Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.833
The WAGO 231-435/001-000 is a high-quality 5-pole angled male PCB header designed for secure and reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. As part of the established WAGO 231 Series MCS MIDI Classic connector range, it provides a compact and dependable connection solution for equipment manufacturers, PCB designers and industrial automation engineers.
Featuring a through-hole technology (THT) mounting arrangement, this male header is designed for permanent soldered installation onto printed circuit boards. Its angled configuration enables connectors to be mated parallel to the PCB surface, making it particularly suitable for applications requiring horizontal cable entry or limited vertical installation space. The 1.0 × 1.0 mm square solder pins provide dependable electrical connections between PCB circuits and compatible female pluggable connectors.
With a 5-pole configuration, 5 mm pin spacing and an IEC rated current of 12 A, the WAGO 231-435/001-000 is suitable for industrial control, power distribution and electronic equipment interconnection applications. The header has a rated voltage of 320 V under IEC overvoltage category III, pollution degree 3 conditions, and 630 V under category II, pollution degree 2 conditions. Its durable grey polyamide housing, tin-plated copper contacts and integrated coding provisions provide reliable PCB-to-wire connectivity in industrial environments.
Angled PCB headers such as the WAGO 231-435/001-000 provide an efficient method of connecting printed circuit boards to external wiring through detachable female connectors. The header is permanently soldered to the PCB, while a compatible female connector provides the removable wiring interface. Its right-angle configuration enables the mating connector to be inserted parallel to the PCB surface, making it particularly useful for electronic equipment with restricted vertical clearance or applications requiring horizontal cable routing.
The WAGO MCS MIDI Classic 231 Series is designed for dependable industrial electrical interconnections. Its 5 mm pitch, robust grey polyamide housing and tin-plated copper contacts provide a reliable connection interface for industrial PCB assemblies. The WAGO 231-435/001-000 is compatible with appropriately matched 5-pole female connectors, including the WAGO 231-105/026-000 CAGE CLAMP® connector and the WAGO 232-105/026-000 angled female connector. Coding fingers allow optional coding keys to be fitted, helping prevent incorrect connections, while anti-rotation protection supports mechanical alignment. The header itself is a soldered PCB component and does not contain conductor clamping terminals. As the WAGO MCS connector system does not provide load-breaking capability, connectors must not be connected or disconnected while live or under load, and accessible male header contacts must not remain energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-435/001-000 | |
| Product type | Male PCB header / pluggable connector header | |
| Connector type | Male connector / plug | |
| Contact configuration | Shrouded male pins | |
| Number of electrical potentials | 5 | |
| Number of connection types | 1 | |
| Number of connection levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Solder pin arrangement | In-line across the connector | |
| Solder pins per potential | 1 | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 3.8 mm | |
| Recommended PCB drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Header orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integral mismating protection | No | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Width | 28.2 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 28.2 × 12.2 × 12 mm | |
| Weight | Approx. 1.7 g | |
| Fire load | 0.061 MJ | |
| Temperature limit range | -60 to +100 °C | |
| Processing temperature | -35 to +60 °C | |
| Mounting type | PCB through-hole solder mounting | |
| Connector arrangement | Single-row, 5-position | |
| Relevant standards and approvals | IEC/EN 61984, UL 1059, UL 1977 and CSA C22.2 | |
| RoHS compliance | Compliant, no exemption | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918866170 | |
| Product group | WAGO Multi Connection System | |
| Application | Industrial PCB connections, automation equipment, control electronics and modular electrical assemblies |
The WAGO 231-435/001-000 is a 5-pole angled male PCB header used to establish detachable electrical connections between printed circuit boards and compatible female connectors. Its right-angle configuration enables horizontal connector mating, making it suitable for industrial automation equipment, control electronics and PCB assemblies.
The connector uses through-hole technology (THT) with five angled solder pins measuring 1.0 × 1.0 mm and extending 3.8 mm from the header. The pins are inserted into appropriately positioned PCB holes and soldered to establish permanent electrical connections. The recommended drilled hole diameter is 1.4 mm with a positive tolerance of 0.1 mm.
The connector has an IEC rated current of 12 A and a rated voltage of 320 V under overvoltage category III, pollution degree 3 conditions. Under overvoltage category II, pollution degree 2 conditions, the rated voltage is 630 V. Its rated impulse voltage is 4 kV. The applicable electrical ratings depend on the complete connector assembly and installation conditions.
The header is designed for compatible 5-pole WAGO MCS MIDI Classic female connectors with 5 mm pin spacing. Suitable counterparts include the WAGO 231-105/026-000 CAGE CLAMP® female connector, the 231-105/037-000 variant with lateral locking levers and selected 232 Series angled female connectors. The mating configuration, retention features and any coding requirements should be checked before installation.
The angled male header design provides a compact, horizontally mating connection interface for PCB assemblies. This allows cables and mating connectors to be routed parallel to the board surface, helping reduce vertical clearance requirements. Its THT solder pins provide secure PCB termination, while integrated coding fingers, anti-rotation protection and tin-plated copper contacts support dependable industrial electrical connectivity.
WAGO MCS MIDI Classic connectors provide dependable PCB interconnection solutions for industrial automation, electronic equipment and machinery manufacturing. The WAGO 231-435/001-000 combines a compact 5-pole angled male header design, through-hole solder mounting, 5 mm pin spacing and robust tin-plated electrical contacts to support reliable PCB-to-wire connectivity, efficient equipment integration and flexible horizontal cable routing.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.