Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.91
The WAGO 231-347/001-000 is a 17-pole male PCB header from the WAGO 231 Series MCS MIDI Classic pluggable connector range. Designed for industrial electronic equipment, control systems and printed circuit board assemblies, this connector features straight through-hole (THT) solder pins, a 5.08 mm contact pitch and a shrouded orange insulating housing.
With an IEC rated current of 12 A and an IEC rated voltage of up to 630 V under the applicable installation conditions, the WAGO 231-347/001-000 provides a practical electrical interface between PCB-mounted circuitry and compatible female pluggable connectors.
The connector incorporates 1.0 × 1.0 mm square solder pins with a 5 mm contact tail length, enabling permanent through-hole solder attachment to a suitably designed PCB. Its single-row, 17-position configuration provides an organised solution for multi-circuit connections in industrial automation, machine control and modular electronic equipment.
Technical selection note: The applicable electrical ratings depend on the complete connector assembly, installation conditions and relevant approval requirements. PCB footprint dimensions, soldering conditions and mating compatibility should be confirmed against WAGO's current technical documentation before installation.
The WAGO 231-347/001-000 provides a dependable electrical interface between printed circuit boards and compatible detachable wiring connectors. Its straight through-hole solder terminals form a permanent electrical and mechanical connection to the PCB when correctly soldered, while the shrouded male interface supports guided connector mating.
The tin-plated electrolytic copper contacts provide conductive mating surfaces, and the polyamide 66 housing provides electrical insulation and mechanical support. Integrated coding fingers and anti-rotation protection help support organised connector arrangements in equipment containing multiple electrical interfaces.
The 17-pole configuration consolidates multiple circuits into a single detachable connection, helping simplify electrical assembly, equipment integration and maintenance. For reliable operation, the header must be installed using the correct PCB footprint and soldering process and paired with a mechanically and electrically compatible female connector.
As the WAGO MCS MIDI Classic system includes connectors without breaking capacity, the connector must not be connected or disconnected while live or under load. Equipment design should also prevent accessible male contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 17 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-347/001-000 | |
| Series | 231 Series – MCS MIDI Classic | |
| Product type | Straight THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 17 | |
| Number of connection levels | 1 | |
| Contact arrangement | Single row | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder pin orientation | Straight | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Contact tail length | 5 mm | |
| Nominal pin spacing | 5.08 mm | |
| Header orientation | Vertical | |
| Mounting type | PCB through-hole | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC) | Up to 630 V, subject to installation conditions | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Connector shrouding | Four-sided | |
| Insulating material | Polyamide 66 (PA66) | |
| Contact material | Electrolytic copper | |
| Contact mating finish | Tin | |
| Material flammability classification | UL 94 V-0 | |
| Temperature range | −60 to +100 °C | |
| Insulation height | 12 mm | |
| Manufacturer catalogue packaging unit | 50 pieces | |
| Applicable connector standards | IEC 61984, EN 61984, UL 1059 and UL 1977, subject to approval conditions |
The WAGO 231-347/001-000 is a 17-pole MCS MIDI Classic male PCB header featuring straight through-hole solder pins and 5.08 mm contact spacing for detachable electrical connections between printed circuit boards and compatible female connectors.
The connector has 17 poles, arranged in a single row with one through-hole solder connection per electrical potential.
The WAGO 231-347/001-000 uses through-hole technology (THT) with straight 1.0 × 1.0 mm square solder pins and a 5 mm contact tail length.
The connector has an IEC rated current of 12 A and an IEC rated voltage of up to 630 V, subject to installation conditions. Its listed UL ratings are 10 A and 600 V, subject to the applicable approval requirements.
The header is designed for compatible 17-pole female connectors from the WAGO MCS MIDI Classic system. The mating connector must match the 5.08 mm contact pitch and mechanical configuration, with final compatibility confirmed using WAGO's manufacturer documentation.
WAGO MCS MIDI Classic connectors provide modular electrical interconnections for industrial electronics, machine building and control equipment. The 231-347/001-000 combines a 17-pole PCB header, straight THT solder terminals and a 5.08 mm contact pitch for organised, serviceable connections between circuit boards and compatible wiring assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.