Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.52
The WAGO 231-439/001-000 is a professional 9-pole right-angle male PCB header designed for reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5 mm contact pitch, 1.0 × 1.0 mm square solder pins and a durable grey insulating housing.
Designed for through-hole PCB mounting, the WAGO 231-439/001-000 allows a compatible female connector to mate parallel to the printed circuit board. Its angled configuration is particularly useful for electronic equipment where wiring needs to approach from the side, helping engineers accommodate enclosure layouts with limited vertical clearance.
With a 12 A IEC rated current, 630 V IEC rated voltage under overvoltage category II, pollution degree 2 conditions and a four-sided shrouded housing, this WAGO PCB header provides a dependable solution for modular electronic equipment requiring organised nine-position connectivity.
The WAGO 231-439/001-000 provides a reliable electrical interface between a printed circuit board and a compatible pluggable female connector. Its nine angled solder pins pass through prepared PCB holes and are soldered into position, creating permanent electrical and mechanical connections to the circuit board.
Unlike straight male PCB headers, which are generally designed for perpendicular connector mating, the right-angle configuration allows the mating connector and attached wiring to approach horizontally. This can help engineers design compact electronic assemblies and improve cable routing where space above the PCB is limited.
The 5 mm contact pitch provides a practical balance between connection density and electrical separation. With nine individual contact positions, the connector can accommodate multiple control signals or power connections through a single organised interface, subject to the specified electrical ratings.
Its four-sided shrouded housing surrounds the male contacts and helps guide compatible female connectors into position. Integrated coding fingers can be used with suitable mating components to distinguish different connection points, helping reduce the likelihood of incorrect assembly in equipment containing several similar connectors.
The tin-plated electrolytic copper contacts provide reliable electrical conductivity, while the grey PA66 housing offers durable insulation and mechanical protection. Its UL 94 V-0 flammability classification supports use in appropriately designed industrial electronic equipment.
The connector's -60 to +100 °C operating temperature range makes it suitable for a variety of industrial environments when installed within the manufacturer's specified operating conditions.
The WAGO 231-439/001-000 uses through-hole solder termination. Its male contacts are electrically connected to the PCB through soldered pins, rather than through a direct conductor clamping mechanism.
Compatible female cable connectors within the WAGO MCS MIDI Classic connection system may incorporate CAGE CLAMP® spring pressure technology for conductor termination. This allows a detachable wiring interface to be formed between a permanently mounted PCB header and a suitably specified female connector.
Before selecting a mating connector, engineers should verify the 9-pole configuration, 5 mm pitch, mating geometry, coding arrangement and electrical ratings. A connector with a 5.08 mm pitch should not automatically be treated as interchangeable with a 5 mm pitch component.
Important installation information: The WAGO 231-439/001-000 must be installed using a PCB footprint and soldering process appropriate for its specified pin dimensions. The WAGO MCS connection system does not provide load-breaking capability, so connectors must not be mated or unmated while energised or under load. The electrical circuit must be safely isolated before connection or disconnection, and accessible male header contacts must not remain live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 9 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-439/001-000 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | Male PCB header | |
| Connector configuration | Angled / right-angle | |
| Connector gender | Male | |
| Number of contacts | 9 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV under the applicable specified conditions | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V under the applicable UL classification | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Right-angle / horizontal | |
| Mating direction relative to PCB | Parallel | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Contact tail length | Approximately 3.81 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Housing configuration | Four-sided shrouded | |
| Connector coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Insulation height | 8.4 mm | |
| Contact span | 40 mm between the first and last contact centres | |
| Housing length | Approximately 48.2 mm, calculated from the series dimensional formula | |
| Standard packaging | Box | |
| Relevant standards | IEC/EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-439/001-000 is a 9-pole right-angle male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5 mm contact pitch and through-hole solder termination.
The connector has 9 poles, providing nine male electrical contacts arranged in a single row at a 5 mm pitch.
The WAGO 231-439/001-000 is an angled, right-angle male PCB header. Its mating direction is parallel to the printed circuit board, allowing horizontal connector entry.
The connector has a 12 A IEC rated current and a 10 A UL rated current under applicable approval conditions. The permissible current of the complete connection depends on the mating connector, PCB design and installation conditions.
The connector supports a 320 V IEC rating under overvoltage category III, pollution degree 3 conditions and a 630 V IEC rating under overvoltage category II, pollution degree 2 conditions. A 600 V UL rating is also listed under the applicable UL classification.
The WAGO 231-439/001-000 has a 5 mm contact pitch. This should not be confused with 5.08 mm pitch variants, which may require different PCB footprints and mating components.
The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.
No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination.
The WAGO 231-439/001-000 has a grey insulating housing made from polyamide 66 (PA66), with a UL 94 V-0 flammability classification.
No. The connector must not be mated or unmated while energised or under load. The electrical circuit must be safely isolated before connection or disconnection, and accessible male header pins must not remain live when unmated.
WAGO MCS MIDI Classic PCB headers combine dependable through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping engineers and equipment manufacturers create organised, reliable and maintenance-friendly electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.