Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.38
The WAGO 231-438/001-000 is an 8-pole angled male PCB header designed for reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 series, this connector features a 5 mm contact pitch, 1.0 × 1.0 mm solder pins and a durable grey insulating housing.
Unlike straight PCB headers, the WAGO 231-438/001-000 uses a 90° right-angle configuration, allowing a compatible female connector to mate parallel to the PCB surface. This makes it particularly useful for compact equipment, edge-accessible connections and industrial electronic assemblies where vertical connector clearance is limited.
With an IEC rated current of 12 A, voltage ratings of up to 630 V under specified IEC conditions, tin-plated electrolytic copper contacts and a four-sided shrouded mating interface, this connector offers a practical solution for professional PCB connection systems.
The WAGO 231-438/001-000 provides an electrical interface between a printed circuit board and a detachable female connector. Its eight solder contacts are mounted through prepared PCB holes and soldered to establish permanent electrical connections to the circuit board.
The connector's defining feature is its right-angle mating orientation. Unlike straight headers, which present their mating contacts perpendicular to the PCB, this angled header allows a compatible female connector to approach parallel to the board. This can simplify wiring access in shallow enclosures and enable connections along the edge of an electronic assembly.
The 5 mm contact pitch allows eight independent electrical circuits to be arranged within one compact connector interface. This spacing must not be confused with the 5.08 mm pitch used by other WAGO 231 series variants. The exact mating connector must match the 5 mm version and the appropriate mechanical configuration.
The four-sided shrouded housing helps guide the mating connector and protect the male contacts against incidental mechanical contact. Tin-plated electrolytic copper contacts support reliable conductivity, while the grey PA66 housing provides insulation between adjacent electrical positions.
The WAGO 231-438/001-000 is a solder-terminated male PCB header. It does not directly accept stripped conductors. External wiring is terminated in a suitable mating female connector, which may use spring pressure connection technology depending on the selected part number.
This connector is not intended for load breaking. It must not be connected or disconnected while energised or under load unless the complete system is expressly approved for that operation. Equipment design should also prevent exposed male contacts from remaining live when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-438/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of electrical positions | 8 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact spacing | 5 mm | |
| PCB mounting | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Header orientation | Angled / right-angle | |
| Mating orientation | Parallel to PCB surface | |
| Contact orientation | 90° | |
| Solder-pin cross-section | 1.0 × 1.0 mm | |
| Contact tail length | Approximately 3.81 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | Up to 600 V under applicable approval conditions | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Housing construction | Four-sided shrouded | |
| Insulation height | Approximately 8.4 mm | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Integrated locking | No | |
| RoHS compliance | Yes | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918866262 | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-438/001-000 is an 8-pole angled male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female pluggable connector. It is suitable for industrial automation, control electronics and PCB assemblies.
The connector has 8 poles, providing eight independent electrical connection positions in a single-row arrangement.
The connector has a nominal contact pitch of 5 mm. This is different from the 5.08 mm spacing used by some other WAGO 231 series connectors.
It is an angled, right-angle PCB header. Its mating interface is oriented parallel to the PCB surface, making it useful for edge-accessible connections and compact equipment layouts.
The connector uses through-hole technology (THT). Its solder pins are inserted through prepared PCB holes and soldered to the circuit board.
The connector features 1.0 × 1.0 mm square solder pins. The contact tail length is approximately 3.81 mm. The final PCB footprint and hole dimensions should be confirmed using the manufacturer's dimensional drawing.
The WAGO 231-438/001-000 has an IEC rated current of 12 A. Its IEC voltage ratings include 320 V under applicable category III conditions and 630 V under category II, pollution degree 2 conditions. The permitted rating depends on the installation environment and complete connector assembly.
The standard WAGO 231-438/001-000 has a grey insulating housing.
No. The WAGO 231-438/001-000 is a male PCB header with solder-pin termination. A compatible female connector may use WAGO spring pressure connection technology for external wiring, but the male header itself is soldered to the PCB.
No. The standard WAGO 231-438/001-000 does not feature an integrated mechanical locking mechanism. Applications requiring positive connector retention should use an appropriately specified connector arrangement.
Both are 8-pole male THT PCB headers from the MCS MIDI Classic 231 series with 5 mm contact spacing. The 231-438/001-000 is an angled, right-angle version, while the 231-138/001-000 is a straight header. Their PCB footprints and mating orientations differ.
The connector is not designed for load breaking. It must not be connected or disconnected while live or under load unless the complete connection system is expressly approved for that operation. Follow the applicable electrical isolation and safety procedures.
The WAGO 231-438/001-000 requires a compatible 8-pole female connector with 5 mm contact spacing and the correct mating geometry. Verify the exact mating part number, electrical ratings and mechanical configuration using WAGO documentation.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machinery and PCB assembly. Combining a compact 8-pole arrangement, 5 mm pitch, angled THT solder pins, tin-plated contacts and a four-sided shrouded housing, the WAGO 231-438/001-000 offers a practical right-angle male PCB header for professional industrial electronic installations.
Manufacturer reference: WAGO 231-438/001-000 Official Product Information
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.