Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.36
The WAGO 231-436/001-000/105-604/029-000 is a 6-pole angled through-hole reflow (THR) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial printed circuit board connections, this component provides a detachable electrical interface between a PCB and a compatible female cable connector.
Featuring a 5 mm pin spacing, 1 × 1 mm square solder pins and an angled connector arrangement, the WAGO 231-436/001-000/105-604/029-000 is suited to applications requiring horizontal mating access to a PCB-mounted connector. Its THR termination technology combines through-hole mechanical positioning with compatibility for suitable reflow soldering processes.
The corresponding WAGO 231-436/001-000/105-604 configuration is specified with a 12 A IEC rated current, voltage ratings of up to 630 V under defined IEC conditions, and a black insulating housing. The complete /029-000 ordering suffix should be confirmed against the manufacturer's documentation before production, as its individual variant details have not been independently established.
The WAGO MCS MIDI Classic Series provides modular pluggable connection solutions for industrial electronics, automation systems and printed circuit board assemblies. Its range of male PCB headers and compatible female connectors allows manufacturers to create detachable electrical interfaces between circuit boards and external wiring.
The WAGO 231-436/001-000/105-604 header configuration combines a 6-pole, 5 mm pitch arrangement with an angled mating interface and through-hole reflow solder termination. Unlike conventional THT connectors intended for wave or selective soldering, THR connectors are designed for compatible reflow soldering processes, allowing them to be integrated into suitable PCB manufacturing workflows.
The angled connector geometry provides mating access from the side of the PCB rather than perpendicular to its surface. This can be particularly useful in compact control equipment, enclosed electronic assemblies and applications where cable routing must remain parallel to the board.
As a male PCB header, the component does not incorporate CAGE CLAMP® conductor terminals. Electrical connection to the PCB is made through soldered pins, while external conductors are terminated using a separately selected compatible female connector. The assembly must be correctly rated for the intended circuit and must not be used for load-breaking operations.
Variant identification: The full ordering reference 231-436/001-000/105-604/029-000 is listed as a THR male header. The detailed electrical and dimensional information above is based on the corresponding manufacturer-documented 231-436/001-000/105-604 configuration. Any additional requirements associated with the /029-000 suffix should be checked before specifying the product for manufacture.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-436/001-000/105-604/029-000 |
| Series | MCS MIDI Classic 231 Series |
| Product type | THR male PCB header |
| Connector gender | Male |
| Number of poles | 6 |
| Total number of potentials | 6 |
| Number of levels | 1 |
| Number of contact rows | 1 |
| Pin spacing | 5 mm |
| Connector orientation | Angled / right-angle |
| Mating direction relative to PCB | Parallel to PCB surface |
| PCB contact technology | Through-hole reflow (THR) |
| Termination method | Soldering |
| Solder pin dimensions | 1 × 1 mm |
| Solder pin length | 2.4 mm for the documented /105-604 configuration |
| Plated through-hole diameter | 1.4 mm (+0.1 mm tolerance) |
| Number of solder pins per potential | 1 |
| Solder pin arrangement | In-line across the male connector |
| Rated current (IEC) | 12 A |
| Rated voltage (IEC, II/2) | 630 V |
| Rated voltage (IEC, III/2) | 320 V |
| Rated voltage (IEC, III/3) | 320 V |
| Rated impulse voltage (IEC) | 4 kV |
| Rated current (UL 1059, Use Group B) | 10 A |
| Rated voltage (UL 1059, Use Group B) | 300 V |
| Rated current (UL 1059, Use Group D) | 10 A |
| Rated voltage (UL 1059, Use Group D) | 300 V |
| Rated current (UL 1977) | 10 A |
| Rated voltage (UL 1977) | 600 V |
| Contact material | Electrolytic copper |
| Contact plating | Tin |
| Housing colour | Black for the documented /105-604 configuration |
| Housing material | Reflow-compatible insulating material; exact material designation for the complete ordering suffix requires confirmation |
| Temperature limit range | −60 to +100 °C for the documented connector configuration |
| Width | 33.2 mm |
| Height | 10.8 mm |
| Height above PCB surface | 8.4 mm |
| Depth | 12 mm |
| Dimensions (W × H × D) | 33.2 × 10.8 × 12 mm for the documented /105-604 configuration |
| Contact arrangement | Single-row, four-sided shrouded |
| Variable coding | Yes |
| Anti-rotation protection | Yes |
| Dedicated mismating protection | No |
| Complete /029-000 variant specification | Requires manufacturer confirmation |
The WAGO 231-436/001-000/105-604/029-000 is listed as a THR male PCB header. Its corresponding manufacturer-documented configuration is a 6-pole angled connector with 5 mm pin spacing and 1 × 1 mm square solder pins.
The WAGO 231-436 connector configuration has 6 poles, providing six separate electrical contact positions arranged in a single row.
THR stands for Through-Hole Reflow. It is a PCB assembly technology in which connector pins pass through plated holes and are soldered using a suitable reflow process. This can allow through-hole components to be integrated into compatible automated PCB manufacturing processes.
It is an angled, right-angle male PCB header. The mating direction is parallel to the PCB surface, making it suitable for applications requiring side-entry cable connections.
The connector has a 5 mm pin spacing. This is different from the 5.08 mm pitch used by some other WAGO 231 Series variants, so mating compatibility must be checked carefully.
The documented /105-604 configuration has an IEC rated current of 12 A and a rated voltage of up to 630 V under overvoltage category II, pollution degree 2 conditions. Its IEC category III voltage rating is 320 V.
The documented connector uses 1 × 1 mm square solder pins with a 2.4 mm solder pin length. The manufacturer's THR dimensional drawing should be used when designing the PCB footprint.
The manufacturer's specification for the documented THR configuration gives a 1.4 mm plated through-hole diameter with a +0.1 mm tolerance. PCB land patterns and solder paste requirements should be determined from the complete manufacturer's assembly documentation.
The documented /105-604 configuration measures 33.2 mm wide, 10.8 mm high and 12 mm deep, with an insulation height of 8.4 mm above the PCB surface.
The manufacturer-documented 231-436/001-000/105-604 configuration has a black housing. The complete /029-000 variant should be checked against the product-specific documentation before confirming its appearance.
No. This product is a male PCB header with solder pins. It connects directly to the circuit board, while external conductors are terminated in a separately selected compatible female connector.
The precise significance of the /029-000 suffix has not been independently verified. The full manufacturer reference should be checked to establish whether the suffix identifies a special configuration, processing option or other ordering characteristic.
The header is intended for use with appropriately matched 6-pole WAGO MCS MIDI Classic female connectors having the correct 5 mm pitch and mating geometry. Compatibility should be confirmed using WAGO's product-specific mating connector documentation.
No. WAGO MCS pluggable connectors are not designed for load-breaking operation. The circuit must be isolated before connecting or disconnecting the mating plug, and accessible male contacts must not remain live when unmated.
WAGO MCS MIDI Classic connectors are established components for electronic engineers, control panel manufacturers and industrial automation equipment builders. The WAGO 231-436/001-000/105-604/029-000 provides a 6-pole angled THR header configuration for compact, detachable PCB connections, combining 5 mm contact spacing with a soldering technology suited to compatible automated electronics manufacturing processes.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.