Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.03
The WAGO 231-342/001-000 is a high-quality 12-pole straight through-hole (THT) male PCB header from the established WAGO MCS MIDI Classic 231 Series. Designed for reliable printed circuit board connections, this connector provides a detachable electrical interface between industrial electronic equipment and compatible female cable connectors.
Featuring a 5.08 mm pin spacing, 1 × 1 mm square solder pins and a durable orange polyamide 66 housing, the WAGO 231-342/001-000 is suitable for industrial control electronics, automation equipment and PCB-based electrical assemblies. Its straight solder-pin arrangement enables vertical mounting on printed circuit boards using conventional through-hole soldering techniques.
With 12 independent electrical contact positions, an IEC rated current of 12 A and a rated voltage of up to 630 V under specified IEC insulation conditions, this male header provides dependable connectivity for suitable industrial applications. Its tin-plated electrolytic copper contacts, shrouded construction and compatibility with appropriately matched WAGO MCS MIDI Classic female connectors make it a practical solution for equipment manufacturers and electronic engineers.
The WAGO MCS MIDI Classic Series provides a modular pluggable connection system for industrial electronic equipment, automation controllers and printed circuit board assemblies. Its male PCB headers and compatible female connectors enable manufacturers to create detachable electrical interfaces between circuit boards and external wiring. The 5.08 mm pitch provides a practical balance between electrical contact spacing, current-carrying capability and efficient PCB layout.
The WAGO 231-342/001-000 uses twelve straight, tin-plated solder pins arranged in a single row. Its through-hole mounting design supports conventional PCB soldering processes, while the four-sided shrouded contact arrangement helps guide compatible female connectors during mating. The 12-pole configuration is particularly useful for control electronics requiring multiple power, control or signal connections through one detachable interface.
Unlike female cable connectors in the MCS MIDI Classic range, this male PCB header does not incorporate CAGE CLAMP® conductor terminals. Electrical connection to the PCB is achieved through soldered pins, while external wiring is terminated using a separately selected compatible female connector. WAGO MCS connectors are not designed for load-breaking operation and must not be connected or disconnected while live or under load. The circuit design must also prevent accessible header contacts from remaining energised when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer part number | 231-342/001-000 | |
| Product type | Straight THT male PCB header | |
| Connector gender | Male | |
| Total number of potentials | 12 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5.08 mm | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | Perpendicular | |
| Solder pin cross-section | 1 × 1 mm | |
| Solder pin length | 5 mm | |
| Number of solder pins per potential | 1 | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Contact pitch span | 55.88 mm between first and last pin centres | |
| Header length | 64.08 mm according to the manufacturer's pole-count dimensional formula | |
| Insulation height above PCB | 12 mm | |
| Connector shroud | Four-sided | |
| Mounting method | PCB through-hole solder mounting | |
| GTIN | 4044918865623 |
The WAGO 231-342/001-000 is a 12-pole straight male PCB header designed to provide a detachable electrical connection between a printed circuit board and a compatible WAGO MCS MIDI Classic female connector.
The connector has 12 poles, providing twelve independent electrical contact positions in a single-row arrangement.
The header has a 5.08 mm pin spacing, equivalent to 0.2 inches, for compatibility with appropriately matched WAGO MCS MIDI Classic connectors.
The header uses through-hole technology (THT) and is mounted by inserting its straight solder pins into a printed circuit board and soldering them in place. The pins have a square cross-section of 1 × 1 mm and a solder tail length of 5 mm.
The WAGO 231-342/001-000 has an IEC rated current of 12 A and a rated voltage of up to 630 V under overvoltage category II, pollution degree 2 conditions. Under IEC category III conditions, the rated voltage is 320 V.
No. This product is a male PCB header with solder pins, rather than a female cable connector with spring pressure conductor terminals. It is designed to mate with compatible female connectors from the WAGO MCS MIDI Classic range.
The WAGO 231-342/001-000 uses 1 × 1 mm square solder pins with a 5 mm solder tail length. PCB hole sizes and pad dimensions should be selected using the manufacturer's dimensional drawing and applicable soldering requirements.
The manufacturer's dimensional formula gives a header length of 64.08 mm for the 12-pole version. The distance between the first and last pin centres is 55.88 mm.
The header has a specified temperature limit range of −60 to +100 °C. The permissible operating conditions of the complete assembly also depend on the PCB, mating connector, current loading and installation environment.
Yes. The WAGO 231-342/001-000 features coding fingers that support connector coding arrangements with appropriately configured mating components. Correct coding helps distinguish connections in equipment containing multiple similar connectors.
No. WAGO MCS connectors are not designed for load-breaking operation. The electrical supply must be isolated before connecting or disconnecting the mating plug, and accessible header contacts must not remain live when unmated.
The header is designed for use with appropriately matched 12-pole WAGO MCS MIDI Classic female connectors having the correct 5.08 mm pitch and mating geometry. Compatibility should be confirmed using the manufacturer's connector documentation.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel manufacturers and industrial automation equipment builders. The WAGO 231-342/001-000 combines twelve reliable male contacts, straight through-hole solder termination and a standardised 5.08 mm pitch to provide a dependable, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.