 90° angled, right-angle connector orientation.
  • Mating direction parallel to the PCB surface.
  • Through-hole technology (THT).
  • Solder-pin termination.
  • 1.2 × 1.2 mm square solder pins.
  • Approximately 3.81 mm solder contact tail length.
  • 16 A IEC rated current.
  • 250 V IEC rated voltage under category III, pollution degree 3 conditions.
  • 320 V IEC rated voltage under category III, pollution degree 2 conditions.
  • 630 V IEC rated voltage under category II, pollution degree 2 conditions.
  • 4 kV rated impulse withstand voltage.
  • Grey polyamide 66 insulating housing.
  • Electrolytic copper contacts with tin plating.
  • Four-sided shrouded male interface.
  • UL94 V-0 material flammability classification.
  • Material temperature range of −60 to +100 °C.

Dimensions and PCB Design Considerations

The WAGO 231-469/001-000 features nine contacts at 5 mm spacing, providing a distance of 40 mm between the first and last contact centres.

The manufacturer's dimensional relationships for this connector configuration use the following references:

  • L = (number of poles − 1) × contact pitch + 8.2 mm
  • L1 = L + 5 mm
  • L2 = L1 + 7.4 mm

For the 9-pole, 5 mm-pitch configuration, these relationships give:

  • L: 48.2 mm
  • L1: 53.2 mm
  • L2: 60.6 mm

These are labelled dimensional references rather than interchangeable measurements of the connector's overall width or PCB footprint. Always use the exact WAGO dimensional drawing when designing the circuit board and checking mechanical clearances.

Reliable Right-Angle PCB Connections with 16 A Current Capacity

The WAGO 231-469/001-000 provides a detachable electrical interface between a printed circuit board and a compatible female connector. Its nine solder pins are inserted through correctly dimensioned PCB holes and soldered to establish permanent electrical connections to the board.

The 1.2 × 1.2 mm square solder pins distinguish this header from related lower-current Series 231 versions that use 1.0 × 1.0 mm pins. The larger contact cross-section is associated with the product's 16 A IEC rated current, subject to the ratings of the complete connector assembly and the application conditions.

The right-angle mating orientation allows the female connector to approach parallel to the PCB surface. This is especially useful in compact enclosures, PCB edge arrangements and equipment where there is insufficient space for a vertically mounted connector.

The 5 mm contact pitch provides nine independent electrical positions in a single-row format. It is important not to confuse this spacing with the 5.08 mm pitch used by other WAGO MCS MIDI Classic components. The selected female connector must match the exact pitch and mechanical interface.

The four-sided shrouded housing helps guide the mating connector and provides mechanical protection around the male contacts. Tin-plated electrolytic copper contacts support electrical conductivity, while the grey polyamide housing provides insulation between adjacent positions.

The WAGO 231-469/001-000 is a solder-terminated PCB header, not a direct wire-entry terminal block. External conductors are terminated in a separately selected compatible female connector, which may incorporate WAGO spring-pressure conductor connection technology.

Installation safety: Do not connect or disconnect the mating assembly under load unless the complete connector system is expressly approved for load-breaking operation. Ensure that accessible male contacts cannot remain hazardous when the female connector is removed.

Typical Applications

  • Industrial automation equipment.
  • PLC and industrial control electronics.
  • Printed circuit board assemblies.
  • Machine control systems.
  • Electrical control cabinet modules.
  • PCB edge connection arrangements.
  • Industrial electronic enclosures.
  • OEM machinery and electronic control systems.
  • Detachable wire-to-board connections.
  • Industrial lighting control electronics.
  • Building automation equipment.
  • Sensor and actuator interface modules.
  • Modular power and signal connections within specified ratings.
  • Equipment requiring nine-pole right-angle PCB connectors.
  • Maintenance and replacement of compatible WAGO Series 231 components.

Selecting the Correct WAGO Series 231 PCB Header

The WAGO 231-469/001-000 is specifically a 9-pole, 5 mm-pitch, angled THT header with 1.2 × 1.2 mm solder pins.

It differs from the WAGO 231-468/001-000, which has eight poles but otherwise shares the same general angled THT configuration. The nine-pole version has an additional electrical position and a different PCB footprint.

It also differs from the 231-469/001-000/105-604 variant, which is a black THR male header intended for suitable through-hole reflow assembly processes. The standard 231-469/001-000 is the grey THT version.

Before ordering, confirm the exact manufacturer part number, mating connector, PCB footprint and required electrical ratings.

Technical Specifications

Tick the specs you need, then view products that match.

Current 16 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 16 A
Material insulation body Thermoplastic
Housing colour Grey
Modular spacing contacts 5 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 5 mm
Number of poles 9
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 320 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 231-469/001-000
Series MCS MIDI Classic 231
Product type Angled THT male PCB header
Connector gender Male
Number of electrical positions 9
Number of rows 1
Number of levels 1
Contact pitch 5 mm / 0.197 in
Connector orientation 90° right-angle
Mating direction Parallel to PCB surface
PCB mounting method Through-hole technology (THT)
Termination method Soldering
Solder-pin cross-section 1.2 × 1.2 mm
Contact tail length Approximately 3.81 mm
Rated current (IEC) 16 A
Rated voltage (IEC, III/3) 250 V
Rated voltage (IEC, III/2) 320 V
Rated voltage (IEC, II/2) 630 V
Rated impulse withstand voltage 4 kV
Rated current (UL) 15 A
UL voltage rating Up to 600 V under applicable approval conditions
Contact material Electrolytic copper
Contact plating Tin
Housing material Polyamide 66 (PA66)
Housing construction Four-sided shrouded
Insulation height Approximately 8.4 mm
Flammability classification UL94 V-0
Material temperature range −60 to +100 °C
Anti-rotation protection Yes
RoHS compliance Yes
Country of origin Germany
Standard packaging unit 100 pieces
GTIN / EAN Confirm against the manufacturer datasheet

Frequently Asked Questions

What is the WAGO 231-469/001-000?

The WAGO 231-469/001-000 is a 9-pole angled male PCB header from the MCS MIDI Classic Series 231, featuring 5 mm contact spacing, through-hole solder termination and a grey insulating housing.

How many poles does the WAGO 231-469/001-000 have?

The connector has 9 poles, providing nine independent electrical connection positions in a single row.

What is the contact pitch?

The WAGO 231-469/001-000 has a nominal contact pitch of 5 mm. It should not be confused with connectors using 5.08 mm spacing.

Is the WAGO 231-469/001-000 straight or angled?

It is an angled, right-angle PCB header. The mating connector approaches parallel to the PCB surface.

What is the rated current?

The connector has an IEC rated current of 16 A. The permissible operating current also depends on the mating connector, PCB design and installation conditions.

What is the rated voltage?

The IEC voltage ratings are 250 V for overvoltage category III, pollution degree 3; 320 V for category III, pollution degree 2; and 630 V for category II, pollution degree 2.

What are the solder-pin dimensions?

The WAGO 231-469/001-000 uses 1.2 × 1.2 mm square solder pins with an approximately 3.81 mm contact tail length. The PCB hole pattern and drill dimensions should be confirmed against the manufacturer's dimensional drawing.

How is the WAGO 231-469/001-000 mounted?

It uses through-hole technology (THT). Its solder pins are inserted through the printed circuit board and soldered to the PCB.

What colour is the WAGO 231-469/001-000?

The standard WAGO 231-469/001-000 has a grey polyamide insulating housing.

Does the WAGO 231-469/001-000 use CAGE CLAMP® technology?

No. The male header itself uses solder-pin PCB termination. A compatible female connector may use WAGO CAGE CLAMP® spring-pressure technology for external conductors.

What is the difference between WAGO 231-469/001-000 and 231-468/001-000?

Both are angled THT male PCB headers with 5 mm contact spacing and 1.2 × 1.2 mm solder pins. The 231-469/001-000 has 9 poles, while the 231-468/001-000 has 8 poles. Their PCB footprints and physical lengths are therefore different.

What is the difference between the standard and /105-604 variants?

The standard 231-469/001-000 is a grey THT male PCB header. The 231-469/001-000/105-604 is a black THR version intended for suitable through-hole reflow soldering processes.

Can the connector be disconnected while energised?

Do not connect or disconnect the header under load unless the complete connector system is specifically approved for load-breaking operation. Follow appropriate electrical isolation procedures.

What mating connector is required?

The WAGO 231-469/001-000 requires a compatible 9-pole female connector with 5 mm pitch and the correct mating geometry. Confirm the exact female connector part number and electrical ratings using WAGO documentation.

WAGO PCB Connection Technology for Professional Industrial Electronics

The WAGO 231-469/001-000 combines nine electrical positions, 5 mm contact spacing, 1.2 × 1.2 mm solder pins and a 16 A IEC current rating in a compact right-angle male PCB header. Its shrouded mating interface and grey insulating housing make it a practical component for compatible industrial wire-to-board connection systems.

Official manufacturer reference: WAGO 231-469/001-000 Product Information