Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.68
The WAGO 231-434/001-000 is a professional 4-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for reliable, detachable electrical connections between printed circuit boards and compatible female pluggable connectors, it combines a 5 mm contact pitch, 1.0 × 1.0 mm square solder pins and a durable grey insulating housing.
Its right-angle construction allows a compatible female connector to mate parallel to the printed circuit board, making it particularly suitable for compact control modules, industrial electronic equipment and applications requiring horizontal cable routing. The four male contacts provide a convenient interface for connecting external wiring to permanently soldered PCB circuits.
With a 12 A IEC rated current, IEC voltage ratings of 320 V or 630 V depending on installation conditions, and a temperature limit range of −60 to +100 °C, the WAGO 231-434/001-000 supports dependable electrical performance in industrial environments. Its tin-plated electrolytic copper contacts, shrouded housing, configurable coding and anti-rotation protection make it a practical choice for modular PCB-to-wire connections.
The WAGO 231-434/001-000 provides a dependable electrical interface for industrial printed circuit boards where horizontal connector mating is required. Its four through-hole solder pins establish permanent connections to the PCB, while the right-angle male header allows compatible female connectors to be attached from the side rather than perpendicular to the board.
The tin-plated electrolytic copper contacts support reliable conductivity and solderability, while the grey PA66 insulating housing maintains separation between the four electrical potentials. The shrouded contact arrangement helps guide the mating connector, and configurable coding fingers support organised connector installation in equipment with multiple similar interfaces.
The connector's 5 mm pitch and compact 23.2 mm width make it suitable for electronic assemblies where PCB space and cable routing are important. Its detachable mating interface also allows wiring harnesses to be removed during maintenance without disturbing the permanent solder joints.
For a complete connection, the header must be paired with a mechanically and electrically compatible female connector. The permissible current and voltage of the assembled connection depend on the mating component, PCB track design, solder joints, ambient temperature and installation conditions.
Safety: The WAGO MCS MIDI Classic system includes connectors without load-breaking capacity. Circuits must be safely isolated before mating or unmating, and equipment should be designed so that accessible male header pins cannot remain live when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Part number | 231-434/001-000 | |
| Product type | Angled THT male PCB header | |
| Manufacturer description | Male header; 4-pole; THT; 1.0 × 1.0 mm solder pin; angled; pin spacing 5 mm; grey | |
| Connector gender | Male | |
| Total electrical potentials | 4 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5 mm | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB termination method | Solder | |
| Header orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° (parallel to PCB surface) | |
| Solder pin arrangement | In-line across the male connector | |
| Solder pins per potential | 1 | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 3.8 mm | |
| PCB drilled-hole diameter | 1.4 mm (+0.1 mm) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (III / 3) | 320 V | |
| Rated voltage (III / 2) | 320 V | |
| Rated voltage (II / 2) | 630 V | |
| Rated impulse voltage (III / 3) | 4 kV | |
| Rated impulse voltage (III / 2) | 4 kV | |
| Rated impulse voltage (II / 2) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 10 A | |
| Connector housing | Shrouded | |
| Mating interface | Compatible female MCS MIDI Classic pluggable connector | |
| Variable connector coding | Yes, using coding fingers | |
| Anti-rotation protection | Yes | |
| Inherent mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Insulation material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 23.2 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 23.2 × 12.2 × 12 mm | |
| Weight | Approximately 1.422 g | |
| GTIN | 4044918866132 | |
| Relevant standards | IEC/EN 61984, IEC/EN 60664-1, UL 1059 and UL 1977 | |
| RoHS compliance | RoHS compliant | |
| Country of origin | Poland |
The WAGO 231-434/001-000 is a 4-pole angled THT male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic equipment.
The connector has 4 poles, providing four individual male contact positions arranged in a single row at a 5 mm contact pitch.
It is an angled, right-angle PCB header. Its mating direction is parallel to the PCB surface, making it suitable for horizontal cable routing and compact equipment layouts.
The connector uses through-hole technology (THT). Its square solder pins are inserted into appropriately sized PCB holes and soldered to create permanent electrical connections.
The WAGO 231-434/001-000 has a 12 A IEC rated current. Its IEC rated voltage is 320 V for overvoltage category III, pollution degree 3, and 630 V for overvoltage category II, pollution degree 2. Under UL 1977, it is rated at 10 A and 600 V.
The header uses 1.0 × 1.0 mm square solder pins with a length of 3.8 mm. The specified PCB drilled-hole diameter is 1.4 mm with a +0.1 mm tolerance.
No. The WAGO 231-434/001-000 is a solder-mounted male PCB header, not a conductor-terminating female connector. Compatible female plugs within the MCS MIDI Classic system may use WAGO CAGE CLAMP® spring pressure connection technology.
The connector measures 23.2 mm wide, 12.2 mm high and 12 mm deep. Its height above the PCB surface is 8.4 mm.
The connector has a grey polyamide 66 insulating housing with a UL 94 V-0 flammability classification.
No. The WAGO MCS MIDI Classic connector system is not intended for load-breaking operation. The circuit must be safely isolated before mating or unmating, and accessible male contacts must not remain live when disconnected.
WAGO MCS MIDI Classic connectors provide dependable, modular electrical connections for industrial electronics and automation equipment. The WAGO 231-434/001-000 combines a compact 4-pole right-angle THT male header, 5 mm contact pitch, 12 A IEC current rating and tin-plated electrolytic copper contacts to support reliable PCB-to-wire connections in professional control systems and electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.