Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.75
The WAGO 231-346/001-000 is a high-quality 16-pole male PCB header designed for reliable, detachable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the established WAGO MCS MIDI Classic 231 series, this connector features straight through-hole solder pins, a 5.08 mm contact pitch and a durable orange insulating housing.
Designed for through-hole technology (THT), the WAGO 231-346/001-000 provides 16 independent electrical contacts in a single-row arrangement. Its 1 × 1 mm square solder pins extend 5 mm below the connector housing, allowing the header to be soldered securely onto a suitably designed PCB. The straight-pin configuration creates a vertical mating interface for compatible female pluggable connectors.
With an IEC rated current of 12 A, voltage ratings of up to 630 V under specified IEC conditions and tin-plated electrolytic copper contacts, this connector is well suited to industrial electronic equipment. Its four-sided shrouded housing, variable coding capability and anti-rotation protection provide a practical connection solution for modular control systems, OEM machinery and industrial PCB applications.
The WAGO 231-346/001-000 provides a reliable interface between printed circuit boards and detachable electrical wiring. Its 16 straight solder pins are inserted through prepared PCB holes and soldered to establish permanent electrical connections to the board. This mounting method provides a practical combination of electrical continuity and mechanical stability for industrial electronic assemblies.
The connector's 5.08 mm contact pitch enables 16 individual electrical circuits to be arranged within a single pluggable interface. When used with an appropriately selected female connector from the WAGO MCS MIDI Classic system, external wiring can be connected and disconnected without disturbing the soldered PCB terminations.
The four-sided shrouded housing provides a defined mating interface that helps guide the female connector and protect the male contacts from incidental mechanical contact. Its tin-plated electrolytic copper contacts provide reliable conductivity, while the orange polyamide housing maintains separation between adjacent electrical potentials.
The WAGO 231-346/001-000 also features variable coding capability and anti-rotation protection. Compatible coding components can help distinguish connector positions in assemblies containing multiple similar interfaces. However, the connector does not have a dedicated locking mechanism, so applications requiring positive mechanical retention should use a suitably specified connector variant or assembly.
This product is a solder-terminated male PCB header, not a conductor-entry terminal block. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology to terminate external wiring, but the male header itself connects to the PCB by soldering.
The MCS MIDI Classic connection system is not designed for load breaking. The connector must not be mated or disconnected while energised or under load. Electrical circuit design should also prevent accessible male contacts from remaining live when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 16 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-346/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 16 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Number of rows | 1 | |
| Contact spacing | 5.08 mm | |
| PCB termination | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin orientation | Straight | |
| PCB mounting orientation | Vertical | |
| Mating direction relative to PCB | 90° | |
| Solder-pin cross-section | 1 × 1 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins | 16 | |
| Solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Specified drilled-hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material temperature limits | −60 to +100 °C | |
| Width | 84.4 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 5.2 g | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Mismating protection | No dedicated mismating protection | |
| Connector locking | No integrated locking mechanism | |
| GTIN / EAN | 4044918865777 | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-346/001-000 is a 16-pole male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female pluggable connector. It is suitable for industrial automation, control electronics and PCB assemblies.
It is a male PCB header with 16 mating contacts. The header is soldered onto a PCB and connects to an appropriately selected female pluggable connector.
The connector has 16 poles, providing 16 individual electrical potentials with a nominal 5.08 mm contact pitch.
The connector uses through-hole technology (THT). Its straight solder pins are inserted through prepared PCB holes and soldered to the circuit board. The header provides a vertical mating interface.
The connector features 1 × 1 mm square solder pins with a length of 5 mm. The specified drilled-hole diameter is 1.4 mm with a +0.1 mm tolerance.
The WAGO 231-346/001-000 has an IEC rated current of 12 A. Its IEC voltage ratings include 320 V under overvoltage category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the installation environment and complete mating assembly.
No. The WAGO 231-346/001-000 is a male PCB header with solder-pin termination. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination, but the header itself is soldered to the PCB.
The connector features an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The insulating material has a UL94 V-0 flammability classification.
Yes. The WAGO 231-346/001-000 supports variable coding when used with compatible coding and mating components. It also features anti-rotation protection.
No. The standard WAGO 231-346/001-000 does not feature an integrated mechanical locking mechanism. Applications requiring additional connector retention should use a suitable mating arrangement or a connector variant designed for positive locking.
No. The connector is not designed for load breaking and must not be connected or disconnected while live or under load. The electrical circuit should be safely isolated before disconnection, and accessible male contacts must not remain energised when unmated.
The WAGO 231-346/001-000 requires a compatible 16-pole female connector with matching 5.08 mm contact spacing, suitable electrical ratings and an appropriate mechanical and coding arrangement within the WAGO MCS MIDI Classic connection system.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machine building and PCB assembly. Combining straight THT solder pins, tin-plated copper contacts, a four-sided shrouded housing and a compact 16-pole configuration, the WAGO 231-346/001-000 offers a practical male PCB header for professional industrial electronic installations.
Manufacturer reference: WAGO 231-346/001-000 Official Product Information
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.