Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.67
The WAGO 231-374/001-000 is a 14-pole straight through-hole technology (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for printed circuit board applications, it provides a detachable electrical interface between industrial electronic assemblies and compatible female pluggable connectors.
Featuring a 5.08 mm contact pitch, 14 male contacts and 1.2 × 1.2 mm straight solder pins, the WAGO 231-374/001-000 supports vertical PCB mounting. Its four-sided shrouded housing helps guide the mating connector, while the through-hole solder termination provides a secure electrical connection to the printed circuit board.
With an IEC rated current of 16 A, tin-plated electrolytic copper contacts and an orange polyamide 66 housing, this PCB header is suitable for industrial control electronics, automation equipment and OEM circuit board assemblies. Its pluggable design supports convenient equipment assembly, servicing and replacement by allowing compatible wiring connectors to be detached from the PCB.
The WAGO 231-374/001-000 provides a practical solution for connecting printed circuit boards to external electrical wiring through compatible female pluggable connectors. Its 14-pole configuration allows multiple electrical circuits to be connected through one detachable interface, helping simplify PCB assembly, equipment commissioning and maintenance.
The 1.2 × 1.2 mm solder pins support mechanical stability, while the four-sided shrouded housing helps guide the mating connector. Integrated coding fingers support connector identification and compatible coding arrangements. These characteristics make the WAGO 231-374/001-000 suitable for industrial controllers, machine electronics, automation interfaces and OEM equipment.
Important installation note: WAGO MCS connectors should not be used as load-breaking devices. Connections and disconnections must follow the manufacturer's electrical safety instructions, and circuit designs should prevent accessible male contacts from presenting an electrical hazard when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 14 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-374/001-000 | |
| Product type | Straight THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 14 | |
| Number of levels | 1 | |
| Contact arrangement | Single row | |
| Contact pitch | 5.08 mm | |
| Termination technology | Through-hole soldering (THT) | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin orientation | Straight | |
| Solder pin length | 5 mm | |
| PCB drill hole diameter | 1.7 mm (+0.1 mm tolerance) | |
| Solder pins per potential | 1 | |
| PCB mounting orientation | Vertical | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, category III / pollution degree 3) | 250 V | |
| Rated voltage (IEC, category III / pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Mounting type | PCB through-hole mounting | |
| Connector housing | Four-sided shrouded male header | |
| Mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact finish | Tin-plated | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Width | 74.24 mm | |
| Overall height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | 5.33 g | |
| GTIN | 4044918929905 | |
| Manufacturer packaging unit | 50 pieces |
The WAGO 231-374/001-000 is a 14-pole straight THT male PCB header designed to provide a detachable electrical interface between printed circuit boards and compatible female pluggable connectors in industrial electronic equipment.
The header has 14 male contact positions arranged in a single row with a 5.08 mm contact pitch.
The header is designed for vertical through-hole PCB mounting. It features straight 1.2 × 1.2 mm solder pins with a 5 mm pin length. The specified PCB drill hole diameter is 1.7 mm with a +0.1 mm tolerance.
The header has an IEC rated current of 16 A. Its IEC rated voltage is 250 V under overvoltage category III and pollution degree 3, 320 V under category III and pollution degree 2, and 630 V under category II and pollution degree 2. UL 1977 ratings are 600 V and 15 A. The applicable rating depends on the relevant standard and installation conditions.
No. The WAGO MCS connector system is not designed for load breaking. Connections should only be made or separated under electrically safe conditions, and the circuit should be designed so that exposed male header pins are not hazardous when unmated.
WAGO MCS MIDI Classic PCB connectors provide dependable pluggable interfaces for industrial electronic assemblies. Featuring 14 contact positions, a 5.08 mm pitch, robust 1.2 × 1.2 mm straight THT solder pins and a 16 A IEC current rating, the WAGO 231-374/001-000 offers a practical connection solution for PCB designers, automation engineers, control equipment manufacturers and OEM electronics specialists.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.