Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.74
The WAGO 231-438/001-000/105-604/029-000 is a specialist through-hole reflow (THR) male PCB header from the WAGO MCS MIDI Classic 231 connector family. Designed for pluggable wire-to-board connections in industrial electronics, this component belongs to a series of compact male headers that combine soldered PCB contacts with a detachable mating interface.
The closely related 231-438/001-000/105-604 configuration is an 8-pole, 5 mm-pitch, right-angle male header featuring 1 × 1 mm square solder pins, a black insulating housing and a four-sided shrouded connector interface. These characteristics provide a useful reference for identifying the extended-suffix product, although the additional /029-000 variant designation must be checked against the exact WAGO drawing or datasheet before treating all specifications as identical.
THR connector technology is particularly useful in PCB manufacturing environments where through-hole components need to be incorporated into a reflow soldering process. The WAGO 231 connector family supports modular industrial equipment, control electronics and OEM assemblies that require dependable electrical interfaces and convenient separation of field wiring from the circuit board.
Important: The following values are taken from the documented 231-438/001-000/105-604 configuration. The full /029-000 variant is separately listed as a THR male header, but a complete variant-specific datasheet was not located. Confirm the extended part number before final PCB design or electrical approval.
The WAGO 231-438/001-000/105-604/029-000 belongs to a connector family designed for applications requiring a robust soldered connection to a printed circuit board and a detachable mating interface for external wiring.
Through-hole reflow (THR) technology combines through-hole solder contacts with a manufacturing approach suitable for selected reflow soldering processes. Rather than relying solely on conventional wave or hand soldering, THR components can be incorporated into compatible production processes when the PCB design, solder paste application, component temperature limits and reflow profile are correctly specified.
The documented base configuration uses eight contacts at a 5 mm pitch, allowing multiple electrical circuits to be arranged within a single-row connector. Its right-angle interface is particularly useful when wiring must approach the PCB from the side or when available vertical clearance is limited.
The base configuration also features a four-sided shrouded male interface. This provides a defined mechanical mating area for a compatible female connector. The shroud helps guide the mating component and provides some mechanical protection to the contacts.
Because this is a male PCB header, external conductors are not terminated directly into the header housing. Instead, the header is soldered to the PCB, while a separately selected compatible female connector provides the field-wiring interface.
Compatibility note: A matching pole count and contact pitch do not, by themselves, guarantee compatibility. The complete mating arrangement must also match the connector geometry, coding, locking features and electrical requirements.
Electrical safety: Do not mate or disconnect the connector under load unless the complete assembly is specifically approved for load-breaking operation. Isolate circuits before servicing and prevent accessible male contacts from remaining energised when the connector is unmated.
The WAGO 231-438/001-000/105-604/029-000 is listed as a THR male header from the WAGO 231 connector family. The exact significance of the final /029-000 suffix should be confirmed with WAGO.
The documented 231-438/001-000/105-604 base configuration has 8 poles. Confirm that the same configuration applies to the full /029-000 variant before installation.
The documented base configuration has a nominal 5 mm contact pitch. This differs from the 5.08 mm pitch used by certain other WAGO 231 series connectors.
The documented 231-438/001-000/105-604 configuration is a 90° right-angle male header. The exact geometry of the extended /029-000 variant should be confirmed against its manufacturer drawing.
THR stands for through-hole reflow. It refers to a PCB assembly process in which suitable through-hole component leads are soldered using an appropriately designed reflow process.
The documented base configuration uses 1 × 1 mm square solder pins with a 2.4 mm contact tail length. Confirm the exact PCB footprint for the full part number before manufacturing.
The documented base configuration has an IEC rated current of 12 A and a UL rated current of 10 A under applicable approval conditions. The complete /029-000 variant and mating assembly must be checked before applying these ratings.
The documented base configuration has IEC voltage ratings of 320 V under category III conditions and 630 V under category II, pollution degree 2 conditions. Applicable ratings depend on the installation and complete connector assembly.
The documented /105-604 base configuration has a black housing. The final /029-000 suffix should be checked to confirm whether it introduces any colour or other construction differences.
The documented base configuration uses glass-filled polyphthalamide (PPA) with a UL94 V-0 flammability classification. This material should not be confused with the PA66 housings used by some other Series 231 connectors.
The /105-604 configuration is documented as a black THR male header. The full /105-604/029-000 part number is separately listed as a THR male header, but the additional /029-000 variant designation has not been independently decoded. The two part numbers should not be assumed interchangeable without manufacturer confirmation.
No. It is a male PCB header intended for soldered PCB termination. External conductors are connected using an appropriately selected female mating connector.
Do not connect or disconnect the header under load unless the complete connection system is expressly approved for that operation. Follow safe electrical isolation procedures and ensure accessible male contacts cannot remain live when unmated.
Select a compatible 8-pole female connector with matching 5 mm contact spacing, suitable electrical ratings and the correct mating geometry. Confirm compatibility with the exact extended-suffix part number using WAGO documentation.
The WAGO MCS MIDI Classic 231 range provides modular pluggable connection options for industrial electronic assemblies. The WAGO 231-438/001-000/105-604/029-000 is identified as a THR male header, making it relevant to PCB connection designs where suitable soldering processes and compatible detachable wiring interfaces are required. Final component selection should be based on the complete manufacturer part number and its approved technical documentation.
Manufacturer reference: WAGO Official Website
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.