Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.34
The WAGO 231-367/001-000 is a 7-pole male PCB header designed for dependable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 231 series, this connector features straight 1.2 × 1.2 mm solder pins, a 5.08 mm contact pitch and a durable orange insulating housing.
Designed for through-hole technology (THT), the WAGO 231-367/001-000 provides seven independent electrical contacts in a single-row arrangement. Its robust square solder pins are designed for insertion through prepared PCB holes, creating permanent electrical connections when soldered. The connector's 16 A IEC rated current makes it suitable for industrial power and control applications operating within the specified electrical ratings.
Featuring a four-sided shrouded male interface, tin-plated electrolytic copper contacts and a polyamide 66 insulating housing, this connector offers a practical solution for modular industrial equipment. Its straight solder-pin arrangement provides a vertical mating interface for appropriately selected female connectors from the WAGO MCS MIDI Classic system.
The WAGO 231-367/001-000 provides a robust interface between printed circuit boards and detachable electrical wiring. Its seven straight solder pins are inserted through prepared PCB holes and soldered to establish permanent electrical connections to the circuit board. This construction supports dependable electrical continuity and mechanical stability in industrial electronic assemblies.
A distinguishing feature of this connector is its 1.2 × 1.2 mm square solder-pin design. These pins have a larger cross-section than the 1.0 × 1.0 mm versions available within the same connector family. The WAGO 231-367/001-000 is rated at 16 A under IEC conditions, making it suitable for appropriately designed higher-current PCB interfaces.
The 5.08 mm contact pitch allows seven electrical circuits to be organised within one pluggable connection. When used with a compatible female connector, external wiring can be disconnected for servicing without disturbing the permanent soldered connections on the PCB.
Its four-sided shrouded housing provides a defined mating interface that helps guide the female connector and protect the male contacts from incidental mechanical contact. The tin-plated electrolytic copper contacts support reliable conductivity, while the orange polyamide housing maintains electrical separation between adjacent potentials.
The connector also incorporates coding fingers and anti-rotation protection. Suitable coding arrangements can help distinguish connector positions within equipment containing multiple similar interfaces. Mating connector compatibility should always be confirmed against the relevant WAGO documentation.
The WAGO 231-367/001-000 is a solder-terminated male PCB header, not a conductor-entry terminal block. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology for external conductor termination, but the header itself connects to the PCB through soldering.
The WAGO MCS connection system is not designed for load breaking. Connectors must not be mated or disconnected while live or under load. Equipment design should also prevent accessible male contacts from remaining energised when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 7 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-367/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 7 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact spacing | 5.08 mm | |
| PCB termination | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin orientation | Straight | |
| PCB mounting orientation | Vertical | |
| Mating direction relative to PCB | 90° | |
| Solder-pin cross-section | 1.2 × 1.2 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins | 7 | |
| Solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Specified drilled-hole diameter | 1.7 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 250 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material temperature limits | −60 to +100 °C | |
| Width | 38.68 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 2.8 g | |
| Connector housing | Four-sided shrouded | |
| Coding fingers | Integrated | |
| Anti-rotation protection | Yes | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918929646 | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-367/001-000 is a 7-pole male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female pluggable connector. It is suitable for industrial automation, control electronics and PCB assemblies.
The connector has 7 poles, providing seven individual electrical potentials with a nominal 5.08 mm contact pitch.
The connector features 1.2 × 1.2 mm square solder pins, providing a larger cross-section than the 1.0 × 1.0 mm variants in the same series. This design supports a 16 A IEC rated current and provides robust through-hole PCB termination.
The connector uses through-hole technology (THT). Its straight solder pins are inserted through prepared PCB holes and soldered to the circuit board. The header provides a vertical mating interface.
The connector has 1.2 × 1.2 mm square solder pins with a length of 5 mm. The specified drilled-hole diameter is 1.7 mm with a +0.1 mm tolerance.
The WAGO 231-367/001-000 has an IEC rated current of 16 A. Its IEC voltage ratings are 250 V under overvoltage category III, pollution degree 3 conditions, 320 V under category III, pollution degree 2 conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the complete mating assembly and installation environment.
No. The WAGO 231-367/001-000 is a male PCB header with solder-pin termination. Compatible female connectors may use WAGO CAGE CLAMP® technology for conductor termination, but the header itself is soldered to the PCB.
The connector features an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The insulating material has a UL94 V-0 flammability classification.
Both are 7-pole straight THT male PCB headers with a 5.08 mm pitch. The 231-367/001-000 features 1.2 × 1.2 mm solder pins and a 16 A IEC rated current, while the 231-337/001-000 uses 1.0 × 1.0 mm solder pins and has a lower nominal current rating.
Yes. The connector includes coding fingers for suitable coding arrangements with compatible mating connectors. It also features anti-rotation protection.
No. The connector is not designed for load breaking and must not be connected or disconnected while live or under load. Electrical circuits should be safely isolated before disconnection, and accessible male contacts must not remain energised when unmated.
The WAGO 231-367/001-000 requires a compatible 7-pole female connector with matching 5.08 mm contact spacing, suitable electrical ratings and the appropriate mechanical and coding arrangement within the WAGO MCS MIDI Classic system.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machine building and PCB assembly. Combining robust 1.2 × 1.2 mm THT solder pins, a 16 A IEC rated current, tin-plated copper contacts and a four-sided shrouded housing, the WAGO 231-367/001-000 offers a practical 7-pole male PCB header for professional industrial electronic installations.
Manufacturer reference: WAGO 231-367/001-000 Official Product Information
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.