Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.40
The WAGO 231-350/001-000 is a high-quality 20-pole male PCB header designed for reliable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO 231 Series MCS MIDI Classic connection system, this connector combines a compact, shrouded design with secure through-hole solder termination and a dependable mating interface.
Featuring a 5.08 mm contact pitch, straight solder pins and a durable orange insulating housing, the WAGO 231-350/001-000 provides an efficient solution for connecting compatible female terminal block plugs to printed circuit boards. Its through-hole technology (THT) mounting arrangement establishes a permanent soldered connection to the PCB while allowing the mating connector to be detached during equipment servicing and maintenance.
With a 12 A IEC rated current, 320 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions and robust PA66 polyamide housing, this WAGO male header is particularly suitable for industrial control boards, modular electronic assemblies and machine-building applications requiring organised multi-pole electrical connections.
The WAGO 231-350/001-000 is designed to form the PCB-mounted male half of a modular electrical connection. Its 20 straight solder pins pass through prepared holes in the printed circuit board and are soldered into position, establishing a secure electrical and mechanical connection between the header and the PCB.
Unlike compatible female cable connectors that use WAGO CAGE CLAMP® spring pressure technology for conductor termination, the 231-350/001-000 male header uses solder termination. This allows the header to remain permanently attached to the circuit board while the female connector provides the detachable wiring interface.
The 5.08 mm contact pitch provides an effective balance between connection density and electrical separation. With 20 contact positions, the connector can accommodate numerous electrical circuits through a single organised interface, making it suitable for industrial control signals, power distribution and equipment interconnections within the specified electrical ratings.
Its four-sided shrouded housing surrounds the male contacts and helps guide compatible mating connectors into position. The housing incorporates coding fingers that can be used with suitable mating components to distinguish different connection positions in equipment containing multiple similar connectors.
The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the flame-retardant PA66 housing offers electrical insulation and mechanical protection. The through-hole construction is particularly well suited to industrial PCB assemblies where robust soldered connections and repeatable connector mating are required.
The 20-pole arrangement is beneficial for complex electronic equipment requiring numerous signal or power connections between a printed circuit board and an external wiring harness. By grouping multiple connections into one pluggable interface, the connector can help simplify equipment assembly, improve wiring organisation and reduce maintenance time when electronic modules require replacement.
Important installation information: The WAGO 231-350/001-000 must be installed using a PCB footprint and soldering process appropriate for its specified pin dimensions. Compatible female connectors must be selected according to the WAGO MCS MIDI Classic connection system. These connectors are not designed for mating or unmating while energised or under load. The circuit design must also prevent accessible male header contacts from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 20 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-350/001-000 | |
| GTIN / EAN | 4044918865890 | |
| Series | 231 / MCS MIDI Classic | |
| Product type | Male PCB header | |
| Connector configuration | Straight, shrouded male header | |
| Connector gender | Male / plug | |
| Number of contacts | 20 | |
| Number of potentials | 20 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated voltage (UL 1977) | 600 V | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| PCB contact arrangement | In-line | |
| Solder pins per potential | 1 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Housing configuration | Shrouded on four sides | |
| Connector coding | Coding fingers provided | |
| Anti-rotation protection | Yes | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Width | 104.72 mm | |
| Height | 17 mm | |
| Height above PCB | 12 mm | |
| Depth | 8.4 mm | |
| Contact span | 96.52 mm between the first and last contact centres | |
| Weight | Approximately 6.5 g | |
| Standard packaging quantity | 50 pieces | |
| Relevant standards | IEC/EN 61984, UL 1059 and UL 1977 | |
| RoHS compliance | Compliant |
The WAGO 231-350/001-000 is a 20-pole male PCB header used to create detachable wire-to-board electrical connections in industrial electronic equipment, automation systems and control assemblies.
The connector features 20 poles, providing 20 male contacts arranged in a single row at a 5.08 mm pitch.
It is a male PCB header designed to mate with an appropriately specified female connector from the compatible WAGO MCS MIDI Classic connection system.
The connector uses through-hole technology (THT). Its straight solder pins are inserted into suitable PCB holes and soldered to establish permanent electrical and mechanical connections to the circuit board.
The connector has a rated current of 12 A under applicable IEC conditions and 10 A under applicable UL conditions. The permissible operating current of a complete connection depends on the mating connector, PCB design and installation conditions.
The connector is rated at 320 V under IEC overvoltage category III, pollution degree 3 conditions and 630 V under IEC overvoltage category II, pollution degree 2 conditions. It also has a 4 kV rated impulse withstand voltage under applicable IEC conditions.
The WAGO 231-350/001-000 features 1.0 × 1.0 mm square solder pins with a 5 mm pin length. A suitable PCB footprint must be used according to the manufacturer's dimensional specifications.
No. The male PCB header uses solder termination to connect directly to the circuit board. CAGE CLAMP® spring pressure wire termination is available on compatible female cable connectors within the WAGO MCS MIDI Classic connection system.
The connector measures 104.72 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB is 12 mm, and the contact span between the first and last contact centres is 96.52 mm.
No. The connector must not be mated or unmated while energised or under load. The connected electrical circuit must be safely isolated before connecting or disconnecting the mating connector. Accessible header pins must not remain live when the connector is unmated.
WAGO MCS MIDI Classic PCB headers combine reliable through-hole solder termination, durable insulating materials and practical pluggable connectivity, helping electrical engineers, machine builders and automation specialists create secure, organised and maintenance-friendly electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.