Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.15
The WAGO 231-366/001-000 is a high-performance 6-pole male PCB header designed for reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the established WAGO MCS MIDI Classic 231 series, this connector features straight 1.2 × 1.2 mm solder pins, a 5.08 mm contact pitch and a durable orange insulating housing.
Designed for through-hole technology (THT), the WAGO 231-366/001-000 provides six independent electrical contacts in a compact, single-row arrangement. Its robust 1.2 × 1.2 mm square solder pins offer greater contact cross-section than the 1.0 × 1.0 mm variants in the same connector family, supporting an increased IEC rated current of 16 A.
The connector features a four-sided shrouded male interface, tin-plated electrolytic copper contacts and a polyamide 66 insulating housing with a UL94 V-0 flammability classification. With straight solder pins for vertical PCB mounting and compatibility with appropriately selected WAGO MCS MIDI Classic female connectors, it is a practical solution for modular industrial equipment requiring secure, serviceable electrical connections.
The WAGO 231-366/001-000 provides a robust electrical interface between printed circuit boards and detachable field wiring. Its six straight solder pins are inserted through prepared PCB holes and soldered to create permanent electrical connections to the board. This construction is particularly useful in industrial electronics where mechanical stability and dependable electrical continuity are essential.
A key advantage of this connector is its 1.2 × 1.2 mm solder-pin design. Compared with the 1.0 × 1.0 mm solder-pin variants in the same product family, the larger pin cross-section supports the connector's 16 A IEC rated current. This makes the WAGO 231-366/001-000 a practical choice for applications requiring a higher-current PCB header within the MCS MIDI Classic system.
The 5.08 mm contact pitch allows six individual electrical circuits to be organised within one pluggable interface. When used with a compatible female connector, external wiring can be disconnected for equipment maintenance or replacement without disturbing the soldered PCB connections.
The connector's four-sided shrouded housing provides a defined mating interface that helps guide the female connector and protect the male contacts against incidental mechanical contact. Tin-plated electrolytic copper contacts support reliable conductivity, while the orange PA66 insulating material maintains separation between adjacent electrical potentials.
The WAGO 231-366/001-000 is a solder-terminated male PCB header, not a conductor-entry terminal block. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology for external conductor termination, but the header itself connects directly to the PCB through soldering.
The MCS MIDI Classic connection system is not intended for load breaking. The connector must not be mated or disconnected while energised or under load. Electrical circuits should be safely isolated before servicing, and the equipment design must prevent accessible male contacts from remaining live when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-366/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 6 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact spacing | 5.08 mm | |
| PCB termination | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin orientation | Straight | |
| PCB mounting orientation | Vertical | |
| Mating direction relative to PCB | 90° | |
| Solder-pin cross-section | 1.2 × 1.2 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins | 6 | |
| Solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Specified drilled-hole diameter | 1.7 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 250 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material temperature limits | −60 to +100 °C | |
| Width | 33.6 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 2.35 g | |
| Connector housing | Four-sided shrouded | |
| GTIN / EAN | 4044918929585 | |
| Country of origin | Germany | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-366/001-000 is a 6-pole male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female pluggable connector. It is suitable for industrial automation, control electronics and PCB assemblies.
The connector has 6 poles, providing six individual electrical potentials with a nominal 5.08 mm contact pitch.
The connector features 1.2 × 1.2 mm square solder pins, which have a larger cross-section than the 1.0 × 1.0 mm variants in the same series. This design supports an increased 16 A IEC rated current and provides a robust soldered connection to the PCB.
The connector uses through-hole technology (THT). Its straight solder pins are inserted through prepared PCB holes and soldered to the circuit board. The header provides a vertical mating interface.
The connector has 1.2 × 1.2 mm square solder pins with a length of 5 mm. The specified drilled-hole diameter is 1.7 mm with a +0.1 mm tolerance.
The WAGO 231-366/001-000 has an IEC rated current of 16 A. Its IEC voltage ratings include 250 V under overvoltage category III, pollution degree 3 conditions, 320 V under category III, pollution degree 2 conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the installation environment and complete mating assembly.
No. The WAGO 231-366/001-000 is a male PCB header with solder-pin termination. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination, but the header itself is soldered to the PCB.
The connector features an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The insulating material has a UL94 V-0 flammability classification.
Both are 6-pole straight THT male PCB headers with a 5.08 mm pitch. The 231-366/001-000 uses 1.2 × 1.2 mm solder pins and has a 16 A IEC rated current, while the 231-336/001-000 uses 1.0 × 1.0 mm solder pins and has a 12 A IEC rated current.
No. The connector is not designed for load breaking and must not be connected or disconnected while live or under load. The electrical circuit should be safely isolated before disconnection, and accessible male contacts must not remain energised when unmated.
The WAGO 231-366/001-000 requires a compatible 6-pole female connector with matching 5.08 mm contact spacing, suitable electrical ratings and an appropriate mechanical and coding arrangement within the WAGO MCS MIDI Classic connection system.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machine building and PCB assembly. Combining robust 1.2 × 1.2 mm THT solder pins, a 16 A IEC rated current, tin-plated copper contacts and a four-sided shrouded housing, the WAGO 231-366/001-000 offers a practical 6-pole male PCB header for professional industrial electronic installations.
Manufacturer reference: WAGO 231-366/001-000 Official Product Information
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.