Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-370/001-000 is a robust 10-pole male PCB header designed for dependable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO 231 Series MCS MIDI Classic connection system, this connector features 1.2 × 1.2 mm square solder pins, a 5.08 mm contact pitch and a straight through-hole mounting configuration.
Engineered for reliable wire-to-board connectivity, the WAGO 231-370/001-000 provides a permanent soldered connection to the PCB while allowing a compatible female connector to be plugged into the male header. Its four-sided shrouded housing helps protect the contacts and guide the mating connector into position, making it suitable for modular industrial electronics and control systems.
With a 16 A IEC rated current, 250 V rated voltage under IEC overvoltage category III, pollution degree 3 conditions and a durable orange PA66 polyamide housing, this 10-position PCB connector is particularly suitable for industrial equipment requiring secure, organised and maintenance-friendly electrical interfaces.
The WAGO 231-370/001-000 is designed to provide a dependable electrical interface between a printed circuit board and a compatible pluggable female connector. Its ten straight solder pins are inserted into prepared PCB holes and soldered into position, establishing permanent electrical connections to the circuit board.
A distinguishing feature of this model is its 1.2 × 1.2 mm square solder pin construction. These larger solder pins provide additional mechanical stability and support a 16 A nominal current rating under applicable IEC conditions. This makes the connector a practical choice for industrial equipment requiring robust PCB connections.
Unlike compatible female cable connectors that may use WAGO CAGE CLAMP® spring pressure technology for conductor termination, the 231-370/001-000 male header uses solder termination. The header remains permanently mounted to the PCB while the female connector provides the detachable wiring interface.
The 5.08 mm contact pitch offers a balance between connection density and electrical separation. With ten contact positions, the connector can accommodate multiple power or control circuits through one organised interface, helping simplify equipment wiring and PCB assembly.
Its four-sided shrouded housing surrounds the male contacts and helps guide compatible female connectors into position. Integrated coding fingers support connector identification and configuration, helping designers distinguish similar connection points in equipment containing multiple pluggable interfaces.
The tin-plated electrolytic copper contacts provide reliable conductivity, while the flame-retardant PA66 housing offers electrical insulation and mechanical protection. The connector's -60 to +100 °C operating temperature range supports use in demanding industrial environments when installed within the manufacturer's specified conditions.
The 10-pole arrangement is particularly useful for electronic equipment requiring several electrical connections between a PCB and an external cable assembly. By grouping these connections into a single pluggable interface, the header can simplify equipment assembly and facilitate servicing or replacement of electronic modules.
Important installation information: The WAGO 231-370/001-000 must be installed using a suitable PCB footprint and soldering process. The manufacturer specifies 1.2 × 1.2 mm solder pins and a 1.7 mm drilled PCB hole diameter with +0.1 mm tolerance. The WAGO MCS connection system does not have load-breaking capability, so connectors must not be mated or unmated while energised or under load. Circuit design must also ensure that accessible male header contacts are not live when unmated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-370/001-000 | |
| GTIN / EAN | 4044918929752 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | Male PCB header | |
| Connector configuration | Straight, four-sided shrouded male header | |
| Connector gender | Male / plug | |
| Number of contacts | 10 | |
| Number of potentials | 10 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 250 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin length | 5 mm | |
| Recommended drilled PCB hole diameter | 1.7 mm (+0.1 mm tolerance) | |
| Solder pin arrangement | In-line | |
| Solder pins per potential | 1 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Housing configuration | Four-sided shrouded | |
| Connector coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Width | 53.92 mm | |
| Height | 17 mm | |
| Height above PCB | 12 mm | |
| Depth | 8.4 mm | |
| Contact span | 45.72 mm between the first and last contact centres | |
| Weight | Approximately 3.85 g | |
| Country of origin | Germany | |
| Relevant standards | IEC/EN 61984, UL 1059 and UL 1977 |
The WAGO 231-370/001-000 is a 10-pole male PCB header used to create detachable wire-to-board electrical connections in industrial electronic equipment, automation systems and control assemblies.
The connector features 10 poles, providing ten male contacts arranged in a single row at a 5.08 mm pitch.
The connector has a rated current of 16 A under applicable IEC conditions. Under UL 1059, it is rated at 15 A for Use Group B and 10 A for Use Group D. The permissible current of the completed connection depends on the mating connector, PCB design and installation conditions.
The connector is rated at 250 V under IEC overvoltage category III, pollution degree 3 conditions, 320 V under category III, pollution degree 2 conditions and 630 V under category II, pollution degree 2 conditions.
The connector uses through-hole technology (THT). Its straight solder pins pass through suitable PCB holes and are soldered to establish permanent electrical and mechanical connections to the circuit board.
The connector features 1.2 × 1.2 mm square solder pins with a 5 mm pin length. The recommended drilled PCB hole diameter is 1.7 mm with a +0.1 mm tolerance.
The WAGO 231-370/001-000 uses 1.2 × 1.2 mm square solder pins and supports a 16 A IEC rated current. Smaller-pin variants within the connection system may have different current ratings and PCB footprint requirements, so the exact manufacturer specifications must be checked before substitution.
No. The male PCB header uses solder termination to connect directly to the circuit board. CAGE CLAMP® spring pressure wire termination is available on compatible female cable connectors within the WAGO MCS MIDI Classic connection system.
The connector measures 53.92 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB is 12 mm, and the contact span between the first and last contact centres is 45.72 mm.
No. The connector must not be mated or unmated while energised or under load. The connected electrical circuit must be safely isolated before connecting or disconnecting the mating connector. Accessible header pins must not remain live when the connector is unmated.
WAGO MCS MIDI Classic PCB headers combine robust through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping electrical engineers, machine builders and automation specialists create secure, organised and maintenance-friendly electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.