Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.19
The WAGO 231-437/001-000 is a 7-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for dependable printed circuit board connections, this component provides a detachable electrical interface between industrial electronic equipment and compatible female cable connectors.
Featuring a 5 mm contact pitch, 1 × 1 mm square solder pins and a 90° right-angle orientation, the WAGO 231-437/001-000 is ideal for applications requiring horizontal connector access. Its grey polyamide insulating housing and four-sided shrouded contact arrangement provide a robust solution for industrial control electronics, automation equipment and modular PCB assemblies.
With an IEC rated current of 12 A and a rated voltage of up to 630 V under specified IEC insulation conditions, this male header supports suitable industrial power and control connections. Tin-plated electrolytic copper contacts, through-hole solder termination and anti-rotation protection make it a practical choice for equipment manufacturers and electrical engineers.
The WAGO MCS MIDI Classic Series provides a modular connection system for industrial electronic equipment, control systems and printed circuit board assemblies. Its male PCB headers and compatible female connectors enable manufacturers to create detachable electrical interfaces between circuit boards and external wiring, supporting efficient equipment assembly and maintenance.
The WAGO 231-437/001-000 combines seven contact positions with a 5 mm pitch and an angled through-hole mounting arrangement. Its right-angle design allows a compatible female connector to be inserted parallel to the PCB, making it useful in applications where vertical space is limited or where cables must be routed along the board surface.
Unlike THR variants intended for suitable reflow soldering processes, the standard 231-437/001-000 is a conventional THT male PCB header. Its solder pins provide the permanent electrical connection to the circuit board, while a separately selected female connector provides the detachable cable interface.
The male header does not incorporate CAGE CLAMP® conductor terminals. Those are found on selected compatible female cable connectors. WAGO MCS connectors are not designed for load-breaking operation and must not be connected or disconnected while energised or under load. Equipment design must also prevent accessible male contacts from remaining live when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 7 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-437/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Total number of potentials | 7 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | Parallel to PCB surface | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder pin cross-section | 1 × 1 mm | |
| Contact tail length | 3.81 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Contact configuration | Male pins, four-sided shrouded | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature range | −60 to +100 °C | |
| Insulation height | 8.4 mm | |
| Anti-rotation protection | Yes | |
| Mounting method | PCB through-hole solder mounting | |
| RoHS compliance | Compliant | |
| GTIN | 4044918866248 | |
| Relevant standards and approvals | IEC 61984, EN 61984, UL 1059, UL 1977 and applicable CSA requirements |
The WAGO 231-437/001-000 is a 7-pole angled male PCB header designed to provide detachable electrical connections between a printed circuit board and a compatible WAGO MCS MIDI Classic female connector.
The connector has 7 poles, providing seven independent electrical contact positions in a single-row arrangement.
The header has a 5 mm contact pitch. This is different from the 5.08 mm pitch used by certain other WAGO 231 Series variants, so the correct mating connector must be selected.
It is an angled, right-angle PCB header. Its mating direction is parallel to the PCB surface, making it suitable for side-entry connector arrangements.
The header uses through-hole technology (THT). Its square solder pins are inserted into the PCB and soldered to provide a permanent electrical and mechanical connection.
The connector has an IEC rated current of 12 A and a rated voltage of up to 630 V under the specified IEC insulation conditions. The published UL ratings include 10 A and up to 600 V, depending on the applicable standard.
The WAGO 231-437/001-000 uses 1 × 1 mm square solder pins. The listed contact tail length is 3.81 mm. The complete PCB footprint should be checked against WAGO's dimensional drawing before production.
The header has a grey polyamide insulating housing and tin-plated metal contacts.
The specified temperature range is −60 to +100 °C. The operating limits of the complete connector assembly also depend on the mating connector, PCB design, electrical loading and installation conditions.
No. This product is a male PCB header with solder pins. It connects directly to the circuit board, while external conductors are terminated in a separately selected compatible female connector.
The 231-437/001-000 is a conventional angled THT male PCB header, while the /105-604 version belongs to the THR range intended for compatible through-hole reflow soldering processes. The exact soldering requirements and dimensions should be checked for each variant.
The header is designed for use with appropriately matched 7-pole WAGO MCS MIDI Classic female connectors having the correct 5 mm pitch and mating geometry. Compatibility should be confirmed using WAGO's mating connector documentation.
No. WAGO MCS connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating plug, and accessible header contacts must not remain live when unmated.
The GTIN is 4044918866248, which can be used to identify the exact WAGO product when ordering or checking stock records.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel builders and industrial automation equipment manufacturers. The WAGO 231-437/001-000 combines seven reliable male contacts, angled through-hole solder termination and a 5 mm pitch to provide a dependable, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.