Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.3315
The WAGO 231-432/001-000 is a professional 2-pole angled male PCB header designed for dependable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 5 mm contact pitch, 1.0 × 1.0 mm square solder pins and a compact grey insulating housing.
Designed for right-angle through-hole PCB mounting, the WAGO 231-432/001-000 allows a compatible female connector to mate parallel to the printed circuit board. This arrangement is particularly useful for electronic equipment where wiring must approach from the side rather than directly above the PCB.
With a 12 A IEC rated current, a four-sided shrouded contact interface and durable polyamide insulation, this WAGO connector provides a practical solution for modular industrial electronics, control systems and wire-to-board applications requiring reliable two-position connectivity.
The WAGO 231-432/001-000 provides a reliable connection between a printed circuit board and a compatible pluggable female connector. Its angled solder pins are installed through prepared PCB holes and soldered to establish permanent electrical and mechanical connections.
Unlike straight PCB headers that are designed for mating perpendicular to the circuit board, this right-angle male header provides a 0° mating direction relative to the PCB. This enables the female connector and attached wiring to approach horizontally, which can help accommodate enclosure layouts where vertical clearance is limited.
The 5 mm contact pitch provides a compact arrangement for two separate electrical potentials. Its 1.0 × 1.0 mm square solder pins offer a practical through-hole termination interface for industrial PCB assemblies.
The four-sided shrouded housing helps protect the male contacts and guide the mating connector during installation. Integrated coding fingers can support connection identification when used with suitable mating components, although the connector itself is not specified as providing mismating protection.
The tin-plated electrolytic copper contacts support reliable electrical conductivity, while the grey PA66 insulating housing provides mechanical protection and electrical insulation. Its UL 94 V-0 flammability classification makes the housing suitable for appropriately designed industrial electrical equipment.
Important termination distinction: The WAGO 231-432/001-000 is a male PCB header with solder termination. It does not use CAGE CLAMP® technology to terminate conductors directly. Compatible female cable connectors within the WAGO MCS MIDI Classic system may use spring pressure conductor termination.
Installation and safety: Select the PCB footprint, drilled hole dimensions and soldering process according to the manufacturer's technical drawings. The WAGO MCS connection system does not provide load-breaking capability, so connectors must not be mated or unmated while energised or under load. Circuit design must prevent accessible male header contacts from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-432/001-000 | |
| EAN / GTIN | 4044918866040 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | Male PCB header | |
| Connector configuration | Angled / right-angle | |
| Connector gender | Male | |
| Number of contacts | 2 | |
| Number of potentials | 2 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Right-angle / horizontal | |
| Mating direction relative to PCB | 0° | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Housing configuration | Four-sided shrouded | |
| Connector coding | Coding fingers | |
| Mismating protection | No | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Width | 13.2 mm | |
| Height | 10.8 mm | |
| Height above PCB | 8.4 mm | |
| Depth | 12 mm | |
| Relevant standards | IEC/EN 61984 and applicable UL/CSA requirements |
The WAGO 231-432/001-000 is a 2-pole right-angle male PCB header from the WAGO MCS MIDI Classic 231 Series, featuring 5 mm contact pitch and through-hole solder termination.
The connector has 2 poles, providing two separate electrical contact positions with a 5 mm pitch.
The WAGO 231-432/001-000 is an angled, right-angle male PCB header. Its mating direction is parallel to the printed circuit board.
The connector has a 12 A IEC rated current and a 10 A UL rated current under applicable approval conditions. The permissible current of the complete connection depends on the mating connector, PCB design and installation conditions.
The WAGO 231-432/001-000 has a 5 mm contact pitch. This should not be confused with 5.08 mm pitch variants, which may require different PCB footprints and mating components.
The connector uses through-hole technology (THT). Its angled solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections.
No. The male PCB header uses solder termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination.
The WAGO 231-432/001-000 has a grey insulating housing made from polyamide 66 (PA66).
The connector measures 13.2 mm wide, 10.8 mm high and 12 mm deep, with a height of 8.4 mm above the PCB surface.
No. The connector must not be mated or unmated while energised or under load. The electrical circuit must be safely isolated before connection or disconnection, and accessible header pins must not remain live when unmated.
WAGO MCS MIDI Classic PCB headers combine durable through-hole solder termination, practical pluggable connectivity and robust insulating materials, helping engineers and equipment manufacturers create organised, reliable and service-friendly electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.