Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.58
The WAGO 231-445/001-000 is a 15-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial printed circuit board connections, this connector provides a reliable, detachable interface between electronic assemblies and compatible female cable connectors.
Featuring a 5 mm contact pitch, 1 × 1 mm square solder pins and a 90° right-angle orientation, the WAGO 231-445/001-000 supports horizontal connector access and efficient cable routing. Its grey polyamide housing, four-sided shrouded mating interface and tin-plated electrolytic copper contacts make it suitable for industrial automation, electrical control equipment and OEM electronics.
With an IEC rated current of 12 A and a rated voltage of up to 630 V under specified IEC insulation conditions, this 15-position PCB header supports suitable power and control circuits. The through-hole solder connection provides mechanical stability, while the pluggable design allows connected wiring assemblies to be detached for installation, maintenance or equipment replacement.
The WAGO MCS MIDI Classic Series provides modular pluggable connection solutions for industrial electronics, automation systems and printed circuit board assemblies. Its male PCB headers and compatible female connectors enable equipment manufacturers to create detachable electrical interfaces between circuit boards and external wiring.
The WAGO 231-445/001-000 combines 15 contact positions with a 5 mm pitch and an angled through-hole mounting arrangement. Its right-angle design allows a compatible female connector to be inserted parallel to the PCB surface, making it useful in compact control equipment, enclosed electronic assemblies and applications where cables must be routed along the board.
The connector measures 78.2 mm wide, 12.2 mm high and 12 mm deep, with an insulating housing height of 8.4 mm above the PCB surface. Its 1 × 1 mm square solder pins extend approximately 3.8 mm for conventional through-hole solder termination.
Unlike female cable connectors that may use WAGO's CAGE CLAMP® spring pressure connection technology, this male PCB header connects directly to the circuit board through soldered pins. External conductors are terminated in a separately selected compatible female connector.
Important safety information: WAGO MCS pluggable connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating connector, and equipment design must prevent accessible male contacts from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 15 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-445/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Total number of potentials | 15 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° / parallel to PCB surface | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 3.8 mm | |
| Drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Solder pin arrangement | In-line across the male connector | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 78.2 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 78.2 × 12.2 × 12 mm | |
| Weight | Approximately 4.82 g | |
| Mismating protection | No | |
| Anti-rotation protection | Yes | |
| Mounting method | PCB through-hole solder mounting | |
| RoHS compliance | Compliant | |
| GTIN | 4044918866484 | |
| Relevant standards and approvals | IEC 61984, EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-445/001-000 is a 15-pole angled male PCB header used to provide detachable electrical connections between a printed circuit board and a compatible WAGO MCS MIDI Classic female connector.
The connector has 15 poles, providing fifteen independent electrical contact positions arranged in a single row.
The header has a 5 mm contact pitch. This is different from the 5.08 mm pitch used by certain other WAGO 231 Series variants, so the correct mating connector must be selected.
It is an angled, right-angle PCB header. Its mating direction is parallel to the PCB surface, making it suitable for side-entry connector arrangements and horizontal cable routing.
The header uses through-hole technology (THT). Its square solder pins are inserted into drilled PCB holes and soldered to provide a permanent electrical and mechanical connection.
The connector has an IEC rated current of 12 A and a rated voltage of up to 630 V under overvoltage category II, pollution degree 2 conditions. Its UL 1059 Use Group B and D ratings are 300 V and 10 A.
The WAGO 231-445/001-000 uses 1 × 1 mm square solder pins with a solder pin length of approximately 3.8 mm.
The manufacturer's specification gives a 1.4 mm drilled hole diameter with a +0.1 mm tolerance. The complete PCB footprint should be checked against WAGO's dimensional drawing before production.
The connector measures 78.2 mm wide, 12.2 mm high and 12 mm deep. The insulating housing extends 8.4 mm above the PCB surface.
The header has a grey polyamide insulating housing and tin-plated electrolytic copper contacts.
The specified temperature limit range is −60 to +100 °C. The operating limits of the complete assembly also depend on the mating connector, PCB design, current loading and installation conditions.
No. This product is a male PCB header with solder pins. It connects directly to the circuit board, while external conductors are terminated in a separately selected compatible female connector.
Both products are 15-pole THT male PCB headers with 5 mm pitch. The 231-445/001-000 is angled for horizontal mating, while the 231-145/001-000 is straight for perpendicular mating relative to the PCB.
The header is designed for use with appropriately matched 15-pole WAGO MCS MIDI Classic female connectors having the correct 5 mm pitch and mating geometry. WAGO identifies the 2231-115/026-000 female connector as a counterpart. Compatibility should be confirmed using the manufacturer's mating connector documentation.
No. WAGO MCS connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating plug, and accessible header contacts must not remain live when unmated.
The GTIN is 4044918866484, which can be used to identify the exact WAGO product when ordering or checking stock records.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel builders and industrial automation equipment manufacturers. The WAGO 231-445/001-000 combines fifteen reliable male contacts, angled through-hole solder termination and a 5 mm pitch to provide a dependable, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.