Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.23
The WAGO 231-338/108-000 is an 8-pole, straight through-hole (THT) male PCB header from the WAGO 231 Series MCS MIDI Classic range. Designed for reliable pluggable electrical connections between printed circuit boards and compatible cable connectors, it features 5.08 mm pin spacing, 1.0 × 1.0 mm square solder pins and an integrated threaded mounting flange for secure connector retention.
With a 12 A rated current and IEC voltage ratings of up to 630 V, depending on overvoltage category and pollution degree, this male header provides a practical solution for industrial automation, electronic control equipment and machinery interfaces.
The connector features an orange PA66 insulating housing, tin-plated electrolytic copper contacts and straight solder terminals for PCB mounting. Its threaded flange supports mechanically secured connections with compatible mating connectors, while integrated coding fingers provide additional options for connector identification and mating arrangements.
Technical selection note: The electrical ratings depend on the applicable installation category, pollution degree, mating connector and complete assembly. PCB layout, soldering conditions and mechanical fastening must follow WAGO's manufacturer documentation.
The WAGO 231-338/108-000 is designed to provide a stable electrical interface between printed circuit boards and compatible pluggable connectors. Its straight through-hole solder pins create a permanent PCB connection when correctly soldered, while the threaded flange provides additional mechanical retention for the mating connector assembly.
The tin-plated electrolytic copper contacts provide conductive mating surfaces, and the PA66 insulating housing offers electrical insulation and mechanical support. Integrated coding fingers allow suitable connector coding arrangements to be implemented, helping distinguish connections in equipment with multiple interfaces.
For safe and reliable operation, the PCB footprint, soldering process, mating connector and fastening arrangement must be selected according to WAGO's instructions. The MCS connector system includes connectors without breaking capacity under IEC/EN 61984; these connectors must not be connected or disconnected while live or under load. Circuit design should also prevent accessible header pins from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-338/108-000 | |
| Series | 231 Series – MCS MIDI Classic | |
| Product type | THT male PCB header with threaded flange | |
| Connector gender | Male | |
| Total number of electrical potentials | 8 | |
| Number of connection levels | 1 | |
| Contact arrangement | Single row | |
| PCB connection technology | Through-hole technology (THT) | |
| Solder pin orientation | Straight | |
| Number of solder pins per potential | 1 | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Nominal pin spacing | 5.08 mm | |
| Recommended PCB drilled-hole diameter | 1.4 mm (+0.1 mm) | |
| Mating direction relative to PCB | 90° | |
| Rated current | 12 A | |
| Rated voltage (IEC, overvoltage category III / pollution degree 3) | 320 V | |
| Rated voltage (IEC, overvoltage category III / pollution degree 2) | 320 V | |
| Rated voltage (IEC, overvoltage category II / pollution degree 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Plug-in connection locking | Threaded flange | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 50.64 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 3.3 g | |
| GTIN | 4044918865470 | |
| Country of origin | Germany | |
| Standard packaging quantity | 100 pieces | |
| Applicable connector standard | IEC/EN 61984 |
The WAGO 231-338/108-000 is an 8-pole MCS MIDI Classic male PCB header featuring straight through-hole solder pins, 5.08 mm contact spacing and a threaded flange for mechanically secured pluggable connections.
The connector has 8 poles, arranged in a single row with one through-hole solder pin per electrical potential.
The threaded flange enables mechanical locking of the header to a compatible mating connector using the appropriate fastening arrangement, helping prevent unintended connector separation.
The WAGO 231-338/108-000 uses straight through-hole solder pins measuring 1.0 × 1.0 mm, with a 5 mm pin length and 5.08 mm contact spacing.
The connector has a 12 A rated current. Its IEC rated voltage is 320 V under overvoltage category III conditions and 630 V under overvoltage category II, pollution degree 2 conditions. The applicable rating depends on the installation and mating arrangement.
WAGO MCS MIDI Classic connectors provide modular electrical interconnections for industrial electronics, machine building and control equipment. The 231-338/108-000 combines an 8-pole PCB header, straight THT solder terminals and threaded-flange retention for organised, mechanically secured connections between circuit boards and compatible wiring assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.