Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.71
The WAGO 231-340/001-000 is a 10-pole straight through-hole technology (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for printed circuit board connections, it provides a reliable interface between electronic assemblies and compatible pluggable terminal block connectors.
Featuring a 5.08 mm contact pitch, 10 male contacts and 1.0 × 1.0 mm straight solder pins, the WAGO 231-340/001-000 supports vertical PCB mounting. Its enclosed connector housing helps protect the mating interface and supports correct alignment when connecting compatible female connectors.
With an IEC rated current of 12 A, tin-plated copper contacts and an orange polyamide insulating housing, this PCB header is suitable for industrial control electronics, automation equipment and OEM circuit board assemblies. Its pluggable design enables convenient equipment assembly, servicing and replacement without permanently wiring the mating connector to the PCB.
The WAGO 231-340/001-000 provides a practical method of connecting printed circuit boards to external electrical wiring through a compatible pluggable female connector. Its 10-pole configuration allows multiple circuits to be routed through one detachable interface, helping simplify PCB assembly, equipment commissioning and servicing.
The straight THT solder pins support vertical PCB installation, while the enclosed housing helps guide the mating connector into position. This arrangement is useful in industrial controllers, machine electronics, automation interfaces and OEM products where circuit boards must be connected to field wiring or internal cable assemblies.
Important installation note: WAGO MCS connectors are not designed for load breaking. The connector must not be connected or disconnected while live or under load, and the circuit design should prevent accessible header pins from becoming live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-340/001-000 | |
| Product type | Straight THT male PCB header | |
| Connector gender | Male | |
| Number of contact positions | 10 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Termination technology | Through-hole soldering (THT) | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin orientation | Straight | |
| Solder pin length | 5.0 mm | |
| PCB mounting orientation | Vertical | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III / pollution degree 3) | 320 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Mounting type | PCB through-hole mounting | |
| Header orientation | Straight / vertical | |
| Connector housing | Four-sided enclosed, closed-end construction | |
| Contact material | Electrolytic copper | |
| Contact finish | Tin-plated | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Overall width | 53.92 mm | |
| Insulation height | 12.0 mm | |
| GTIN | 4044918865531 |
The WAGO 231-340/001-000 is a 10-pole straight THT male header designed to provide a detachable electrical interface between printed circuit boards and compatible female pluggable connectors in industrial electronic equipment.
The header has 10 male contact positions arranged in a single row with a 5.08 mm contact pitch.
The header is designed for vertical through-hole PCB mounting. It features straight 1.0 × 1.0 mm solder pins with a 5.0 mm pin length, which are inserted into the appropriate PCB holes and soldered.
The header has an IEC rated current of 12 A and an IEC rated voltage of 320 V under overvoltage category III and pollution degree 3. Under category II and pollution degree 2, its IEC voltage rating is 630 V. Listed UL ratings are 600 V and 10 A, subject to the applicable standard and installation conditions.
No. The WAGO MCS connector system is not designed for load breaking. Connections should only be made or separated under electrically safe conditions, and the circuit should be designed so that exposed male header pins are not live when unmated.
WAGO MCS MIDI Classic PCB connectors provide dependable pluggable interfaces for industrial electronic assemblies. Featuring 10 contact positions, a 5.08 mm pitch and straight THT solder pins, the WAGO 231-340/001-000 offers a practical connection solution for PCB designers, automation engineers, control equipment manufacturers and OEM electronics specialists.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.