Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.10
The WAGO 231-436/001-000/105-604 is a high-quality 6-pole angled male PCB header with through-hole reflow (THR) soldering technology, designed for reliable, detachable electrical connections in industrial electronics, automation equipment and printed circuit board assemblies. As part of the WAGO MCS MIDI Classic 231 Series, this connector combines dependable electrical performance with compatibility for modern automated PCB manufacturing processes.
Featuring a 5 mm pin spacing, 90° angled connector construction and 1.0 × 1.0 mm solder pins, the 231-436/001-000/105-604 is engineered for efficient integration into printed circuit boards using through-hole reflow soldering. Its black, glass-fibre-reinforced polyphthalamide housing provides dimensional stability during reflow processing, while the integrated coding fingers and anti-rotation protection support secure and consistent connector installation.
With an IEC rated current of 12 A, rated voltages of up to 630 V under specified insulation coordination conditions and a compact right-angle design, this male header is suitable for industrial control electronics, modular automation equipment and PCB-based power and signal interfaces. Its THR construction makes it particularly useful for manufacturers seeking to integrate through-hole connectors into surface-mount reflow production processes.
The WAGO MCS MIDI Classic connector system is designed to provide dependable, detachable connections between printed circuit boards and external wiring assemblies. The WAGO 231-436/001-000/105-604 incorporates through-hole reflow technology, allowing its solder pins to be inserted into plated PCB holes and soldered during a suitable reflow process. This combines the mechanical advantages of through-hole connections with the manufacturing efficiency of modern surface-mount assembly lines.
Its glass-fibre-reinforced PPA housing provides the thermal stability required for THR processing, while the 90° angled mating interface enables convenient side-entry connections in compact electronic assemblies. Tin-plated copper contacts, variable coding capability and anti-rotation protection further support consistent electrical performance and reliable mechanical integration.
The connector is intended for use with compatible WAGO MCS MIDI Classic mating connectors and is not designed to interrupt electrical loads. In accordance with the requirements for connectors without breaking capacity, mating and unmating must be performed in a de-energised condition, and the equipment design must prevent accessible male contacts from becoming live when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Black | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | THR connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 2.4 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic, 231 Series | |
| Model | 231-436/001-000/105-604 | |
| Product type | THR male PCB header | |
| Connector technology | Through-hole reflow (THR) | |
| Number of potentials | 6 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° (parallel) | |
| Mounting type | PCB through-hole reflow solder mounting | |
| Termination type | Solder pins | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 2.4 mm | |
| Plated through-hole diameter | 1.4 mm (+0.1 mm) | |
| Solder pins per potential | 1 | |
| Solder pin arrangement | In-line | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL 1059) | 10 A | |
| Rated voltage (UL 1059, use groups B/D) | 300 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Limit temperature range | −60 to +100 °C | |
| Processing temperature range | −35 to +60 °C | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Glass-fibre-reinforced polyphthalamide (PPA GF) | |
| Material group | I | |
| Flammability rating | UL 94 V-0 | |
| Contact gender | Male | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Moisture sensitivity level | MSL 1, J-STD-020D | |
| Width | 33.2 mm | |
| Height | 10.8 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Weight | Approximately 2.2 g | |
| Applicable standards | IEC/EN 61984, UL 1059, UL 1977 | |
| Environmental compliance | RoHS compliant |
The WAGO 231-436/001-000/105-604 is a 6-pole angled THR male PCB header used to create detachable electrical connections between printed circuit boards and compatible pluggable connectors in industrial electronics and automation equipment.
The 231-436/001-000/105-604 is the black through-hole reflow (THR) version with 2.4 mm solder pins and a glass-fibre-reinforced PPA housing. The standard 231-436/001-000 is a grey conventional through-hole technology (THT) version intended for traditional PCB soldering processes.
This connector has 6 poles arranged in a single row with a 5 mm pin spacing, providing six separate electrical connection potentials.
The connector has an IEC rated current of 12 A and rated voltages of 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. Its rated surge voltage is 4 kV.
Yes. The 231-436/001-000/105-604 uses through-hole reflow (THR) technology and a thermally stable PPA housing, allowing integration into suitable reflow soldering processes. A separate tape-and-reel packaging variant is available for automated pick-and-place production.
WAGO specifies a 1.4 mm plated through-hole diameter with a +0.1 mm tolerance for the connector's 1.0 × 1.0 mm square solder pins.
No. The WAGO MCS MIDI Classic connector system is designed for connections without breaking capacity. The connector must be mated and unmated only when de-energised, and accessible male contacts must not remain live when the mating connector is removed.
WAGO MCS MIDI Classic THR connectors provide industrial equipment manufacturers, PCB assembly specialists and automation engineers with dependable electrical connectivity, efficient reflow soldering integration and flexible modular wiring interfaces for modern electronic control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.