Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.52
The WAGO 231-339/001-000 is a 9-pole male PCB header from the WAGO 231 Series MCS MIDI Classic pluggable connector range. Designed for industrial electronic equipment and printed circuit board assemblies, this connector features straight through-hole (THT) solder pins, a 5.08 mm contact pitch and a durable orange insulating housing.
With a 12 A IEC rated current and voltage ratings of up to 630 V, depending on the applicable installation category, the WAGO 231-339/001-000 provides a reliable interface between PCB-mounted circuitry and compatible female pluggable connectors.
The connector incorporates 1.0 × 1.0 mm square solder pins with a 5 mm pin length, allowing permanent solder attachment to a suitably designed PCB. Its single-row, nine-position configuration supports organised power, control and signal connections in industrial automation, machine control and modular electronic assemblies.
Technical selection note: The applicable voltage and current ratings depend on the installation category, environmental conditions and complete mating connector assembly. PCB layout, soldering conditions and mating compatibility should be verified against the latest WAGO manufacturer documentation.
The WAGO 231-339/001-000 provides a dependable electrical interface between printed circuit boards and compatible detachable wiring connectors. Its straight through-hole solder terminals create a permanent PCB connection when correctly soldered, while the shrouded male interface supports organised connector mating.
The tin-plated electrolytic copper contacts provide conductive mating surfaces, and the PA66 insulating housing offers mechanical support and electrical insulation. The nine-pole configuration allows multiple circuits to be grouped into one connection point, supporting modular equipment construction and convenient servicing.
For reliable operation, the PCB footprint and soldering process must follow WAGO's installation requirements. The header must be paired with a compatible female connector and used within the applicable electrical ratings. As the MCS system includes connectors without breaking capacity, connections must not be made or broken while live or under load. Circuit design should prevent accessible male contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 9 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-339/001-000 | |
| Series | 231 Series – MCS MIDI Classic | |
| Product type | Straight THT male PCB header | |
| Connector gender | Male | |
| Total number of electrical potentials | 9 | |
| Number of connection levels | 1 | |
| Contact arrangement | Single row | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder pin orientation | Straight | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Nominal pin spacing | 5.08 mm | |
| Recommended PCB drilled-hole diameter | 1.4 mm (+0.1 mm) | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III / pollution degree 3) | 320 V | |
| Rated voltage (IEC, category III / pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 48.84 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 3.05 g | |
| GTIN | 4044918865494 | |
| Country of origin | Germany | |
| Manufacturer catalogue packaging unit | 100 pieces |
The WAGO 231-339/001-000 is a 9-pole MCS MIDI Classic male PCB header featuring straight through-hole solder pins and 5.08 mm contact spacing for detachable electrical connections between circuit boards and compatible female connectors.
The connector has 9 poles, arranged in a single row with one through-hole solder pin per electrical potential.
The WAGO 231-339/001-000 uses through-hole technology (THT) with straight 1.0 × 1.0 mm square solder pins measuring 5 mm in length.
The connector has a 12 A IEC rated current. Its IEC rated voltage is 320 V under overvoltage category III conditions and 630 V under overvoltage category II, pollution degree 2 conditions. The applicable rating depends on the installation and mating arrangement.
The header is designed for compatible 9-pole female connectors from the WAGO MCS MIDI Classic system. The mating connector must match the 5.08 mm pitch and mechanical configuration, with compatibility confirmed using WAGO's manufacturer documentation.
WAGO MCS MIDI Classic connectors provide modular electrical interconnections for industrial electronics, machine building and control equipment. The 231-339/001-000 combines a nine-pole PCB header, straight THT solder terminals and a 5.08 mm contact pitch for organised, serviceable connections between circuit boards and compatible wiring assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.