Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.10
The WAGO 231-448/001-000 is an 18-pole angled male PCB header designed for reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 series, this connector features a 5 mm contact pitch, 1.0 × 1.0 mm square solder pins and a durable grey insulating housing.
Its 90° right-angle configuration allows a compatible female connector to mate parallel to the PCB surface. This makes the WAGO 231-448/001-000 particularly useful for industrial equipment where wiring needs to approach the circuit board from the side, including enclosure-edge connections, control modules and electronic assemblies with limited vertical clearance.
With 18 independent electrical connection positions, an IEC rated current of 12 A, tin-plated electrolytic copper contacts and a four-sided shrouded mating interface, this connector offers a practical solution for professional industrial PCB connection systems.
The WAGO 231-448/001-000 uses a single-row arrangement with 18 contacts at 5 mm spacing. The distance between the first and last contact centres is therefore 85 mm.
WAGO provides the following dimensional relationships for this connector family:
For the 18-pole, 5 mm-pitch configuration, these relationships give:
These values represent the manufacturer's labelled dimensional references and should not be treated interchangeably as overall width, mounting length or clearance dimensions. Refer to the official WAGO dimensional drawing when preparing the PCB footprint and enclosure layout.
The WAGO 231-448/001-000 provides a dependable interface between a printed circuit board and a detachable female connector. Its 18 solder contacts are inserted through prepared PCB holes and soldered to establish permanent electrical connections to the circuit board.
The connector's defining feature is its right-angle mating orientation. Unlike straight male headers, which present their mating interface perpendicular to the PCB surface, this angled version allows a compatible female connector to approach parallel to the board. This arrangement can improve wiring access in shallow enclosures and simplify connections along the edge of an electronic assembly.
The 5 mm contact pitch allows 18 independent circuits to be organised in a single-row interface. It is important not to confuse this spacing with the 5.08 mm pitch used by other WAGO MCS MIDI Classic 231 variants. Matching the exact contact spacing and mechanical configuration is essential when selecting a female connector.
The four-sided shrouded housing provides a defined mating interface, helping guide the female connector and protect the male contacts against incidental mechanical damage. Tin-plated electrolytic copper contacts support electrical conductivity, while the grey polyamide insulating housing provides separation between adjacent circuits.
The WAGO 231-448/001-000 is a solder-terminated male PCB header, not a direct wire-entry terminal block. External conductors are terminated in a separately selected compatible female connector, which may use WAGO spring pressure connection technology depending on the chosen part number.
The connector is not intended for load breaking. Do not connect or disconnect the mating assembly while energised or under load unless the complete connection system is expressly approved for that operation. Equipment design should also prevent accessible male contacts from remaining live when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 18 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-448/001-000 | |
| Series | MCS MIDI Classic 231 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of electrical positions | 18 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| PCB mounting | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Header orientation | Angled / right-angle | |
| Mating direction | Parallel to PCB surface | |
| Contact orientation | 90° | |
| Solder-pin cross-section | 1.0 × 1.0 mm | |
| Contact tail length | Approximately 3.81 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V under applicable approval conditions | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Housing construction | Four-sided shrouded | |
| Insulation height | Approximately 8.4 mm | |
| Flammability classification | UL94 V-0 | |
| Material temperature limits | −60 to +100 °C | |
| Anti-rotation protection | Yes | |
| RoHS compliance | Yes | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918866576 | |
| Standard packaging unit | 50 pieces | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-448/001-000 is an 18-pole angled male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female pluggable connector. It is suitable for industrial automation, control electronics and PCB assemblies.
The connector has 18 poles, providing 18 independent electrical connection positions in a single-row arrangement.
The connector has a nominal contact pitch of 5 mm. This differs from the 5.08 mm spacing used by some other WAGO 231 series connectors.
It is an angled, right-angle PCB header. Its mating interface is oriented parallel to the PCB surface, making it useful for edge-accessible connections and compact equipment layouts.
The connector uses through-hole technology (THT). Its solder pins are inserted through prepared PCB holes and soldered to the circuit board.
The connector features 1.0 × 1.0 mm square solder pins with an approximately 3.81 mm contact tail length. The PCB footprint and drilled-hole dimensions should be confirmed using the manufacturer's dimensional drawing.
The connector has an IEC rated current of 12 A. Its UL rated current is 10 A under applicable approval conditions.
The connector has IEC voltage ratings of 320 V under category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the installation environment and complete mating assembly.
The standard WAGO 231-448/001-000 features a grey insulating housing.
No. The WAGO 231-448/001-000 is a male PCB header with solder-pin termination. A compatible female connector may use WAGO CAGE CLAMP® technology for conductor termination, but the header itself is soldered to the PCB.
Both are angled THT male PCB headers with 5 mm contact spacing and 1.0 × 1.0 mm solder pins. The 231-448/001-000 has 18 poles, while the 231-438/001-000 has 8 poles. Their physical lengths and PCB footprints are therefore different.
The connector is not designed for load breaking. It must not be connected or disconnected while live or under load unless the complete connection system is expressly approved for that operation. Follow appropriate electrical isolation and safety procedures.
The WAGO 231-448/001-000 requires a compatible 18-pole female connector with 5 mm contact spacing and the correct mating geometry. Verify the exact mating part number, electrical ratings and mechanical configuration using WAGO documentation.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machinery and PCB assembly. Combining an 18-pole arrangement, 5 mm pitch, angled THT solder pins, tin-plated contacts and a four-sided shrouded housing, the WAGO 231-448/001-000 offers a practical right-angle male PCB header for professional industrial electronic installations.
Manufacturer reference: WAGO 231-448/001-000 Official Product Information
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.