Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.782
The WAGO 231-464/001-000 is a robust 4-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for detachable electrical connections between printed circuit boards and compatible pluggable connectors, it features a 5 mm contact pitch, 1.2 × 1.2 mm square solder pins and a durable grey insulating housing.
Its right-angle construction allows compatible female connectors to mate parallel to the PCB surface, making it suitable for industrial control equipment, machine electronics and assemblies requiring horizontal cable routing. The four contact positions provide a convenient, serviceable interface for connecting external wiring to permanently soldered PCB circuits.
With a 16 A IEC rated current, an IEC voltage rating of up to 630 V under the applicable installation conditions, and a temperature range of −60 to +100 °C, the WAGO 231-464/001-000 is designed for demanding industrial electrical applications. Its tin-plated electrolytic copper contacts, shrouded housing and anti-rotation protection contribute to dependable PCB-to-wire connectivity.
The WAGO 231-464/001-000 is designed to provide a dependable electrical interface for printed circuit boards requiring horizontal connector mating. Its four robust square solder pins form permanent electrical connections to the PCB, while the angled male mating interface allows compatible female connectors to be attached from the side.
The 1.2 × 1.2 mm solder pin dimensions support the header's 16 A IEC rated current and provide greater mechanical robustness than smaller pin configurations. Tin-plated electrolytic copper contacts offer reliable conductivity and solderability, while the grey PA66 housing provides insulation between adjacent electrical potentials.
The shrouded construction helps guide the mating connector and protect the male contacts from incidental mechanical damage. Integrated coding provisions and anti-rotation protection further support organised assembly and dependable installation in industrial electronic equipment.
For a complete electrical connection, the WAGO 231-464/001-000 must be used with a compatible female connector. The permissible operating current and voltage of the assembled connection depend on the mating component, PCB copper track design, solder joints, ambient temperature and applicable installation requirements.
Safety: The MCS MIDI Classic connector system is not intended for load-breaking operation. Electrical circuits must be safely isolated before mating or unmating, and equipment must be designed to prevent exposed male header contacts from presenting an electrical hazard when disconnected.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Part number | 231-464/001-000 | |
| Product type | Angled THT male PCB header | |
| Product description | THT male header; 1.2 × 1.2 mm solder pin; angled; pin spacing 5 mm; 4-pole; grey | |
| Connector gender | Male | |
| Number of electrical contact positions | 4 | |
| Number of contact rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB termination method | Solder | |
| Header orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° (parallel to PCB surface) | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder tail length | Approximately 3.8 mm | |
| Rated current (IEC) | 16 A | |
| Maximum rated voltage (IEC) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Connector housing | Shrouded on four sides | |
| Mating interface | Compatible WAGO MCS MIDI Classic female connector | |
| Connector coding | Coding fingers | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Insulation height | 8.4 mm | |
| Mounting type | PCB through-hole mounting | |
| Typical packaging unit | 200 pieces | |
| Relevant standards and approvals | IEC/EN 61984, UL 1059, UL 1977 and CSA C22.2 | |
| RoHS compliance | RoHS compliant | |
| Country of origin | Germany |
The WAGO 231-464/001-000 is a 4-pole angled THT male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial control and electronic equipment.
It has 4 poles, arranged in a single row at a 5 mm contact pitch.
It is an angled, right-angle PCB header. Its mating direction is parallel to the printed circuit board, making it suitable for horizontal cable routing.
The header has a 16 A IEC rated current and a 15 A UL rated current. The allowable current of the complete connection also depends on the mating connector and PCB assembly.
The connector has an IEC rated voltage of up to 630 V, depending on the applicable installation conditions, and a UL voltage rating of 600 V.
The WAGO 231-464/001-000 uses 1.2 × 1.2 mm square solder pins with a solder tail length of approximately 3.8 mm.
Both are 4-pole angled THT male headers with a 5 mm pitch. However, the WAGO 231-464/001-000 uses 1.2 × 1.2 mm solder pins and has a 16 A IEC current rating, whereas the 231-434/001-000 uses 1.0 × 1.0 mm solder pins and has a 12 A IEC current rating. Their PCB mounting requirements must be checked before substitution.
No. It is a solder-mounted male PCB header, not a wire-terminating female connector. Compatible female connectors within the MCS MIDI Classic system may use WAGO CAGE CLAMP® spring pressure conductor termination.
The 231-464/001-000 is a grey conventional THT male header, while the 231-464/001-000/105-604 is a black THR variant intended for reflow soldering applications. Their assembly processes and PCB mounting requirements should be checked before substitution.
No. The connector is not designed for load-breaking operation. Safely isolate the circuit before mating or unmating, and ensure that exposed male contacts cannot remain dangerously live.
WAGO MCS MIDI Classic connectors provide dependable, modular electrical interfaces for industrial electronics and automation equipment. The WAGO 231-464/001-000 combines a robust 4-pole right-angle THT male header, 5 mm contact pitch, 16 A IEC current rating and tin-plated electrolytic copper contacts to support reliable, serviceable PCB-to-wire connections in professional control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.