231-463/001-000 Wago Male Connector, With Angled Solder Pins 3-Pole Gray

231-463/001-000 Wago Male Connector, With Angled Solder Pins 3-Pole Gray

SKU: 231-463/001-000MPN: 231-463/001-000
Price
List Price £0.68 ex VAT
Your Price (ex VAT) Save 15%
£0.578 15% OFF
You save £0.102 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £0.58
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 200

£0.578

Why Choose the WAGO 231-463/001-000 3-Pole Angled Male PCB Header?

The WAGO 231-463/001-000 is a professional 3-pole right-angle male PCB header designed for reliable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5 mm contact pitch, 1.2 × 1.2 mm square solder pins and a durable grey insulating housing.

Designed for through-hole PCB mounting (THT), the WAGO 231-463/001-000 provides a permanent soldered connection to a printed circuit board while allowing a compatible female connector to be plugged into its male contact interface. Its 90° right-angle orientation allows the mating connector to approach parallel to the PCB, making it particularly suitable for equipment where horizontal cable routing is preferred.

With a 16 A IEC rated current, a 630 V IEC voltage rating under applicable conditions, and a four-sided shrouded housing, this three-position WAGO PCB header provides a dependable solution for modular industrial electronics, machinery control systems and wire-to-board connections.

Key Advantages

  • 3-pole male PCB header provides three separate electrical connection positions.
  • 16 A IEC rated current supports appropriately designed industrial power and control circuits.
  • Right-angle connector design enables horizontal mating parallel to the printed circuit board.
  • 5 mm contact pitch provides compact, organised three-position connectivity.
  • 1.2 × 1.2 mm square solder pins provide a robust PCB termination interface.
  • Through-hole solder termination establishes permanent electrical and mechanical connections.
  • Four-sided shrouded housing helps protect the male contacts and guide compatible mating connectors.
  • Tin-plated electrolytic copper contacts provide dependable electrical conductivity.
  • Integrated coding fingers support connector identification and configuration.
  • Anti-rotation protection contributes to mechanical stability.
  • Grey PA66 housing provides durable electrical insulation.
  • Pluggable construction supports modular assembly, servicing and replacement.

Key Features

  • WAGO MCS MIDI Classic 231 Series pluggable PCB connection system.
  • 3-pole male header with three electrical contact positions.
  • 5 mm contact spacing.
  • 90° right-angle header orientation.
  • Horizontal mating direction relative to the PCB.
  • 16 A IEC rated current.
  • 15 A UL rated current.
  • 630 V IEC voltage rating under applicable installation conditions.
  • 600 V UL voltage rating under the applicable classification.
  • Through-hole technology (THT) for PCB mounting.
  • 1.2 × 1.2 mm square solder pins.
  • 3.81 mm contact tail length.
  • Four-sided shrouded male contact interface.
  • Tin-plated electrolytic copper contacts.
  • Grey polyamide 66 insulating housing.
  • UL 94 V-0 flammability classification.
  • -60 to +100 °C operating temperature range.

Reliable 16 A Right-Angle Through-Hole PCB Connection Technology

The WAGO 231-463/001-000 provides a reliable connection between a printed circuit board and a compatible pluggable female connector. Its three angled solder pins are inserted into suitable PCB holes and soldered into position, creating permanent electrical and mechanical connections.

A key feature of this model is its 1.2 × 1.2 mm square solder pin construction. These substantial solder pins contribute to mechanical stability and form part of a connector design rated at 16 A under IEC conditions. The final permissible current must also account for the mating connector, PCB copper tracks, operating temperature and applicable installation requirements.

Unlike straight male PCB headers, which are generally designed for mating perpendicular to the circuit board, the right-angle configuration allows the female connector and attached conductors to approach horizontally. This arrangement is particularly useful in compact control equipment where vertical clearance is restricted or wiring needs to be routed along the edge of the PCB.

The 5 mm contact pitch provides three individual electrical connection positions in a compact arrangement. The distance between the first and last contact centres is 10 mm, making the component suitable for appropriately designed three-pole PCB footprints.

Its four-sided shrouded housing surrounds the male contacts and helps guide a compatible mating connector into position. Coding fingers and anti-rotation protection support reliable connector assembly and mechanical stability.

The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the grey PA66 insulating housing offers mechanical protection and electrical insulation. The housing also has a UL 94 V-0 flammability classification.

With a specified operating temperature range of -60 to +100 °C, the WAGO 231-463/001-000 can be incorporated into industrial electrical assemblies designed to operate within these limits.

PCB Footprint, Soldering and Connector Compatibility

The WAGO 231-463/001-000 uses through-hole technology (THT) with 1.2 × 1.2 mm square solder pins and a 3.81 mm contact tail length. The pins are designed for insertion into a suitable PCB footprint and permanent soldering.

The connector has an overall length of 18.2 mm, a depth of 12 mm and an insulation height of 8.4 mm. These dimensions should be considered when planning the PCB layout, surrounding components and enclosure clearances.

The 90° right-angle orientation allows the mating connector to approach parallel to the circuit board. Designers should provide sufficient space for the mating connector housing, cable bend radius, conductor entry and any tools required for installation or servicing.

Important termination distinction: The WAGO 231-463/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology, depending on the selected mating component.

Before selecting a mating connector, verify the 3-pole configuration, 5 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5.08 mm pitch should not automatically be considered interchangeable with this 5 mm pitch header.

Important safety information: Do not connect or disconnect the WAGO 231-463/001-000 while energised or under load unless the complete system is specifically approved for that operation. Safely isolate the circuit before maintenance, and ensure the equipment design prevents exposed male contacts from remaining live when unmated.

Typical Applications

  • Industrial automation and electronic control boards.
  • PLC interface modules and control electronics.
  • Machine building and OEM electrical equipment.
  • Right-angle wire-to-board electrical connections.
  • Industrial lighting controllers and electronic assemblies.
  • Compact PCB assemblies requiring horizontal cable entry.
  • Modular electronic equipment and replaceable circuit boards.
  • Motor control and monitoring electronics.
  • Industrial power and control modules.
  • Control cabinet electronic interfaces.
  • Equipment requiring a 3-pole, 5 mm pitch, 16 A male PCB header.

Technical Specifications

Tick the specs you need, then view products that match.

Current 16 A
Voltage 320 V
Product Series WAGO 231
Rated surge voltage 4 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 16 A
Material insulation body Thermoplastic
Housing colour Grey
Modular spacing contacts 5 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 5 mm
Number of poles 3
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 320 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 231-463/001-000
Series 231 / MCS MIDI Classic
Product type THT male PCB header
Connector configuration Angled / right-angle
Connector gender Male
Number of contacts 3
Number of levels 1
Number of contact rows 1
Contact pitch 5 mm
Rated current (IEC) 16 A
Rated voltage (IEC) 630 V under applicable conditions
Rated current (UL) 15 A
Rated voltage (UL) 600 V under the applicable classification
PCB mounting technology Through-hole technology (THT)
Termination method Solder
Header orientation 90° / right-angle
Mating direction relative to PCB Parallel
Solder pin cross-section 1.2 × 1.2 mm
Contact tail length 3.81 mm
Contact material Electrolytic copper
Contact plating Tin
Insulating material Polyamide 66 (PA66)
Housing configuration Four-sided shrouded
Connector coding Coding fingers
Anti-rotation protection Yes
Flammability classification UL 94 V-0
Operating temperature range -60 to +100 °C
Overall length 18.2 mm
Depth 12 mm
Insulation height 8.4 mm
Contact-centre span 10 mm between the first and last contact centres
Packaging Box
Compliance RoHS compliant
Relevant standards IEC/EN 61984, UL 1059 and UL 1977

Frequently Asked Questions

What is the WAGO 231-463/001-000?

The WAGO 231-463/001-000 is a 3-pole right-angle male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5 mm contact pitch, 1.2 × 1.2 mm solder pins and through-hole termination.

How many poles does the WAGO 231-463/001-000 have?

The connector has 3 poles, providing three male electrical contacts arranged in a single row at a 5 mm pitch.

Is the WAGO 231-463/001-000 a straight or angled connector?

The WAGO 231-463/001-000 is an angled, right-angle male PCB header. Its mating direction is parallel to the printed circuit board, allowing horizontal connector entry.

What is the rated current of the WAGO 231-463/001-000?

The connector has a 16 A IEC rated current and a 15 A UL rated current under applicable approval conditions. The permissible current of the complete connection depends on the mating connector, PCB design and installation conditions.

What voltage rating does the WAGO 231-463/001-000 support?

The connector has a 630 V IEC voltage rating and a 600 V UL voltage rating under their respective applicable conditions. The permitted operating voltage must be determined from the complete assembly and installation requirements.

What is the contact pitch of the WAGO 231-463/001-000?

The WAGO 231-463/001-000 has a 5 mm contact pitch. This should not be confused with 5.08 mm pitch variants, which may require different PCB footprints and mating components.

How is the WAGO 231-463/001-000 mounted?

The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.

Does the WAGO 231-463/001-000 use CAGE CLAMP termination?

No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP spring pressure technology for conductor termination.

What are the dimensions of the WAGO 231-463/001-000?

The connector measures 18.2 mm long and 12 mm deep, with an insulation height of 8.4 mm. The distance between the first and last contact centres is 10 mm.

Can the WAGO 231-463/001-000 be connected or disconnected while powered?

Do not connect or disconnect the WAGO 231-463/001-000 while energised or under load unless the complete system is specifically approved for that operation. Safely isolate the circuit before maintenance.

Designed for Professional Industrial PCB Connection Systems

WAGO MCS MIDI Classic PCB headers combine robust through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping engineers, machine builders and automation specialists create organised and service-friendly industrial electronic assemblies.