Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.44
The WAGO 231-345/108-000 is a 15-pole male PCB header with straight through-hole solder pins and a threaded flange, designed for reliable pluggable electrical connections in industrial automation, control electronics and machinery. Part of the established WAGO MCS MIDI Classic 231 series, this orange connector combines a 5.08 mm contact pitch with a secure mechanical mating arrangement for professional PCB installations.
Featuring 15 individual electrical contacts, the WAGO 231-345/108-000 provides an organised connection interface between a printed circuit board and a compatible female pluggable connector. Its 1 × 1 mm straight solder pins are designed for through-hole technology (THT), while the threaded flange supports a secure locking connection when used with the appropriate mating connector and fastening arrangement.
With an IEC rated current of 12 A and voltage ratings of 320 V or 630 V, depending on installation conditions, this connector is suitable for a wide range of industrial electronic applications. Its tin-plated electrolytic copper contacts, orange polyamide 66 housing and coding features make it a practical choice for PCB-mounted control, power distribution and signal interface assemblies operating within the specified electrical ratings.
The WAGO 231-345/108-000 combines the convenience of a detachable electrical connector with the mechanical stability of a threaded flange arrangement. This feature supports secure engagement with appropriately selected female connectors, making the header particularly useful in industrial equipment where reliable mating and resistance to accidental disconnection are important.
Its straight through-hole solder pins are inserted into prepared PCB holes and soldered to establish permanent electrical connections to the circuit board. The 5.08 mm pitch provides an organised arrangement of 15 electrical contacts, allowing multiple circuits to be connected through one compact PCB-mounted interface.
The tin-plated electrolytic copper contacts provide a conductive mating interface, while the orange PA66 housing helps maintain contact alignment and electrical separation. Coding fingers support compatible coding arrangements, helping distinguish connector positions in electrical equipment containing several similar interfaces.
The WAGO 231-345/108-000 is a solder-terminated male PCB header, not a wire-entry terminal block. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology to terminate external conductors, but the male header itself is connected to the PCB by soldering.
As part of the WAGO MCS MIDI Classic connection system, this connector is not designed for load breaking. It must not be mated or disconnected while live or under load. Circuit design should also ensure that accessible male contacts cannot remain energised when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 15 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-345/108-000 | |
| Product type | THT male PCB header with threaded flange | |
| Connector gender | Male | |
| Number of potentials | 15 | |
| Number of levels | 1 | |
| Contact spacing | 5.08 mm | |
| PCB termination | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin orientation | Straight | |
| PCB mounting orientation | Vertical | |
| Mating direction relative to PCB | 90° | |
| Connector locking | Threaded flange | |
| Solder-pin cross-section | 1 × 1 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins | 15 | |
| Solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Recommended drilled-hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL 1059, Use Groups B and D) | 10 A | |
| Rated voltage (UL 1059, Use Groups B and D) | 300 V | |
| Rated current (UL 1977, factory wiring) | 10 A | |
| Rated voltage (UL 1977, factory wiring) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material temperature limits | −60 to +100 °C | |
| Width | 86.2 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 5.61 g | |
| Coding fingers | Integrated | |
| GTIN / EAN | 4044918865753 | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-345/108-000 is a 15-pole male PCB header with straight through-hole solder pins and a threaded flange. It is used to create secure, detachable electrical connections between printed circuit boards and compatible female connectors in industrial electronic equipment.
The connector has 15 poles, providing 15 individual electrical potentials with a nominal 5.08 mm contact pitch.
The threaded flange provides a mechanical locking interface for compatible mating connector assemblies. It helps secure the connection and reduce the risk of unintended separation during equipment operation.
The connector uses through-hole technology (THT). Its straight solder pins are inserted through prepared PCB holes and soldered to the circuit board. The header is designed for vertical mounting.
The connector features 1 × 1 mm square solder pins with a length of 5 mm. The specified drilled-hole diameter is 1.4 mm with a +0.1 mm tolerance.
The WAGO 231-345/108-000 has an IEC rated current of 12 A. Its IEC voltage ratings include 320 V under overvoltage category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the complete mating assembly and installation environment.
No. The WAGO 231-345/108-000 is a male PCB header with solder-pin termination. Compatible female connectors may use WAGO CAGE CLAMP® technology for conductor termination, but the header itself is soldered to the PCB.
The connector features an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The insulating material has a UL94 V-0 flammability classification.
Yes. The WAGO 231-345/108-000 includes coding fingers that support suitable coding arrangements with compatible mating connectors, helping distinguish connection positions in multi-connector assemblies.
No. The connector is not designed for load breaking and must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before disconnection, and accessible male contacts must not remain energised when unmated.
The WAGO 231-345/108-000 requires a compatible 15-pole female connector with matching 5.08 mm contact spacing, suitable electrical ratings and a mechanical arrangement compatible with its threaded flange. Coding and locking requirements must also be considered.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machine building and PCB assembly. Combining straight THT solder pins, tin-plated copper contacts and threaded flange locking, the WAGO 231-345/108-000 offers a practical 15-pole male PCB header for secure and serviceable industrial electronic connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.