Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.41
The WAGO 231-344/001-000 is a 14-pole straight THT male PCB header from the WAGO MCS MIDI Classic 231 Series, designed to provide reliable, detachable electrical connections between printed circuit boards and compatible pluggable connectors. Featuring a 5.08 mm contact pitch, straight 1.0 × 1.0 mm solder pins and a robust orange insulating housing, this connector is suitable for industrial automation, control electronics and machine-building applications.
Unlike the female CAGE CLAMP® connectors within the MCS MIDI Classic system, the WAGO 231-344/001-000 is a male through-hole PCB header. Its contacts are soldered directly into a printed circuit board, creating a fixed interface that accepts an appropriately matched female connector. This arrangement allows external wiring harnesses to be disconnected from electronic assemblies without disturbing the permanent PCB solder connections.
The header offers a 12 A IEC rated current, IEC voltage ratings up to 630 V under specified installation conditions and an operating temperature limit range of −60 to +100 °C. With configurable coding, anti-rotation protection and tin-plated electrolytic copper contacts, it provides a practical solution for dependable PCB-to-wire connections in professional industrial equipment.
The WAGO 231-344/001-000 provides a robust PCB-mounted connection interface for industrial electrical and electronic equipment. Its through-hole solder pins create permanent electrical connections to the printed circuit board, while the pluggable male contact arrangement allows compatible female connectors to be attached and removed during installation or maintenance.
The header's tin-plated electrolytic copper contacts support reliable conductivity, while the PA66 insulating housing provides electrical separation between the 14 contact positions. Variable coding and anti-rotation protection further support controlled connector assembly. The straight orientation makes the header suitable for PCB layouts requiring a mating direction perpendicular to the board surface.
For a complete connection, the WAGO 231-344/001-000 must be combined with an electrically and mechanically compatible female connector. The mating connector, PCB conductor tracks, solder joints and installation conditions must all be considered when determining the permissible operating current and voltage. This connector is not intended for mating or unmating while live or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 14 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Part number | 231-344/001-000 | |
| Product type | THT male PCB header | |
| Manufacturer description | THT male header; 1.0 × 1.0 mm solder pin; straight; 5.08 mm pitch; 14-pole; orange | |
| Connector gender | Male | |
| Total electrical potentials | 14 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5.08 mm | |
| PCB mounting technology | Through-hole technology (THT) | |
| PCB termination | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin arrangement | In-line across the male connector | |
| Solder pins per potential | 1 | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| PCB drilled-hole diameter | 1.4 mm (+0.1 mm) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (III / 3) | 320 V | |
| Rated voltage (III / 2) | 320 V | |
| Rated voltage (II / 2) | 630 V | |
| Rated impulse voltage (III / 3) | 4 kV | |
| Rated impulse voltage (III / 2) | 4 kV | |
| Rated impulse voltage (II / 2) | 4 kV | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Connection interface | Compatible female pluggable connector | |
| Variable connector coding | Yes | |
| Anti-rotation protection | Yes | |
| Inherent mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Insulation material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 74.24 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Dimensions (W × H × D) | 74.24 × 17 × 8.4 mm | |
| Weight | Approximately 4.5 g | |
| Fire load | 0.081 MJ | |
| GTIN | 4044918865692 | |
| Relevant standards | IEC/EN 61984, UL 1059, UL 1977 and applicable CSA requirements | |
| RoHS compliance | RoHS compliant |
The WAGO 231-344/001-000 is a 14-pole male through-hole PCB header used to create detachable connections between printed circuit boards and compatible female pluggable connectors in industrial automation and electronic equipment.
The connector has 14 poles, with 14 individual male contact positions arranged in a single row at a 5.08 mm pitch.
It is a male PCB header with straight solder pins. It is designed to mate with a compatible female connector from the WAGO MCS MIDI Classic system.
The connector uses through-hole technology (THT). Its 1.0 × 1.0 mm square solder pins are inserted into appropriately sized PCB holes and soldered to the board.
The WAGO 231-344/001-000 has a 12 A IEC rated current. Its IEC rated voltage is 320 V under overvoltage category III, pollution degree 3, and 630 V under overvoltage category II, pollution degree 2. Its UL 1977 rating is 10 A at 600 V.
The header uses 1.0 × 1.0 mm square solder pins with a length of 5 mm. The specified PCB drilled-hole diameter is 1.4 mm with a +0.1 mm tolerance.
No. The WAGO 231-344/001-000 is a solder-mounted male PCB header, not a conductor-terminating female connector. Compatible female plugs in the MCS MIDI Classic system may use CAGE CLAMP® spring pressure technology.
The header measures 74.24 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB surface is 12 mm.
The specified temperature limit range is −60 to +100 °C. Actual operating conditions must also comply with the ratings of the mating connector, PCB and surrounding equipment.
No. The WAGO MCS MIDI Classic connector system is not intended for load-breaking operation. The circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide dependable, modular electrical connections for industrial electronics and automation equipment. The WAGO 231-344/001-000 combines a 14-pole straight THT male header, 5.08 mm contact pitch, tin-plated copper contacts and configurable coding to support reliable PCB-to-wire connections in professional control systems and electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.