Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.52
The WAGO 231-368/001-000 is an 8-pole straight through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series, designed to provide reliable, detachable electrical connections between printed circuit boards and compatible female pluggable connectors. Featuring a 5.08 mm contact pitch, robust 1.2 × 1.2 mm square solder pins and an orange insulating housing, this connector is suitable for industrial automation, control electronics, machinery and modular electrical equipment.
Unlike conductor-terminating female connectors, the WAGO 231-368/001-000 is a PCB-mounted male header. Its straight solder pins are installed through the printed circuit board and soldered to create permanent electrical terminations. Compatible female connectors can then be mated and unmated when the circuit is safely isolated, allowing external wiring assemblies to be disconnected without disturbing the PCB solder joints.
The connector offers a 16 A IEC rated current, IEC voltage ratings of 250–630 V depending on overvoltage category and pollution degree, and a temperature limit range of −60 to +100 °C. Its enlarged square solder pins provide greater mechanical stability than smaller contact variants, while the shrouded housing, configurable coding fingers and anti-rotation protection support dependable industrial connector assemblies.
The WAGO 231-368/001-000 provides a robust electrical interface between industrial printed circuit boards and detachable wiring assemblies. Its 1.2 × 1.2 mm square solder pins offer increased contact cross-section and mechanical stability, supporting the header's 16 A IEC current rating when installed within the specified electrical and thermal limits.
Its tin-plated electrolytic copper contacts support reliable electrical conductivity and solderability, while the orange PA66 housing separates the eight contact positions and helps guide compatible female connectors. The straight THT design simplifies integration into PCB layouts requiring a mating direction perpendicular to the board.
With configurable coding fingers and anti-rotation protection, the connector also supports controlled assembly and maintenance of modular electronic systems. For a complete connection, the header must be paired with a mechanically and electrically compatible female connector. The current capacity of the complete assembly depends on the mating connector, PCB track design, solder joints, thermal conditions and installation requirements.
Safety: The WAGO MCS MIDI Classic connector system is not intended for load-breaking operation. Circuits must be safely isolated before mating or unmating, and the design should prevent accessible male header pins from remaining live when disconnected.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Part number | 231-368/001-000 | |
| Product type | Straight THT male PCB header | |
| Manufacturer description | THT male header; 1.2 × 1.2 mm solder pin; straight; 5.08 mm pin spacing; 8-pole; orange | |
| Connector gender | Male | |
| Total electrical potentials | 8 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| PCB connection type | Through-hole technology (THT) | |
| PCB termination method | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin arrangement | In-line across the male connector | |
| Solder pins per potential | 1 | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin length | 5 mm | |
| PCB drilled-hole diameter | 1.7 mm (+0.1 mm) | |
| Rated current (IEC) | 16 A | |
| Rated voltage (III / 3) | 250 V | |
| Rated voltage (III / 2) | 320 V | |
| Rated voltage (II / 2) | 630 V | |
| Rated impulse voltage (III / 3) | 4 kV | |
| Rated impulse voltage (III / 2) | 4 kV | |
| Rated impulse voltage (II / 2) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Connector housing | Shrouded | |
| Mating interface | Compatible female MCS MIDI Classic pluggable connector | |
| Variable connector coding | Yes, using coding fingers | |
| Anti-rotation protection | Yes | |
| Inherent mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Insulation material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 43.76 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Dimensions (W × H × D) | 43.76 × 17 × 8.4 mm | |
| Weight | Approximately 3.1 g | |
| Fire load | 0.047 MJ | |
| GTIN | 4044918929660 | |
| Relevant standards | IEC/EN 61984, IEC/EN 60664-1, UL 1059 and UL 1977 | |
| RoHS compliance | RoHS compliant | |
| Country of origin | Germany |
The WAGO 231-368/001-000 is an 8-pole straight THT male PCB header designed to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic equipment.
The connector has 8 poles, providing eight individual male contact positions in a single row at a 5.08 mm contact pitch.
It is a male PCB header with straight solder pins. It is designed to mate with an electrically and mechanically compatible female connector from the WAGO MCS MIDI Classic system.
The connector uses through-hole technology (THT). Its square solder pins are inserted into appropriately sized holes in the printed circuit board and soldered to form permanent electrical connections.
The WAGO 231-368/001-000 has a 16 A IEC rated current. Its IEC rated voltage is 250 V for overvoltage category III, pollution degree 3, 320 V for category III, pollution degree 2, and 630 V for category II, pollution degree 2.
The header uses 1.2 × 1.2 mm square solder pins with a length of 5 mm. The specified PCB drilled-hole diameter is 1.7 mm with a +0.1 mm tolerance.
Both are 8-pole straight male PCB headers with a 5.08 mm pitch, but the WAGO 231-368/001-000 uses 1.2 × 1.2 mm solder pins, while the 231-338/001-000 uses smaller 1.0 × 1.0 mm solder pins. Their PCB hole requirements and electrical ratings must be checked separately.
No. The WAGO 231-368/001-000 is a solder-mounted male PCB header, not a conductor-terminating female connector. Compatible female plugs in the MCS MIDI Classic system may use WAGO CAGE CLAMP® spring pressure technology.
The connector measures 43.76 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB surface is 12 mm.
No. The MCS MIDI Classic connector system does not have load-breaking capacity. The circuit must be safely isolated before mating or unmating, and exposed male pins must not remain live when disconnected.
WAGO MCS MIDI Classic connectors provide dependable, modular electrical connections for industrial electronics and automation equipment. The WAGO 231-368/001-000 combines an 8-pole straight THT male header, robust 1.2 × 1.2 mm solder pins, a 16 A IEC current rating and tin-plated electrolytic copper contacts to support reliable PCB-to-wire connections in professional control systems and electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.