Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.31
The WAGO 231-372/001-000 is a professional 12-pole male PCB header designed for dependable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO 231 Series MCS MIDI Classic connection system, this connector features 1.2 × 1.2 mm square solder pins, a 5.08 mm contact pitch and a straight through-hole mounting configuration.
Designed for reliable wire-to-board connectivity, the WAGO 231-372/001-000 provides a permanent soldered connection to a printed circuit board while allowing a compatible female connector to be plugged into the male header. Its four-sided shrouded housing helps protect the contact interface and guide mating connectors into position.
With a 16 A IEC rated current, a 250 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions and a durable orange polyamide housing, this 12-position PCB connector is suitable for industrial equipment requiring secure, organised and service-friendly electrical interfaces.
The WAGO 231-372/001-000 provides a dependable electrical interface between a printed circuit board and a compatible pluggable female connector. Its twelve straight solder pins are inserted into prepared PCB holes and soldered into position, establishing permanent electrical and mechanical connections to the circuit board.
A distinguishing feature of this model is its 1.2 × 1.2 mm square solder pin construction. These pins provide a robust PCB termination interface and support a 16 A IEC rated current under the manufacturer's specified conditions. This makes the connector suitable for industrial electronic equipment requiring reliable multi-pole connections.
Unlike compatible female cable connectors that may use WAGO CAGE CLAMP® spring pressure technology for conductor termination, the 231-372/001-000 male header uses solder termination. The header remains permanently mounted to the PCB while the female connector provides the detachable wiring interface.
The 5.08 mm contact pitch offers a practical balance between connection density and electrical separation. With twelve contact positions, the connector can accommodate multiple power or control circuits through a single organised interface, helping simplify PCB assembly and equipment wiring.
Its four-sided shrouded housing surrounds the male contacts and helps guide compatible female connectors into position. Integrated coding fingers support connector identification and configuration, helping designers distinguish connection points in equipment containing several similar pluggable interfaces.
The tin-plated electrolytic copper contacts provide reliable electrical conductivity, while the flame-retardant polyamide housing offers insulation and mechanical protection. The specified -60 to +100 °C operating temperature range supports demanding industrial environments when the connector is used within the manufacturer's operating conditions.
The 12-pole configuration is particularly useful for equipment requiring several electrical connections between a PCB and an external wiring assembly. Grouping these connections into one detachable interface can help simplify installation, improve wiring organisation and facilitate maintenance.
Important installation information: The WAGO 231-372/001-000 must be installed using a PCB footprint and soldering process appropriate for its 1.2 × 1.2 mm solder pins. The WAGO MCS connection system does not provide load-breaking capability, so connectors must not be mated or unmated while energised or under load. The circuit design must also prevent accessible male header contacts from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-372/001-000 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | Male PCB header | |
| Connector configuration | Straight, four-sided shrouded male header | |
| Connector gender | Male | |
| Number of contacts | 12 | |
| Number of rows | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 250 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin length | 5 mm | |
| Solder pin arrangement | In-line | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide (PA66) | |
| Housing configuration | Four-sided shrouded | |
| Connector coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Contact span | 55.88 mm between first and last contact centres | |
| Overall header length | 64.08 mm, calculated from the manufacturer's dimensional formula | |
| Housing depth | 8.4 mm | |
| Standards and approvals | IEC/EN 61984, UL 1059 and UL 1977 | |
| RoHS compliance | Compliant |
The WAGO 231-372/001-000 is a 12-pole male PCB header used to create detachable wire-to-board electrical connections in industrial electronic equipment, automation systems and control assemblies.
The connector features 12 poles, providing twelve male contacts arranged in a single row at a 5.08 mm pitch.
The connector has a rated current of 16 A under applicable IEC conditions. Under UL 1059, it is rated at 15 A for Use Group B and 10 A for Use Group D. The permissible current of the completed connection depends on the mating connector, PCB design and installation conditions.
The connector is rated at 250 V under IEC overvoltage category III, pollution degree 3 conditions, 320 V under category III, pollution degree 2 conditions and 630 V under category II, pollution degree 2 conditions.
The connector uses through-hole technology (THT). Its straight solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections to the circuit board.
The connector features 1.2 × 1.2 mm square solder pins with a 5 mm pin length. The PCB footprint and drilled hole dimensions must follow the manufacturer's specifications.
The WAGO 231-372/001-000 uses 1.2 × 1.2 mm square solder pins and supports a 16 A IEC rated current. Smaller-pin variants within the connection system may have different current ratings and PCB footprint requirements, so the exact manufacturer specifications must be checked before substitution.
No. The male PCB header uses solder termination to connect directly to the circuit board. CAGE CLAMP® spring pressure wire termination is available on compatible female cable connectors within the WAGO MCS MIDI Classic connection system.
The connector has an overall length of 64.08 mm, calculated using the manufacturer's dimensional formula. The distance between the first and last contact centres is 55.88 mm.
No. The connector must not be mated or unmated while energised or under load. The connected electrical circuit must be safely isolated before connecting or disconnecting the mating connector. Accessible header pins must not remain live when the connector is unmated.
WAGO MCS MIDI Classic PCB headers combine robust through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping electrical engineers, machine builders and automation specialists create secure, organised and maintenance-friendly electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.