Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.58
The WAGO 231-345/001-000 is a professional 15-pole straight THT male PCB header from the WAGO MCS MIDI Classic 231 Series, designed to provide reliable, detachable electrical connections between printed circuit boards and compatible pluggable connectors. Featuring a 5.08 mm contact pitch, 1.0 × 1.0 mm square solder pins and a durable orange insulating housing, this connector is an effective solution for industrial automation, control electronics and machine-building applications.
The WAGO 231-345/001-000 uses through-hole technology (THT), allowing its straight male contacts to be soldered directly into a printed circuit board. This creates a permanent PCB termination and a detachable mating interface for compatible female connectors, simplifying equipment installation, maintenance and replacement without disturbing the soldered connections.
With a 12 A IEC rated current, IEC voltage ratings of 320 V or 630 V depending on installation conditions, and a temperature limit range of −60 to +100 °C, this 15-pole PCB header provides dependable electrical performance for demanding industrial applications. Its tin-plated electrolytic copper contacts, polyamide 66 housing and anti-rotation protection support reliable integration into professional electronic assemblies.
The WAGO 231-345/001-000 is engineered to provide a dependable electrical interface between printed circuit boards and detachable wiring assemblies. Its 15 straight through-hole solder pins form permanent connections to the PCB, while the male mating contacts allow compatible female connectors to be attached or removed when the circuit is safely isolated.
The tin-plated electrolytic copper contacts provide reliable conductivity and solderability, while the orange PA66 housing maintains separation between adjacent electrical potentials. The single-row, 5.08 mm pitch arrangement simplifies PCB layout and supports standardised mating within the MCS MIDI Classic system. Anti-rotation protection and configurable coding further assist with connector alignment and correct assembly.
For a complete electrical connection, the header must be used with a mechanically and electrically compatible WAGO female connector. The permissible operating current and voltage must account for the mating component, PCB track capacity, solder joints and installation environment. The connector system is not designed for connection or disconnection under electrical load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 15 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Part number | 231-345/001-000 | |
| Product type | Straight THT male PCB header | |
| Manufacturer description | THT male header; 1.0 × 1.0 mm solder pin; straight; 5.08 mm pin spacing; 15-pole; orange | |
| Connector gender | Male | |
| Total electrical potentials | 15 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB termination | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin arrangement | In-line across the male connector | |
| Solder pins per potential | 1 | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| PCB drilled-hole diameter | 1.4 mm (+0.1 mm) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (III / 3) | 320 V | |
| Rated voltage (III / 2) | 320 V | |
| Rated voltage (II / 2) | 630 V | |
| Rated impulse voltage (III / 3) | 4 kV | |
| Rated impulse voltage (III / 2) | 4 kV | |
| Rated impulse voltage (II / 2) | 4 kV | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 10 A | |
| Connector housing | Shrouded | |
| Mating interface | Compatible female MCS MIDI Classic pluggable connector | |
| Variable connector coding | Yes | |
| Anti-rotation protection | Yes | |
| Inherent mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Insulation material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 79.32 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Dimensions (W × H × D) | 79.32 × 17 × 8.4 mm | |
| Weight | Approximately 4.72 g | |
| Fire load | 0.084 MJ | |
| GTIN | 4044918865722 | |
| Relevant standards | IEC/EN 61984, UL 1059, UL 1977 and applicable CSA requirements | |
| RoHS compliance | RoHS compliant | |
| Country of origin | Poland |
The WAGO 231-345/001-000 is a 15-pole male through-hole PCB header used to provide detachable electrical connections between printed circuit boards and compatible female pluggable connectors in industrial automation and electronic equipment.
The connector has 15 poles, providing 15 individual male contact positions in a single row at a 5.08 mm contact pitch.
It is a male PCB header with straight solder pins. It mates with an electrically and mechanically compatible female connector from the WAGO MCS MIDI Classic system.
The connector uses through-hole technology (THT). Its square solder pins pass through appropriately sized PCB holes and are soldered to the printed circuit board.
The WAGO 231-345/001-000 has a 12 A IEC rated current. Its IEC rated voltage is 320 V for overvoltage category III, pollution degree 3, and 630 V for overvoltage category II, pollution degree 2. Under UL 1977, it is rated at 10 A and 600 V.
The header has 1.0 × 1.0 mm square solder pins with a length of 5 mm. The specified PCB drilled-hole diameter is 1.4 mm with a +0.1 mm tolerance.
No. The WAGO 231-345/001-000 is a solder-mounted male PCB header, not a conductor-terminating female connector. Compatible female plugs within the MCS MIDI Classic system may use WAGO CAGE CLAMP® spring pressure technology.
The header measures 79.32 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB surface is 12 mm.
The specified temperature limit range is −60 to +100 °C. The permissible operating conditions of the complete assembly must also account for the mating connector, PCB and surrounding equipment.
No. The WAGO MCS MIDI Classic connector system is not intended for load-breaking operation. The electrical circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide dependable, modular electrical connections for industrial electronics and automation equipment. The WAGO 231-345/001-000 combines a 15-pole straight THT male header, 5.08 mm contact pitch, tin-plated electrolytic copper contacts and robust polyamide insulation to support reliable PCB-to-wire connections in professional control systems and electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.