Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.03
The WAGO 231-436/001-000 is a robust and reliable 6-pole angled male PCB header designed for secure, detachable electrical connections in industrial electronics, automation equipment and printed circuit board assemblies. As part of the WAGO MCS MIDI Classic 231 Series, this through-hole technology (THT) connector provides a dependable interface between printed circuit boards and compatible pluggable female connectors.
Featuring a 5 mm pin spacing, a 90° angled mating orientation and square solder pins, the 231-436/001-000 supports efficient PCB integration where connectors must be accessible from the edge of a circuit board. Its grey polyamide housing, shrouded contact arrangement and integrated coding fingers help ensure reliable connector alignment and secure electrical connections.
With an IEC rated current of 12 A and rated voltages of up to 630 V AC/DC under specified insulation coordination conditions, this male header is suitable for industrial control electronics, power distribution interfaces and modular automation systems. Its right-angle configuration is particularly useful where space constraints or equipment layouts require connections parallel to the PCB surface.
The WAGO MCS MIDI Classic connector system is engineered to provide reliable, detachable electrical connections between printed circuit boards and external wiring assemblies. The WAGO 231-436/001-000 uses square through-hole solder pins to establish a permanent electrical connection to PCB conductors, while its angled male interface allows compatible female connectors to be connected and removed during assembly, maintenance or equipment replacement.
Its 90° mating orientation is especially useful in electronic assemblies where vertical clearance is limited or where cables must enter from the side of a PCB. The shrouded housing, tin-plated contacts and integrated coding features contribute to dependable connector alignment and consistent electrical performance in industrial equipment.
The MCS MIDI Classic series is designed for industrial electronics and automation applications requiring modular wiring connections. In accordance with IEC/EN 61984, these connectors are not intended to be connected or disconnected while live or under load. Circuit designs must also ensure that accessible male contacts cannot become live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic, 231 Series | |
| Model | 231-436/001-000 | |
| Product type | Male PCB header connector | |
| Connector technology | Through-hole technology (THT) | |
| Number of rows | 1 | |
| Pin spacing | 5 mm | |
| Connector orientation | Angled, 90° / right-angle | |
| Mating direction | Parallel to PCB | |
| Mounting type | PCB through-hole mounting | |
| Termination type | Solder pins | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Contact tail length | Approximately 3.8 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Housing material | Polyamide (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Contact gender | Male | |
| Housing configuration | Shrouded male header | |
| Coding | Integrated coding fingers | |
| Insulation height | Approximately 8.4 mm | |
| Overall connector width | Approximately 33.2 mm | |
| Connector standard | IEC/EN 61984 | |
| Environmental compliance | RoHS compliant |
The WAGO 231-436/001-000 is a 6-pole angled male PCB header designed to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial electronic equipment and automation systems.
The connector features 6 poles arranged in a single row with a 5 mm pin spacing, allowing six electrical circuits to be connected through one PCB-mounted header.
The connector has an IEC rated current of 12 A and rated voltages of 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. It also has a 4 kV rated impulse voltage.
This connector uses through-hole solder mounting with 1.0 × 1.0 mm square solder pins. Its 90° angled construction allows the mating connector to be inserted parallel to the printed circuit board.
The 231-436/001-000 features a 90° angled mating orientation, allowing connections parallel to the PCB surface. A straight PCB header has a mating direction perpendicular to the PCB, making the angled version particularly suitable for side-entry wiring and space-constrained electronic assemblies.
No. The WAGO MCS connector system includes connectors without breaking capacity under IEC/EN 61984. Connections must not be made or broken while live or under load, and accessible male contacts must be protected against becoming live when unmated.
WAGO MCS MIDI Classic PCB connectors are designed to support industrial equipment manufacturers, electronics engineers and automation specialists with reliable electrical connectivity, flexible PCB integration and convenient modular wiring interfaces for modern control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.